Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sewing Cabinet

Featured Replies

  • Popular Post

As promised ... my new sewing machine has done its sewing jobs, and now it's time to build it a new home.

I thought I'd start this journal while I'm still finishing up the design phase. The plan is for a cabinet that will hold the machine and various other sewing tools and supplies, that can sit in a corner while not in use ... then be pulled out and opened up to provide a bigger work surface while in use.

st2.JPG.e6def1979cb7c33862534991facd43d4.JPG

st1.thumb.JPG.96fc2c44d5a3ce3a55574903dd15b897.JPG

Obviously there is a lot of detail not included in these sketches, I'm really concentrating on getting the dimentions right and thinking about joinery. I still haven't figured out how the doors will latch to the top in the open position to stop it shifting while open ... hopefully something will get worked out by the end.

The drawer fronts on the right are mostly just a cosmetic facade to make it look more symmetrical when open, there will be some space behind the upper ones that can somehow get used. The drawers on the left are real.

I wanted to recess the lower drawers, so that some useable shelves could be included in the doors for easy access storage when the cabinet is open (I just sketched in some generic shelves for now). But this really makes the joinery for the case to hold the lower drawers a bit more complicated. Hopefully I can figure out something strong enough.

st3.thumb.JPG.361c0eba41182323093b9e241c15e9b8.JPG

st4.thumb.JPG.dd0c797d437074a006da291bfb141419.JPG

I'm not quite sure if I've really worked it out properly ... maybe it will become more apparent when thinhgs start to go together.

I haven't bought the lift hardware, or the wood yet ... I'm thinking of using African Mahogany (Khaya), but may go for cherry, depending on what is available. If I make the turned legs, I'll need to be able to get some 12/4.

We'll see how much I can get done in the next two months ...

  • Replies 164
  • Views 35.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I've got most of the carving done on the right hand door. It still needs a bit of cleaning up and sanding.

  • As always not too exciting to start with ... Ripping at the bandsaw and then jointing pieces to size. Then laying out and chopping mortices for the carcase. Then ploughing grooves for

  • Amen brother.  I earned mine, go git yer own.

Posted Images

The design and thought put into it are definitely impressive. Will be watching for the journal, and from what I've seen of your previous work, you're the one to pull it off.

Wow!! That has to be one of the fanciest sewing cabinets I have ever seen! I look forward to following along on your journey.

+1 but I'm going to have to keep their thread hidden from my wife.

  • Popular Post

My wife said that's enough to make her want to take up sewing.  Really cool.

  • Author
  • Popular Post

well, thereès nothing impressive here yet ... anyone can dream up a fancy design.

Time to start trying to turn it into reality ... I went to the lumber store today, and picked up some Khaya. I've only used this for small projects in the past, so I hope it turns out good for this. I couldn't get the 12/4 I wanted for the turned legs. There is another store in town that might have some before I have to start thinking about other possibilities.

IMG_20250206_144501242.thumb.jpg.15e90a5ba452d21a363f21fc239e9da5.jpg

IMG_20250206_153733099.thumb.jpg.6c37684cfba949448a92a41491c44735.jpg

 

  • Author
  • Popular Post
On 2/6/2025 at 7:04 PM, wtnhighlander said:

I'm impressed that your town has TWO lumber stores that carry exotics like khaya! I have drive a minimum of 2 hours to find just one.

It is quite a big city so lots of wood being sold, but the main lumber yards only sell to commercial businesses ... however we do have two stores catering to hobbyists/individuals ... sometimes their stock of a particular species is limited, but 12/4 khaya is sometimes on the rack.

  • Author
  • Popular Post

Well darn it ... it appears that Khaya has recently been CITES listed, and although there is lots of 4/4 and 8/4 available, 12/4 just doesn't seem to be coming into Canada at the moment. None of the places I've talked to either have it in stock, nor can they get it from their suppliers.

So I can either:

- Redesign the legs to be square and just use 8/4.

- Try to laminate some extra thickness onto the 8/4 to get a thick enough piece to be turned ... but hiding the glue line might be tricky.

- Use Sapele instead for the turned legs ... I even have a suitable piece left over from the last project, so that will even save me $100 in lumber cost. Given that there will be a change from planed to turned wood anyway, some care with the finishing and the difference may be hardly noticable.

  • Author
On 2/7/2025 at 1:18 PM, wtnhighlander said:

The turned legs are just the segment below the carcase, right? Not integral to the square corners? If so, I like the plan to use sepele. The slight difference in species will go unnoticed, since there is a natural break between to components.

That's right ... my lathe isn't big enough to mount the whole leg ... so I was just going to turn a ~7/8" tenon about 2" long on the round part and glue it into a drilled hole at the end of the square part, which I hope should be strong enough.

On 2/7/2025 at 2:18 PM, wtnhighlander said:

The turned legs are just the segment below the carcase, right? Not integral to the square corners? If so, I like the plan to use sepele. The slight difference in species will go unnoticed, since there is a natural break between to components.

+1 on using sapele. Nobody is going to be looking at the feet anyway with the rest of it so beautifully ornate.

  • Author
  • Popular Post
On 2/8/2025 at 8:28 AM, Mark J said:

Use sepele for the entire piece??

That is an option, but I made the last project out of Sapele, and I was wanting to use something different.

But I also have some nice Khaya crotch veneer that I was thinking of using for the panels, so there'd still be a species difference if the whole carcase was made of Sapele.

I tried putting a bit of finish on some of the khaya today to compare it with the finished sapele cabinet ... I think the mismatch will be acceptable ... so at the moment I'm planning on using the sapele.

IMG_20250210_162913765.thumb.jpg.0edfff372db10da84ae2e877e08ad29a.jpg

  • Author
  • Popular Post

As always not too exciting to start with ...

Ripping at the bandsaw and then jointing pieces to size. Then laying out and chopping mortices for the carcase.

IMG_20250214_114403995.thumb.jpg.08a46fff7bb363f419f30e73310b79ef.jpg

Then ploughing grooves for the panels.

IMG_20250214_195045758.thumb.jpg.5288c231929e117598238460e98a3420.jpg

As you can see I've also got a new apprentice ... he's not allowed to help when power tools are in use, but fortunatelythat's not too much of my time.

  • Author
  • Popular Post

A little more progress ... cutting tenons and I now have three sides of the carcase.

IMG_20250216_112306877.thumb.jpg.2ad26aa02fa5bae5ca5c1ce6ee138b58.jpg

IMG_20250216_114946813.thumb.jpg.3a9a250b43819f850e237b6f0f3c3b1c.jpg

Next I have to start working on the front, which is going to be more complicated because of the drawers, and the recess for in-door storage.

  • Author
  • Popular Post

Becaise the lower drawers are recessed the front leg is too far forward and needs to be "extended" into the carcase. I also added the side runners for the drawers into the side frames.

IMG_20250217_131134795.thumb.jpg.955effe725480befcc45ac32ea18196e.jpg

However, because 2 pieces of 4/4 are a bit thicker than 1 board of 8/4, I had to remove a bit of the lower one since it overlapped with the outside of the frame.

IMG_20250217_130644498.thumb.jpg.354d995a17d5b29fca0550f1f9533210.jpg

The two parts on the front of the carcase can then be added. The upper one is held in by dovetails, and the lower one with M&T joints.

IMG_20250217_205319499.thumb.jpg.1b5408ebcd3381b188aa8cb3569f0017.jpg

IMG_20250217_205412553.thumb.jpg.1ddbc2ef040df291edfccabb891ef626.jpg

IMG_20250217_205404500.thumb.jpg.337c30e3fc16fb47109d1f232f079be0.jpg

The next step will be the casework for the inside of the lower drawers.

Just in case you haven't considered it, you have my cross-grain wood movement tingles going with that upper stretcher going into the side rails and the legs. I think it's OK, but on the cusp.

  • Author
On 2/18/2025 at 6:53 AM, Von said:

Just in case you haven't considered it, you have my cross-grain wood movement tingles going with that upper stretcher going into the side rails and the legs. I think it's OK, but on the cusp.

I don't think I need to worry ... the piece is less than 4" wide, and it's only cross-grain for the last 2" on the side rails.

I could have left it floating by the side rails, but dovetailing into the rails does add a little bit of rigidity.

On 2/18/2025 at 9:53 AM, h3nry said:

I don't think I need to worry ... the piece is less than 4" wide, and it's only cross-grain for the last 2" on the side rails.

I could have left it floating by the side rails, but dovetailing into the rails does add a little bit of rigidity.

Agreed. I overestimated the width from the photo. At <4" the movement should be negligible. 

Great progress and I envy that it’s mostly hand tool work! 

  • Author
  • Popular Post

More mortices ...

IMG_20250219_095227563.thumb.jpg.69a49dff32028d0f5b05e1deec03b155.jpg

more tenons ...

IMG_20250219_180642411.thumb.jpg.59e55a7acb410cd1e3b990da18a12d97.jpg

and despite a few problems lingering in the design ... it all seems to hold together without glue or clamps!

IMG_20250220_120337112.thumb.jpg.284bbb2b804886e9cf18289fd89db49e.jpg

I still need to add the dividers for the top drawers, and some drawer runners.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.