Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Old Unisaw or Grizzly 0771

Featured Replies

So I need some help.  I found this 1948 Unisaw on craigslist for $800, with biesmeyer (spelling?) fence and the mobile base  He said he uses it often for many years.  Downside is it is wired for 220 and I would have to re-wire it for 110.  This is about my exact budget so I am thinking of getting the Grizzly 0771 because with shipping it is almost the exact price plus its new.  I know the fence is better on the craigslist ad but I'm worried about longevity.  I don't mind repairing stuff but I don't really want to mess with getting the bullet motor rebuilt or replacing arbor bearings...  Anyone have any thoughts or advice?

 

http://washingtondc.craigslist.org/nva/tls/5538272531.html

I would get the unisaw. I probably would not pay the price he is asking for it, but I would choose it over the grizzly any day of the week. If you plan on woodworking for a long time you will probably end up selling the 0771 eventually to buy a more powerful saw with a better fence system. Re-wiring the saw for 110 is pretty easy and I am sure there are videos to walk you through it, but I would personally run a 220 line to it. The motor will most likely last as long as the grizzly assuming it has not been worked too hard, and you should be able to check the bearings while you are there looking at it.

All that being said more info on your situation would help to provide a better response.

I love my late model uni and will say that is a beautiful saw. The grizzly will be new with 1 year warranty. 

Is the delta saw hanging the original motor?  If so, that should be the 220 only bullet motor.  If it's newer, I'd make sure it can convert to 110.

I think $800 is on the high end of reasonable.  Could be some wiggle room for negotiation. 

Also,  is there a reason you can't run 220?

The mobile base, brett guard and fence are nice things to have. I question the power on those old unisaws, but people say the 1.5hp bullet motor stronger than its rating. Why are you worried about changing bearings? Looks like the current owner did all that for you when they restored the saw from original condition with modern additions. I have a 2001(I think off the top of my head) unisaw, and they are pretty good saws. Not difficult to work on, and clearly a proven design that has lasted 70+ years. I don't think the Grizzly 0771's fence is nearly as nice as that biesmeyer(I don't like bies myself), the grizzly's guard sucks in comparison to the brett guard, I can almost guarantee the machining is better on the vintage unisaw, and the unisaw is worth $600-700 the day after you buy it. The grizzly is worth $400 the day after you buy it. Finally, you cant negotiate with grizzly on the price, but you can negotiate on craigslist. I would see what maintenance this guy has performed on the unisaw, and see if you can knock 100-150 off the price. $800 should buy you a more modern unisaw with 3hp single phase motor and modern fence. This guy is just a smidge high for his restored saw.

The unisaw looks like a beautiful machine, however I lean toward a Grizzly.  Probably not the 0771 though, shell out the extra $100 and change for the 0715's better fence.  I say this mainly because my head has lately been floating around the idea of a more modern saw with a modern riving knife and dust collection.

That said, if you could get the price of the unisaw down a bit, it would be extremely tempting.

  • Author

Thanks guys! 

My situation is I am an active duty Marine so I move a lot and am currently renting.  I have a large shop but changing any wiring or breakers is out of the question.. I already asked :(  He says that it can be changed to 110 but I have not researched it extensively.  The reason I don't want to mess with bigger maintenance is because I have a small side business of custom furniture (Tables, benches, cabinets) and do not have much shop time as it is and cant be down a saw while I wait.  Plus money is very tight so the "new" idea is very appealing.  On one hand yes its very old so it obviously works but it is also very old.  Im assuming from his setup in the picture and upgrading to a sawstop he has used it pretty heavily..

And I wish I could but after freight and whatnot the next higher saw from grizzly is outside my budget.  I know that 150-250 doesn't seem like much but I've been working for a few years on a 100 dollar Ryobi saw from Lowe's so I think either one will be amazing haha.

Thanks for your service! 

It sounds like the grizzly should serve you well until you get to a more permanent location, even then you may not see the need to upgrade. The grizzly will definitely be a step up from the ryobi. Just in case your mind is not completely made up, I used an old Walker Turner saw from sometime in the 50's with no issues for several years, but it is always a chance on used equipment.

28 minutes ago, Jason Hotze said:

Thanks guys! 

My situation is I am an active duty Marine so I move a lot and am currently renting.  I have a large shop but changing any wiring or breakers is out of the question.. I already asked :(  He says that it can be changed to 110 but I have not researched it extensively.  The reason I don't want to mess with bigger maintenance is because I have a small side business of custom furniture (Tables, benches, cabinets) and do not have much shop time as it is and cant be down a saw while I wait.  Plus money is very tight so the "new" idea is very appealing.  On one hand yes its very old so it obviously works but it is also very old.  Im assuming from his setup in the picture and upgrading to a sawstop he has used it pretty heavily..

And I wish I could but after freight and whatnot the next higher saw from grizzly is outside my budget.  I know that 150-250 doesn't seem like much but I've been working for a few years on a 100 dollar Ryobi saw from Lowe's so I think either one will be amazing haha.

Where are you stationed? Most of our bases have huge wood shops tricked out.

  • Author

I recently checked into HMX-1 on Quantico.  As far as I know there isn't one on the base and I do most of my working later at night when my kids are asleep so I don't know that the idea of hauling lumber to and from base would be an awesome idea other than maybe doing re-sawing or something that needs a large machine I wont have for awhile...  Also that's probably the longest sentence I have used in awhile..

4 minutes ago, Jason Hotze said:

I recently checked into HMX-1 on Quantico.  As far as I know there isn't one on the base and I do most of my working later at night when my kids are asleep so I don't know that the idea of hauling lumber to and from base would be an awesome idea other than maybe doing re-sawing or something that needs a large machine I wont have for awhile...  Also that's probably the longest sentence I have used in awhile..

Yeah,  Quantico doesn't have one that I remember. I used to go use all their milling equipment on pendleton. Full their blades,  they change the dc, it was awesome. 

It would be the Unisaw for me.  I'd like it better if it had a newer 3hp motor, but with the fence and extra stuff, the price is not bad.  I look at CL all the time for woodworking stuff.

  • Author

It comes with the splitter pro jig.. Got the guy down to 700 so I think I'm gonna go with that. Anyone ever re-wired a unisaw from 220 to 110 haha

Sent from my iPhone using Tapatalk

I'd take another Grizzly 715p any day of the week.

40 minutes ago, Jason Hotze said:

It comes with the splitter pro jig.. Got the guy down to 700 so I think I'm gonna go with that. Anyone ever re-wired a unisaw from 220 to 110 haha

Sent from my iPhone using Tapatalk

Yes,  there's a little plate on the motor that shows it by color. 

Everything about the Uni is more robust, it's complete, plus has a Biesemeyer fence.  I'd give up a riving knife in a heartbeat for the heft of the Uni.

1407d1344740497-old-unisaw-imageuploaded

1410d1344740577-old-unisaw-imageuploaded

g0771_det4-7d98cfcd0e129a3a71ce1a81e2e10

 

 

I too would take the Uni over the Grizzly (and I have a few Grizzly tools and am very happy).  However, given your situation, you have to be realistic.  Moving one saw may be as bad as moving another but, the very heft that makes the Uni desirable may be a negative for you; only you can decide that. 

If a lighter saw with a warranty makes more sense for your currently transient lifestyle you will certainly get your money's worth and can upgrade later when you have your own digs. Again, only you can decide what is right for you.

 

P.s.  The fence can make or break a saw so if you go with the lighter saw, at least move to a model with a solid fence.

I did upgrade the fence on my 715 but, there was really nothing wrong with the stock fence.. 

2 hours ago, gee-dub said:

I too would take the Uni over the Grizzly (and I have a few Grizzly tools and am very happy).  However, given your situation, you have to be realistic.  Moving one saw may be as bad as moving another but, the very heft that makes the Uni desirable may be a negative for you; only you can decide that. 

If a lighter saw with a warranty makes more sense for your currently transient lifestyle you will certainly get your money's worth and can upgrade later when you have your own digs. Again, only you can decide what is right for you.

 

P.s.  The fence can make or break a saw so if you go with the lighter saw, at least move to a model with a solid fence.

Good thing about being in the Marine Corps, you always have a few buddies you can bribe with beer to move stuff 

Thankfully this guy listened to reason and made the right choice. I was beginning to worry. 

 

The build quality is considerably different. The price is better. The extras are better. Gah, it wasn't even close!

 

cabinet saws aren't that heavy, and it's on a mobile base so no worries for future moves.  The saw can be broken down into 3 pieces, the table, the cabinet, and the motor. Once in three parts, one man can move each part easily. 

  • Author
  • Popular Post

16d77a138eaf4ff689c4d611f0b3c2dc.jpg

Well I decided on the Uni. There's a reason people still use these 80 years later.

I had to re wire for 110 and other than head scratching for a few hours over the wires having basically no color left to identify them I have it up and running. The splitter jig that came with it is for full kerf so I need thin ones but man this saw runs like a dream. Even after dragging it two hours on a dinky trailer the fence was .002 and just fine in my book.

Did I mention HEAVY this damn thing is??

Sent from my iPhone using Tapatalk

She is smooth like butter. I think I'm in love :)

Sent from my iPhone using Tapatalk

Yeah buddy.. glad you got it all rewired and running.  What size motor is it? When I got my unisaw,  I gave away most of my thin kerf blades. 

If you ever need parts try " The Saw Center "

Micro jig has something like a splitter for full kerf and thin kerf blades. I have the pro version with a metal core. You will need a phenolic zero clearance throat plate.

Congrats on the new (to you) saw !

I have had mine well over 30 years and it's still running fine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.