Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Gone but not forgotten

Featured Replies

With Jorgensen going under earlier this year, i have been on the hunt for the 7200 series bar clamps. If you are unfamiliar with these clamps, they are immensely strong clamps that can take a beating. 7,000lbs of force, i believe. I expected an inventory liquidation at some point, but it never came. Quite the opposite, most online retailers like acme sold out pretty quickly for retail price. I paid $500 for 20 clamps of various lengths and $100 for a uship guy to pick them up from 5 hours away and deliver them. $30 a used clamp isnt a great deal when i bought new ones from acme two years ago for $20-30 a piece; however, used or not they are worth it. I have several i bought from an old millwork shop that are 20-30 years old and still clamp as well as the new ones. This will give me around 40 total from 30"-72". I would like to add some 7-8 footers if i ever find them for the day i make a door or two, but for now my bar clamp thirst should be sated. They can be overkill for smaller projects, but for table tops and other large glue ups, they are a joy to work with. Every parallel bar clamp is a china doll compared to these brutes. You need all kinds, but these are nice to have around if you find them. Shame they may never be in production again. 

00T0T_e6PyFUFf2Ux_1200x900.jpg

I think I have about 6 or 8 of the 8 footers. Rarely use them these days but they really do crank some force when you need it. Using cauls is a must cause those clamps will crush the edge of a board in a heartbeat.

I've said this before, but I will say again that I like the Jorgensen parallel clamps better than the Jets or the Besseys. They have a smoother action and better grip on the handle. I was sad to see them go out of business.

Sent from my iPhone using Tapatalk

16 minutes ago, Dknapp34 said:

I've said this before, but I will say again that I like the Jorgensen parallel clamps better than the Jets or the Besseys. They have a smoother action and better grip on the handle. I was sad to see them go out of business.

Sent from my iPhone using Tapatalk

I have to agree.  I ended up with about half Jet and half Jorgensen.  I grab the Jorgensen parellel clamps first.  I hope that someone will buy the tooling a make them again, but then again the left half of my brain says I have enough clamps.  

I'm sure there have been studies and experiments with clamping pressure and how beneficial thousands upon thousands of pounds of pressure on a properly fitted and glued joint really is.  I'm not interested in reading what is likely uber-sciencey, but I am curious.  I mean seriously...one clamp exerts up to 7000 lbs of pressure, and we put as many clamps as possible on everything we glue up.  It seems very excessive.

5 minutes ago, bleedinblue said:

  I mean seriously...one clamp exerts up to 7000 lbs of pressure, and we put as many clamps as possible on everything we glue up.  It seems very excessive.

It is about balance. Better 1k lbs of force in ten spots than 10k in one spot. The caul would be unweildly for a single spot grab. 

Sometimes even when each joint fits well dry when you start gluing up a complex piece getting a joint to close can take some pressure . I have added a long clamp to a large case to get the diagonals to even up.

2 hours ago, Mike. said:

I have a couple long (maybe 72") ones, but actually don't like them.  They  apply too much force and can easily cup a top.  I never need that much clamping pressure.  The action is nice and smooth though.

Right now I am mostly using jet parallel clamps.  They are okay but kind of heavy.  

I am probably going to buy a bunch of these.  They will be strong enough for anything I do. 

https://www.toolsforworkingwood.com/store/item/MS-ABAR.XX/Universal_Bar_Clamps

Mike, have you used these before? They look pretty cool!

 

14 minutes ago, K Cooper said:

 

14 minutes ago, K Cooper said:

Mike, have you used these before? They look pretty cool!

i know the guy that owns dubuque clamp works where these are apparently made, friend of mine for a long time, i thought he just made wood hand screw clamps, if i get a chance ill stop down and see him, i can always use more clamps.

I see a friends, friends, discount in the foreseeable future;)?

Mike those clamps need to be stiffened or else you get some flex. I know Paul Sellers showed how it was done by fitting with some wood.

  • Popular Post

ill stop down and see him, he's right here in town, I've known him for 40+ years. they do $500.000 worth of clamp business a year and its only Keith his wife Edna and one other guy working there, and he has a kiln and does custom kiln drying also

That would be cool but i doubt that is an option. I bet one of the bigger guys have already done that and turned it out to pasture. 

  • Author
55 minutes ago, Mike. said:

The amount of clamping pressure you need is inversely related to the quality of your milling and joinery

Yes, I agree. I love when i put a joint together and you feel like you could rub the boards together with glue and that would be all the clamping pressure needed. With these clamps, it isnt all about having 1,000,000lbs of pressure, but you have the pressure there when you need it. This comes into play on 8/4 wide boards. It requires some force to close a 1/32-1/16" gap on 12"+ wide 8/4 board. Especially when you have 4 in your panel. Most of all, i just love that i can get glue on these and beat the crap out of them without a second thought. The glue scrapes right off with a chisel and doesnt damage the clamp or clutch. I wonder how long i would be able to do that to my bessey k body bars before i affected the clamping strength? I strictly use the besseys for more delicate glue ups. The jorgensen 7200s are awesome for table tops, countertops, cutting boards etc. The heavy and messy glue ups of thick boards. 

 

Aluminum makes me nervous. I can understand the weight concern, clamps and glue ups get heavy in a hurry.

Some guys forget that just like chisels and table saws, clamps are made for more than one purpose. All the guys blabbing about good joinery not needing heavy clamps have exposed themselves as boring :D Bent lams, kerfed trim, setting windows, setting doors, steam bending etc are places where a few hundred pounds of potential is sometimes better. Just a thought as more of a handyman than fine crafter. 

Those Dubuque clamps look interesting, Dave, see what "friends" pricing may be!  I could use something better than bar clamps..   In fact, I just bought 2 10' pieces of 1/2" pipe for bar clamps for a glue up of some headboards, because I only had 2 that were over 48" long.

C Shaffer hit the nail on the head; clamps aren't just for cutting boards and door panels.  Its a good idea to put the word out.  Maybe a 'WTB' in the classifieds.  I sold my Jorgie I-beam clamps as my need for them wandered off. 

For folks like you wanting the power, reliability and longevity that these fine clamps provide, there is a bounty to be found in other folk's shops where these clamps may be gathering dust in the rafters.  The rub will be getting them to you as the weight often makes shipping costs a deal breaker on heavier items no matter how much we want them ;-).

  • Author
7 minutes ago, gee-dub said:

C Shaffer hit the nail on the head; clamps aren't just for cutting boards and door panels.  Its a good idea to put the word out.  Maybe a 'WTB' in the classifieds.  I sold my Jorgie I-beam clamps as my need for them wandered off. 

For folks like you wanting the power, reliability and longevity that these fine clamps provide, there is a bounty to be found in other folk's shops where these clamps may be gathering dust in the rafters.  The rub will be getting them to you as the weight often makes shipping costs a deal breaker on heavier items no matter how much we want them ;-).

Nope, im cutting myself off! Between buying 15 bessey revo k body clamps in a bundle deal with a kapex and this buy, i am done with clamps. Of course, i could use more small quick grip clamps or F style clamps.....

 

Yes, i originally looked into the cost to ship them via my freight broker. Explain to me how the clamps were $250 to ship, and a 1300lb jointer with lift gate was $350? Roughly the same distance too. Uship ended up working for once at $100. The last time was a bunch of shirtless folk missing teeth with a momma june look-a-like from honey boo boo. 

6 hours ago, Mike. said:

Damn you for making me read a Paul Sellers article! :) 

If I read this correctly, the higher quality US aluminum clamps are 1/8" thick and did not flex.  he was talking about harbor freight clamps when he said they needed to be stiffened.  

You're right, he's definitely talking about the Harbour Freight variety. I've looked at those at our local version of it (Princess Auto) and I can see why they would flex. I was looking at the Dubuque bar clamps in Lee Valley today and they are considerably more substantial. I can't see needing to do anything other than just use them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.