Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Black Walnut wood gloat

Featured Replies

  • Popular Post

We just harvested two large black walnut trees over the weekend in central Washington State (Wenatchee to be exact).  The trees are circa 1904.  We started some of the prep work last weekend.  Just wanted to show off some of our spoils.  My Father, middle son and me worked the ground.  We hired a tree cutter to bring the trees down.  We also hired a trucker to transport the logs over to where we will have them cut which is about 140 miles away from this location and about 30 miles from where I live.  The last photo is what we decided to keep as potential for use aside from the main trunks.  Wow, a lot of work but these should yield some sweet wood.  We are leaning towards harvesting the stumps too, but that's for another time.

Walnut_1.JPG

Walnut_2.JPG

Walnut_3.JPG

Walnut_4.JPG

Walnut_5.JPG

Walnut_6.JPG

Most sawyers around here wouldn't even allow those trees on their property. Anything that was close to any building or houses. To much chance of fence wire, clothes line hooks or other metal embedded in the logs. Even most portable mill guys shy away. Looks great and good luck. Show us some projects when the lumber is ready. 

  • Author
26 minutes ago, woodbutcher74 said:

Most sawyers around here wouldn't even allow those trees on their property. Anything that was close to any building or houses. To much chance of fence wire, clothes line hooks or other metal embedded in the logs. Even most portable mill guys shy away. Looks great and good luck. Show us some projects when the lumber is ready. 

We did notice where some metal was early on in the tree's life.  You can just make it out under my son's right foot in the fourth picture.  No sign of metal there now, but the black stain indicates it was there.

We will be getting it all cut later this week, will post more pix if there is anything worth noting at that point. 

Great bunch of wood!  But I have a question.  What the hell is that blue stuff and bright shiny thing in the 1st picture?  It's been so long I forgot their names!  Gonna have to head to the right side of the state to get me some.

  • Author
18 minutes ago, Just Bob said:

Great bunch of wood!  But I have a question.  What the hell is that blue stuff and bright shiny thing in the 1st picture?  It's been so long I forgot their names!  Gonna have to head to the right side of the state to get me some.

Ha ha, ya it was a great day to do this for sure!

Have you given an thought as to how you want it milled, thickness wise? Unless you want to sell the tabletop thickness slabs, you may want to consider 4/4 and 5/4. Voice of experience. 

A couple nice logs there.  FYI, the branches are no good for furniture because there's too much tension in them.  Chunk them up for turning stock or firewood.  Also FYI...you can just call it "walnut." ;)

  • Popular Post

Not that i have trees milled up every other weekend to my specs, but i vote thicker than 4/4. I have 300-400 bdft of 4/4 cherry on my rack and i constantly think about selling it, because 98% of what i make is thicker than 3/4". Some things to maybe consider; you are going to get a ton of bdft out of those logs so your price will be very very low per bdft, and the logs are big so you will have wide boards after they are milled up. Wide boards means more chance for cupping and deformity. A 12-20" wide, a 4/4 board doesnt have much room for cupping before it becomes the thickness of a sheet of paper post milling. Next, you can always resaw or plane thickness away, tough to add it. Finally, the last thing i would do is be very OCD on organizing the lumber throughout its journey from mill to kiln to your shop. It would suck to jumble up both trees and miss out on sequential boards from the same log. Not a huge deal, but a little effort up front will pay dividends down the line with projects having superb continuity.

I chainsaw mill so I never want to go lower than 8/4 for time, gas cost, wear and tear and lost wood in the kerf reasons but I also love the ability the thicker lumber gives you to grain match.

  • Author

Current plan for large stuff is 12/4 and 10/4.  We are also considering pulling the root balls in the hopes of getting some decent gunstock material.  Already had a discussion with a local guy that has done this and I was shocked at how much gunstock material is worth.

7 hours ago, ChiknNutz said:

Current plan for large stuff is 12/4 and 10/4.  We are also considering pulling the root balls in the hopes of getting some decent gunstock material.  Already had a discussion with a local guy that has done this and I was shocked at how much gunstock material is worth.

Yeah it's a fetish really. Some aaaa fiddle stocks pre shaped will run a grand for the consecutive butt and fore piece

10 hours ago, Eric. said:

you can just call it "walnut." ;)

My theory on why people call it Black Walnut is because the Latin name is Juglans niger. That equals "Black Walnut".

Juglans is the genus of walnut trees. There are all kinds of walnut trees in the genus Juglans, but the one we use for furniture is the species "Black Walnut".

Wiki on Walnut

5 minutes ago, davewyo said:

My theory on why people call it Black Walnut is because the Latin name is Juglans niger. That equals "Black Walnut".

Juglans is the genus of walnut trees. There are all kinds of walnut trees in the genus Juglans, but the one we use for furniture is the species "Black Walnut".

Wiki on Walnut

Understood, but since there's only one predominant walnut species in the US, it's fine to just say "walnut" because everyone will know exactly what you're talking about.  "Black walnut" just sounds pretentious to me, that's all.  Or the opposite, amateurish.  It usually implies lack of knowledge to me when I hear it.

It would be like going to a baseball game and telling someone you want a "ballpark hot dog."  I mean WTF other kind of hot dog are you gonna get? 

  • Author

 

Understood, but since there's only one predominant walnut species in the US, it's fine to just say "walnut" because everyone will know exactly what you're talking about.  "Black walnut" just sounds pretentious to me, that's all.  Or the opposite, amateurish.  It usually implies lack of knowledge to me when I hear it.

 

It would be like going to a baseball game and telling someone you want a "ballpark hot dog."  I mean WTF other kind of hot dog are you gonna get? 

 

 

 

 

Huh, well since there is also Claro and English Walnut out there, thought it better to be precise rather than generic. How is that being ignorant?

 

 

 

Sent from my iPhone using Tapatalk

 

  • Popular Post
Just now, Eric. said:

It would be like going to a baseball game and telling someone you want a "ballpark hot dog."  I mean WTF other kind of hot dog are you gonna get? 

Oh man! I nearly shot malted beverage through my sinuses on that one!:) I totally get what you're saying; I feel the same. ...I just figured hearing that people are actually correct when they say "Black Walnut" would help in some kind of way.

For the record, I don't go in to the lumber yard and ask for black walnut. I imagine they would think I'm asking for some particularly dark Walnut and tell me to go look and see if I find any walnut that's black enough.

Current plan for large stuff is 12/4 and 10/4.  We are also considering pulling the root balls in the hopes of getting some decent gunstock material.  Already had a discussion with a local guy that has done this and I was shocked at how much gunstock material is worth.

Beware that some of the cost in gunstock material is involved in drying it. I read somewhere that the Henry Firearms company won't use walnut until it hasbeen air dried AT MINIMUM, seven years.

10 hours ago, ChiknNutz said:

Huh, well since there is also Claro and English Walnut out there, thought it better to be precise rather than generic.

When people are talking about Claro and English walnut, they ALWAYS specify Claro or English, because otherwise everyone would think they're talking about regular old walnut...because when you simply say "walnut," everyone knows you're talking about regular old walnut...which is why you only have to say "walnut."

It's just a pet peeve of mine.  Carry on.

i agree on others on the sawing of lumber, dont cut it all into 4/4 make some 8/4 and some 6/4 as well usually the sawyers setting for 4/4 will end you a cleaned board of 7/8"   they usually cut at 1.125 when cutting 4/4  lumber to allow for drying and better use of the lumber.  nice haul and marking it to show which tree and secession of cuts is spot on for good grain matching. as for the short pieces you saved the tension is going to be noticeable so cut it thick,, around me the saw mills use the upper logs for 8/4 then send to a kiln.

There's a lot of literature out on the net about walnut.  Black walnut (East and West coast) is a specific tree that's different from walnut.

Here's an interesting read on Western Black Walnut for anyone interested.

http://www.ccffa-oswa.org/NWWoodlands/other-trees-to-grow/2005spring-WesternBlackWalnut.pdf

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.