Recommended Posts

Posted

Now that’s one spoiled puppy! I guess I’m in the minority here about breaking down boards as I use my circ saw. What kind of blade do you use? 

Posted

Thanks guys. With the time change it wasn't as late as I thought so I got a little more done before knocking off.

There are a couple of voids on the back where they will never show . . . of course I have to fill them.  If nothing else, it's practice.  A tiny drop of black dye in some epoxy is more than enough for these two.

5a01211fccc4d_DogBedFrame(15).jpg.8f08e9a8705a4c164f88cfeece2a2c99.jpg

5a0121206bb8d_DogBedFrame(16).jpg.bc4765dd8a52993ca6e9c0bf8fb3a562.jpg

5a01212102a3e_DogBedFrame(17).jpg.d72a729827db5d693dfa19ee826967ff.jpg

I go ahead and mark out the curves for the front piece and cut them out on the bandsaw.

5a01212192116_DogBedFrame(18).jpg.9077d73c46a5a8cb1b627c805f07aba9.jpg

5a0121222e46a_DogBedFrame(19).jpg.39a74a0ebec9e843aae01d5b488e79c3.jpg

That outta do it for now . . . 

  • Like 1
Posted
56 minutes ago, K Cooper said:

Now that’s one spoiled puppy! I guess I’m in the minority here about breaking down boards as I use my circ saw. What kind of blade do you use? 

Yes she is.  I use a circ saw for thinner stock and sheet goods.  I use a Bosch T101BF in the jig saw for things up to about 6/4.  Takes up a lot less room than a CMS.  I've got a longer blade for thicker stock.  The Bosch cuts like 'buttah' with the right blade for the task.

  • Thanks 1
Posted

Man i live in the frigid north and we don't have a fire place. I wish i had one but this house didnn't come with one and i don't ever want to move again.

I feel like there has been a lot of hate on CMSs lately. I mean i agree with the points but it seems all of a sudden.

Posted
5 minutes ago, Chestnut said:

I feel like there has been a lot of hate on CMSs lately. I mean i agree with the points but it seems all of a sudden.

Sorry, I didn't mean to contribute to any hate-fest :).  I have a CMS out in the shed.  When I need to cut long thin stock I roll it out and use it.  If I did a lot of that sort of thing I would definitely make room for one in my shop.  I only use one every few years so mine is relegated to the shed but, you notice I still have one ;).

Posted
4 minutes ago, gee-dub said:

Sorry, I didn't mean to contribute to any hate-fest :).  I have a CMS out in the shed.  When I need to cut long thin stock I roll it out and use it.  If I did a lot of that sort of thing I would definitely make room for one in my shop.  I only use one every few years so mine is relegated to the shed but, you notice I still have one ;).

I didn't mean to accuse you of that sorry. It just kinda surprised me that some people loved them and then all of a sudden the tides turned. I do too many construction type projects to not have one. Beings that i had space and it worked I got it calibrated to be accurate. The thing is a terrible dust mess though and that is annoying. Sorry now i feel like i sullied your wonderful build with some negativity.

Posted
1 hour ago, Chet said:

gee, how do you go about shimming your work on the planer sled?  I don't see anything in place in the photos.

Looks like there are wedges on each end of the perpendicular boards that he adjusts to reduce rocking. I'd be interested in more detail.

Untitled.thumb.jpg.ccdb53440d4b00e8afd70ccf9c52bb50.jpg

Posted
3 hours ago, bushwacked said:

it is a shop notes sled ... 

ShopNotes has a much more elegant solution:

5938206785edc_planersledcovershot.JPG.163a068ffc24e6a522e78b883c4e4b82.JPG

Mine is from a Keith Rust article in Fine Woodworking.  If the ShopNotes version had been around back when I made one, I would have made theirs . . . Of course that's easy to say now ;-)  The Keith Rust version can be made in a few hours though.  I used stair tread anti-slip for the cleats and the wedges and it's still working. Mine is 60” long.

  • Like 2
  • 2 weeks later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 66 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined