Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The "Lunch After Thanksgiving" Desk

Featured Replies

  • Author

Thanks, Drew. Yes, the finish could be better. There are a couple of runs / sags around edges, that probably wouldn't have happened with a spray application. The paint actually leveled quite well after application with the foam brush, but the very flat sheen made it easy to miss a slight run or two. Fortunately, they aren't in prominent locations. As for the bead trim, I think I mentioned some trick for cutting the miter to fit, but not making the trim itself. It is just 1/4" strips ripped from 1" stock. Both edges of the front were routed with a 1/8" radius round-over, and the strips were glued onto the case and drawer front edges. To size the drawer front correctly, I stacked 2 scraps of the trim + the 1/8" thicknes of a combo square rule into the drawer opening, held the drawer front blank against all that and marked the opposite edge of the opening onto the front. Repeat for both directions, and out pops a perfect 1/16" reveal.

  • Replies 58
  • Views 17.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • wtnhighlander
    wtnhighlander

    Photo-dump ahead! Catching up on several short work sessions. The drawers needed a central divider to support the slides, so I added on, using a sliding dovetail for strength. Clamps, scraps

  • wtnhighlander
    wtnhighlander

    Final installment. First, I flipped the case upside-down to attach the top. The front edge is screwed through a cleat that was glued across the inside of the upper apron rail. Icepick helps re-align t

  • wtnhighlander
    wtnhighlander

    Teaser photo: this pile of walnut, cherry, and mulberry is about to start a new life as a shaker-inspired, trestle base writing desk.  The cheesy title comes from it consisting of a bunch o

Posted Images

  • Author

@Chet, yes that is GF 'Milk Paint' in Gulfstream Blue. Looks as green as it can be to me, but they call it blue.

Wife likes the fresh, clean look, but I think rubbing in some dark wax to emphasize the shadow lines and creating an aged patina would look great on this color.

I’m learning so much on this forum, wife wants some new cabinets for one wall in the kitchen and she wants them painted, perfect project to put off till spring 

12 minutes ago, treeslayer said:

I’m learning so much on this forum, wife wants some new cabinets for one wall in the kitchen and she wants them painted, perfect project to put off till spring 

Cluck, cluck!

  • Author

Dave, the GF milk paint and High Performance are a good combo to paint in place. There was no odor that I could detect, at all. Wife is usually bothered by oil finishes for several days or weeks after they are cured enough to handle, she never even mentioned smelling this stuff.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.