Popular Post woodbutcher Posted October 7, 2017 Popular Post Report Posted October 7, 2017 Ive been needing something to get my planer off the floor since I bought it. And since I just moved into a new shop space, I figured a good shop warming project would be to make a planer cart. I also needed some general stuff storage, so i made the cart to do double duty. It took quite a while to finish, but Im mostly really happy with how it turned out. Ill fill in the mostly later. Heres the first side. The cabinet is made with baltic birch plywood. This side has the four drawers, constructed with a rabbeted lock joint. It was my first time using that joint for drawers, and I have to say, they are fun and easy to make. I have alot to learn about how to install the drawers using drawer slides though. I will do it differently next time. In fact someday when I am in need of a shop improvement project, I may remake the drawers, and put the drawer slides in properly. I ended up making the drawers about a 1/4" too narrow, thats why id remake them. Better than too wide i guess, I just had to use 1/8" ply to shim the sides. Behind the drawers I set a divider in dados to be the back stop for the shelves on the other side, seen here. I set the top and bottom into rabbets in the side of the case. The face frame was put together with pocket screws. The door was my favorite part of the build. I figured i would use the opportunity to try a new technique, making a door with mortise and tenon joinery. The joints came out great, the best fitting mortise and tenons Ive made thus far in my short time of woodworking. It was very satisfying and confidence building to make M&T"s that fit just about perfect. I dressed up the drawer fronts and door with trim that is rounded over on the front edges. I like the detail, but they are a bit tedious to make and apply. I still have to add the drawer and door pulls, but thats something for another day. Im just glad to have the project done so i can use it, and move onto other things. Heres a couple pictures of the shop as it sits today. Thanks for reading. 9 Quote
gee-dub Posted October 7, 2017 Report Posted October 7, 2017 A great effort. I always build storage into my machine stands. 2 Quote
Popular Post minorhero Posted October 7, 2017 Popular Post Report Posted October 7, 2017 Your shop seems to be suffering from a serious case of "too clean." I mean I completely understand wanting it to be a bit tidy when you take a picture but my goodness there are limits!! ;P 3 1 Quote
Coop Posted October 7, 2017 Report Posted October 7, 2017 18 minutes ago, minorhero said: Your shop seems to be suffering from a serious case of "too clean." I mean I completely understand wanting it to be a bit tidy when you take a picture but my goodness there are limits!! ;P I agree! When I see pics like that, it gives me about 15 seconds of guilt! Good looking cart man! 1 Quote
Eric. Posted October 7, 2017 Report Posted October 7, 2017 The cock beading is a nice touch. And I never pass up an opportunity to say cock beading. 2 Quote
mat60 Posted October 7, 2017 Report Posted October 7, 2017 Nice job with the storage/planer cabinet I must admit my shop has never looked as clean as yours. 2 Quote
woodbutcher Posted October 7, 2017 Author Report Posted October 7, 2017 Thanks everyone! I had just picked and swept up right before i took the pictures, so dont feel too bad guys haha. I really dont like the shop being too messy, i find it way more enjoyable to be in the shop when its clean. And Eric, is it really called cock beading haha? Quote
wdwerker Posted October 7, 2017 Report Posted October 7, 2017 Yep, it's definitely called cock beading. 2 Quote
lewisc Posted October 7, 2017 Report Posted October 7, 2017 Cool trolley. A great use of the space. 1 Quote
pkinneb Posted October 7, 2017 Report Posted October 7, 2017 Great execution and great use of space! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.