Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Harbor Freight DC Performance and Reliability

Featured Replies

Hi,

I need to add a dust collector and am considering the HF 2 HP collector.   My shop is a basement shop.  The DC will be moved to each tool when needed rather than using ductwork.     Ducts may be an upgrade in the future.  The tools involved are table saw, 6" jointer, 12" planer, 12" miter saw, drill press, router table, perhaps the lathe.  Now that I listed them, ducts sound better and better.

I have a few questions about the HF collector, for current owners.  From other threads it seems like it would easily handle each tool.   Do you guys who have this unit agree?  Have you successfully used ducts with it?

My other question is on reliability.  I read lots of reviews where people love the DC but the reviews are only days or a few months old.  Has anyone had this unit for years?  Has it been reliable.

I also plan on picking up the .5 micron filter from Wynn.

Thanks

George

 

Ive had mine about 2 yrs and had no problems. It works excellent on the jointer, planer, spindle sander and router table (depending on the operation). With no over the blade assistance its pretty weak on the tablesaw, but i cant rly fault the machine for that.

 

The filter bag is a weak point but works until u can get a real filter for it. And of course a separator of some sort would greatly improve the whole system.

 

After about a week of moving hoses around to your tools, youll want ducting. Its easy to install and not terribly expensive if you lay it out strategically.

 

Overall i'd say its good. Its one of the few woodworking tools you can go cheap on and just upgrade over time.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

I have had mine for over 8 years.  You will defiantly want to put a filter on it, before you use it.  Otherwise it will just be a dust spreader.  

If you do it like a lot of us, the blower just makes up a small part of the system.  Add a cyclone, a filter, pipe and/or hose, fittings, build a stand, and your $150 dust collector turns into a $600 dust collector.  If the motor burns out in three years, replacing it is relatively cheap and easy. 

Had mine for 2 years, and it dumps outside.  It's ducted to 3 machines, TS, Jointer and Planer.   Not a single problem and it works just fine.

I've got nearly 5 years.  No real problems.  Changing the bag is a royal PIA,  but it hasn't burped. Add a Wynne filter and you've got a complete system. 

Just now, bobwax said:

I've got nearly 5 years.  No real problems.  Changing the bag is a royal PIA,  but it hasn't burped. Add a Wynne filter and you've got a complete system. 

 

  • Author

Thanks for the info.  Just retired recently and there are a lot of upgrades I need to make to my shop now that I am spending a lot more time down there.  Dust collection is first on the list.  Just got a 3M respirator with P100 filters.  Then there is upgrading the lighting, doing some wiring and......  I may have to get a job.

I've had mine a year. Some people got worried when HF changed the color and SKU number, but best as I can tell its still the same old workhorse. I've got mine on a cyclone, with a pair of flex hoses. It works well enough on the tablesaw, but as shepherd said, its not perfect with only lower collection. Even with the Wynn filter, keep your dust mask on and try and pick up an air cleaner (the little grizzly model works pretty well for small spaces), this level of collector is good for cleanliness, not safety.

  • Author

There are two units with different SKUs on the HF website for the DC. HF customer service says they are the same, just a different color.  However, when you look at the specs, one is listed as 15 amp and the other at 20 amp.

I plan on adding a Thien baffle along with the Wynn filterand see how that works out.  I used a squirrel cage unit, that I saved from an FHA furnace that I replaced, to make an air "filter".   Not really a filter, it is just a box on the ceiling that sucks in shop air and blows it outside.  Whenever I'm making saw dust I turn that on and let it run for a while before I take off the respirator.

  • 2 weeks later...
On 5/1/2017 at 4:24 PM, georgepag said:

 

There are two units with different SKUs on the HF website for the DC

 

Not sure about this anymore... The SKU ending in 69 has a metal impeller. Which is better than plastic. 

Just tossing this out there for fans of the HF who are on the fence.  If you're on their email list there is a 25% off coupon for Mother's Day today.

HF MD.JPG

  • 4 weeks later...

I bought the HF dust collector last night and put it together.

It seems fine, but...

The display model seemed to have a reasonably nice filter bag.   What came in my box was a 100 thread bed sheet sewn into a filter bag.   No way that's filtering to 5 microns, more like 500...   That's going to need to be replaced.   I found a Powertec 700001 filter bag on amazon for $30 people report as working much better.   It's only $30, so that'll be my first step before going the whole canister route.

And putting the bag on the bottom was a pain... I got this to handle my planer/jointer out in the garage along with table saw.   So I'm expecting to fill the bag fairly frequently.

So eventually I'll probably add a cyclone.

So the idea of a $150 dust collector turning into a $600 one is spot on.

 

The HF is definitely a starting point, with a long journey attached. I just switched mine to exhaust outside, and I can't tell you how much nicer that is. Boosted my CFM noticeably, and there's less re-circulation of dust inside the shop.

Bingo.

5 microns is pretty big for a DC that will vent into your work area.  Almost a dust spreader as opposed to a dust collector; good for chip collection though.

microns.JPG.eb8740956f8f01a493879c923cadb806.JPG

I think the HF unit is a big step up from a shop vac.  My old Delta 1HP bagger came with a 5 micron bag and it was a joke; a fine mist of dust ended up all over everything.  I replaced the bag with an American Fabric Filter after market bag and made it usable. 

Another common boo-boo is running a bag as a filter that is inadequately sized.  If your bag blows up like a balloon it is providing too much back pressure on the system.  It should remain soft; maybe not deflated but, definitely not tight.  You can see the recommended surface area for a given CFM using the Air to Cloth Calculator here. 

The size (and cost) can be quite surprising and generally leads folks to a filter cartridge.  If you have the space, bags are pretty resilient and easier to clean when "over-seasoned".  My shop is in my garage so I don't have room for a bag house ;).

On 5/13/2017 at 2:59 PM, Llama said:

Not sure about this anymore... The SKU ending in 69 has a metal impeller. Which is better than plastic. 

I would agree with that.  However, that unit is also a little heavier (101lbs versus 98) which apparently kicks in the "Overweight Item subject to 14.95 additional Freight Charge"

 

 

Bought mine a year and a half ago, It sucks.............good, and mine is vented outside.

  • 2 weeks later...

I have never gone cheap on dust collection. It's just too important. For me, getting the best possible filtration on the filter and a high level of air movement are the most important. Actually the end result is the most important. Also, I like being able to use the tools I buy out of the box rather than setting up the tool for use and then spending hours upgrading or improving its operation. Therefore, while good dust collectors are not cheap, I have found that, when you buy the higher quality, you never have to mess with it again. Plus, it does the best possible job. It's just what works for me though. I know a lot of woodworkers who enjoy the upgrading and improving part.

  • 4 weeks later...

I've had the HF 2hp dust collector for over 3 years. It sits in the attic space above my garage shop. I built a thein top hat separator that sits on a 20 gal steel garbage can, then the fines are ducted outside. I ran 5" ductwork throughout my shop reduced to 4" at each machine. I have plenty of suction because of no bag or filter. No accumulation outside UNLESS I forget to empty the can. The only thing I would do different is a larger can for the thein top hat to sit on. It fills up too fast.

 

 

Sent from my iPhone using Tapatalk

I've had the HF 2hp dust collector for over 3 years. It sits in the attic space above my garage shop. I built a thein top hat separator that sits on a 20 gal steel garbage can, then the fines are ducted outside.

 

I plan on getting one of these for a workshop in an outbuilding now under construction. I am also planning on attic mounting and ducting to outside. But being a newbie, I need to ask: what is involved mechanically to vent one outside? I am assuming that the airflow normally going into the top bag is what we are talking about, but I have never seen an example of HOW to do it. Do you have suggestions and/or pictures?

 

I want to do attic mounting because I need to make best use of scarce floor space in the workshop. The attic will actually have more stand-up floor space than the shop!

 

I am in a semi-rural area so bothering the neighbors is not an issue. Besides, I'm sure my RAS will make more noise. Considerations like walnut dust are not an issue either as there are a couple of walnut trees on the property.

 

Note: I am returning to woodworking after a break of about 30 years. (Something about those pesky day jobs.) So I consider myself a newbie again, having to re-learn procedures and procedures, and refurbishing many of my old tools.

 

 

Sent from my VS995 using Tapatalk

 

 

I have had the HF dust collector for about 6 years now. Hobbyist so definitely not working it every day but certainly a few days (sometimes weeks) a month. A LOT of people modify them through various means but the only thing I have done is put on the powertec filter bag you buy on amazon. The powertec bag is too big but can be made to work. By moving the dust collector from machine to machine I have made up for its lack of overwhelming power. At most I have 10 feet of flexihose between the collector and the machine. Its perfectly adequate for my 3hp sawstop, 12" planer, 8" jointer etc etc. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.