Popular Post Coop Posted August 11, 2025 Popular Post Report Posted August 11, 2025 Getting rid of some useless stuff has allowed me space for a much needed sandpaper storage cabinet/shelves. If some of you get a chance, please post pics of how you store your paper, sheets and disc. Thanks in advance. 5 Quote
Popular Post Chet Posted August 11, 2025 Popular Post Report Posted August 11, 2025 I use the disc paper more so it is mounted to the side of the cabinet that the drum sander sits on. it is just on a French cleat. My sanding blocks are in the top drawer of the same cabinet and my boxes of sheets are in the bottom drawer with the spare roll for the drum sander. 5 Quote
Popular Post Von Posted August 12, 2025 Popular Post Report Posted August 12, 2025 On 8/11/2025 at 5:42 PM, Coop said: Getting rid of some useless stuff has allowed me space for a much needed sandpaper storage cabinet/shelves. If some of you get a chance, please post pics of how you store your paper, sheets and disc. Thanks in advance. My 5" discs go in these old CD storage racks which are turned 90 degrees and have a shelf added in the middle. They are on french cleats. Full sheets are in this old file tote. And triangles for my detail sander and other odds'n'ends in these bins. 4 Quote
Popular Post fcschoenthal Posted August 12, 2025 Popular Post Report Posted August 12, 2025 I primarily use 5" disks, so I made this box with drawers to hold the various grits. My old Dewalt sanders are on top, as well as my sanding blocks that use the same disks. On the bench below it (I know, it's a mess) I have rolls of the 2¼" for my "Preppin weapon" blocks, plus some other sponge sanding blocks. I have all of my sheet paper stored in a cabinet in the boxes and the sanding belts right next to them. 4 Quote
Mark J Posted August 12, 2025 Report Posted August 12, 2025 For full sheets I use a file tote with hanging files, like Von's. 2 Quote
legenddc Posted August 12, 2025 Report Posted August 12, 2025 My discs are still in the boxes from Klingspor. I don't have this, but I believe someone (@gee-dub?) here uses it for their Preppin Weapon blocks and sandpaper storage. You may want to go measure to confirm it fits. https://www.harborfreight.com/tool-storage-organization/u-s-general-tool-storage/6-compartment-drawer-organizer-99729.html 2 Quote
Popular Post gee-dub Posted August 18, 2025 Popular Post Report Posted August 18, 2025 On 8/12/2025 at 6:33 AM, legenddc said: My discs are still in the boxes from Klingspor. I don't have this, but I believe someone (@gee-dub?) here uses it for their Preppin Weapon blocks and sandpaper storage. You may want to go measure to confirm it fits. https://www.harborfreight.com/tool-storage-organization/u-s-general-tool-storage/6-compartment-drawer-organizer-99729.html Yep, that's me. Fits the Preppin Weapons perfectly. 4 Quote
Popular Post BillyJack Posted August 18, 2025 Popular Post Report Posted August 18, 2025 I didn’t keep as much as most of you as you at the furniture factory.lol 2 1 Quote
Popular Post Tom King Posted August 18, 2025 Popular Post Report Posted August 18, 2025 Mine are kept in watertight, airtight toolboxes in cubbies, mostly for the traveling show and to be easily transported to a jobsite. One for sheets in sleeves with a cutter and Prepping Weapons, one for discs, and one for PSA bodywork various blocks. As much as possible, sanding is done outside with folding white tables for organizing for the job. I had a bunch of belt sanding belts fail from age. I'm trying running some Argon in the toolbox with them. Argon is heavier than air, so maybe it will stay in the box and do some good. 4 Quote
BillyJack Posted August 18, 2025 Report Posted August 18, 2025 What’s with all the direct colored sanding blocks? I think I have one made by Stanley and a wood one I use when making doors.. Quote
Von Posted August 18, 2025 Report Posted August 18, 2025 On 8/18/2025 at 5:34 PM, BillyJack said: What’s with all the direct colored sanding blocks? As I've learned from others on the forum, I keep each loaded up with multiple sheets of a particular grit. When one wears out, I can remove it and keep going. Makes an arduous task just a little easier. 1 Quote
BillyJack Posted August 18, 2025 Report Posted August 18, 2025 I use a ROS for everything and use the black block for sanding in between spray coats. The picture I show has all the flavors including the discs the finish department uses. I kept them since from time to time things had to be rescanned to repay to correct a finish error.. 1 Quote
Tom King Posted August 18, 2025 Report Posted August 18, 2025 Here are some of the things those PSA rolls are for. The PSA sandpaper rolls go up to 3,000 for wet sanding clear coat before buffing. The colored things stay loaded so I can grab whichever one I need for a particular job. I might need one to knock off the little splinters kicked up by a decking screw on a dock to protect bare feet, a different one for redoing some marine varnish on something, or one for body filler on a flat area where I don't need one of the flexible ones. 6" disks stay in the box with the 6" ROS but the 4" ones have their own box since the 4" sanders get used for different things. 4" ROS's that get used on fiberglass are stored separately from the ones used on wood, but they use the same disks. 2 Quote
Popular Post h3nry Posted August 19, 2025 Popular Post Report Posted August 19, 2025 For sheets, I just have a box on the wall behind my turning tools paper stays in original packaging... for turning I use 2" pads, stored in a box with drilled out compartments for each grit up to 3000 5 Quote
Mark J Posted August 20, 2025 Report Posted August 20, 2025 @h3nry, I assume you turn various spindles as components of furniture. Do you turn other things? What do you use the 3000 grit on? Quote
Popular Post h3nry Posted August 20, 2025 Popular Post Report Posted August 20, 2025 On 8/20/2025 at 6:47 AM, Mark J said: @h3nry, I assume you turn various spindles as components of furniture. Do you turn other things? What do you use the 3000 grit on? My lathe is very small ... so I just turn small things ... pens, handles, ornaments, and bowls up to 8" diameter etc. I haven't really experimented with highly polished finishes that need crazy high grits. I'd never sand a spindle to 3000, but small decorative objects do seem to need a higher polish than furniture. 3 Quote
Popular Post Coop Posted August 20, 2025 Author Popular Post Report Posted August 20, 2025 We’ve had a plastic file holder like @Von posted for years and I always wondered why we kept it as it never got used. I combed the house over several times looking for it and I guess, at some point, someone decided we no longer needed it. I went to Walmart and Office Depot and neither had one. So, I brought out some scrap 1/2” and 1/4” ply and decided to build one. After an hour or two in the shop at the ts, my wife brought out a couple of beverages and I called it a day. We were talking and I told her of my delima and she asked did I check Amazon and I was like, duh! Sure enough, I could have saved my ply and bought one for less than $30. Oh well, two down and one to go. 5 Quote
Popular Post Ron Swanson Jr. Posted August 21, 2025 Popular Post Report Posted August 21, 2025 On 8/20/2025 at 6:07 PM, Coop said: We’ve had a plastic file holder like @Von posted for years and I always wondered why we kept it as it never got used. I combed the house over several times looking for it and I guess, at some point, someone decided we no longer needed it. I went to Walmart and Office Depot and neither had one. So, I brought out some scrap 1/2” and 1/4” ply and decided to build one. After an hour or two in the shop at the ts, my wife brought out a couple of beverages and I called it a day. We were talking and I told her of my delima and she asked did I check Amazon and I was like, duh! Sure enough, I could have saved my ply and bought one for less than $30. Oh well, two down and one to go. Well sure, but where's the fun in that? Looks good!! 3 Quote
Popular Post JohnG Posted August 21, 2025 Popular Post Report Posted August 21, 2025 I use a 2-drawer file cabinet. Full sheets and cut sheets go in hanging folders with grit number on tabs in the top drawer. Sanding blocks, steel wool, non-woven pads, and other sanding accessories go in the bottom drawer. Discs for my ROS are kept in the 50ct boxes near where my ROS lives. I have one of those sandpaper cutters stuck to the drawer front with a couple magnets. 4 Quote
Popular Post Mark J Posted August 21, 2025 Popular Post Report Posted August 21, 2025 13 hours ago, Coop said: I could have saved my ply and bought one for less than $30. Yours are much better! 4 Quote
BillyJack Posted August 21, 2025 Report Posted August 21, 2025 On 8/21/2025 at 7:53 AM, Mark J said: Yours are much better! lol… Quote
Popular Post legenddc Posted August 23 Popular Post Report Posted August 23 Marc posted some 3D print files for Backside Sandpaper and Preppin' Weapon sanding blocks (with extra sandpaper) recently. https://www.thingiverse.com/thewoodwhisperer/designs 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.