Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adjustable Height Table with Bent Lamination and Live Edge

Featured Replies

  • Popular Post

I’m new to this forum, but have enjoyed looking at some of the other projects people are posting.  Thought I’d share a work in progress…

 

I’m working on an adjustable height table that will convert from a coffee table height to a desk/worktable height using a pulley system.  There’s a little model of the table below, along with some of the full size legs before shaping. 

 

20161128_191840.jpg

The model has rubber bands running between the dowels connecting the tops of the legs, but right now the plan is for that to be a pulley system on the full size version.   I’ve got part of the shaping on the legs done.

 

20170102_200454.jpg

 

Still working on the mechanism that is going to hold these together in place of the dowels in the model.  Right not, I’m thinking a metal pipe with a threaded rod on the inside so I can add some wooden nuts to the outside to hold it tight.  I made a few prototypes of the “nuts” with a T-nut embedded in them to provide metal threads.  I don’t have pictures of that yet though. 

 

The table top is a live edge tope inspired by the Scott Lewis cutting board from fine woodworking.  If you haven’t seen the video, it’s amazing…

 

https://www.youtube.com/watch?v=lR9_CjQYZj4

 

I cut the slab below in half, but wanted to disguise the joint between the two pieces, especially because it’s such a figured board. 20161007_182001.jpg

 

 

I made a curved template with a ½ inch gap using the router, and then used each side of the template to cut the curves on the top and bottom of the slabs.  This is the 2 pieces next to each other with the ½ inch gap in between.

 

20170113_132038.jpg

Then I filled the gap with a ½ inch ribbon using maple, wenge, and cherry strips and clamped it up.

20170113_154335.jpg

I trimmed the excess with a Japanese saw and a block plane.

20170115_163805.jpg16113307_1379701275384806_2133791668733527131_o.jpg

 

 

20170116_163101.jpg

 

I’m planning to add another 2-3 ribbons, and tentatively planned them out with tape.

20170116_191053.jpg

I’ve cut the first one using another MDF template and a ¼ inch router bit with a guide bushing, cut about ¾ inch deep groove.  So far, I’ve got that once glued up and will add the rest of the ribbons in sequence.  You can see some of my templates at the top of the picture below.   Still a work in progress, but it’s been a fun project so far.

 

15975034_1379701332051467_4954172737425194626_o.jpg


Welcome to the forums Anna!  Pretty cool looking project!  Nice work as well!

6 hours ago, wtnhighlander said:

Hi Anna! Glad to have you join. That's some really nice work, and an excellent journal. Keep the updates coming, we LOVE to see pictures!

Yeah, pictures 'cause some of us don't read so good.

Welcome.  Fun project. I like it.

  • Author

Thanks for all the comments!  Yep, the top is curly cherry, and I just love the grain.  The original slab was about It's about 6 1/2 feet long and 20ish inches wide.  I didn't need a really long skinny table though, and cutting it in half helped make it a size that was more practical.   

Welcome.

I really like the way you joined those 2 slabs. Looks great.

Welcome to the forums Anna.  That is some great work you go going there and I am looking forward to the updates.  Is this your shop or are you working out of a maker facility.

Anyone with a giant Festool of2200 picture on their wall is a friend of mine! Welcome to the forum !!

Seriously, where did you get the Festool wall art? Me likey.....

Sent from my SM-N910W8 using Tapatalk

31 minutes ago, shaneymack said:

Anyone with a giant Festool of2200 picture on their wall is a friend of mine! Welcome to the forum !!

Seriously, where did you get the Festool wall art? Me likey.....

 

LOL.  How do you do this.

  • Author

I'm a member of the Woodworkers Club of Rockville, so essentially a Maker's space, but it's 100% woodworking and there's a ton of expertise there between the staff and the other members.  I never noticed the wall art, but that's in the woodcraft store that's attached to the shop.  We get to use just about everything festool makes which has been a huge benefit.

 

4 minutes ago, mat60 said:

LOL.  How do you do this.

Which part?

26 minutes ago, Anna S said:

 

 

Which part?

Shane can spot anything festool from a mile away. :)

  • 4 weeks later...
  • Author
  • Popular Post

update on the tabletop...20170130_140810.jpg

20170130_143122.jpg20170130_143132.jpg

 

then layout the next curves with more tape...20170130_144054.jpg

If you put a piece of paper over the tape you can feel the ridge from the tape through the paper. If you color back and forth over that ridge with a pencil (like doing a rubbing) you can transfer the curve to the paper.  Then cut it out and may another template with MDF and use a router to cut another groove...

20170130_172927.jpg20170130_172943.jpg20170130_204200.jpg

fill the groove with more strips, trim it with the Japanese saw and plane it down...

20170130_204229.jpg

one more ribbon to go...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.