Popular Post fcschoenthal Posted July 28 Popular Post Report Posted July 28 I got an email this morning from Harvey Tools about their new Sniper SD-20 drill press. It's an AI integrated drill press that can move the spindle ½" on the X or Y axis to center on a mark you've made on the wood. Also includes auto hand sensing that stops the bit if it detects your hand in "the zone". There's several voice activated features too. The electronic raise/lower the table is nice though. All this for only $6800. 1 3 Quote
Popular Post Ron Swanson Jr. Posted July 28 Popular Post Report Posted July 28 Sure, but this takes all the fun away from needing to hit your mark exactly and then missing it it by 1/32". Pass. 3 Quote
Von Posted July 28 Report Posted July 28 Interesting to think about tools that use a camera to give SawStop-like protection based on what they see. I could imagine being able to set a configurable zone: if my hands get within, say, 3" of the blade, power the machine off. Since it's visual and not based on contact, powering off the machine could work instead of the whole SawStop cartridge system. Coincidentally, I saw Andy Rawls' video yesterday in which he describes injuring himself with his drill press last week (with graphic images). 1 Quote
Mark J Posted July 28 Report Posted July 28 The camera idea is very interesting. I would have thought it would be hard to injure yourself with a drill press, but come to think of it, I usually have the workpiece clamped down. Quote
Von Posted July 28 Report Posted July 28 1 hour ago, Mark J said: I would have thought it would be hard to injure yourself with a drill press, but come to think of it, I usually have the workpiece clamped down. It wasn't the workpiece, the issue was his wedding ring and his warning message is not to wear one. That's as far as I'll describe the injury. Quote
Beechwood Chip Posted July 28 Report Posted July 28 On 7/28/2026 at 11:49 AM, Von said: the issue was his wedding ring I've started removing my ring when I put on my PPE. It's hard to imagine that something so small and close to the skin could get caught on something, but after hearing about "de-gloving" accidents I decided to add a step to my routine. I think that several woodworking educators (Marc?) wear silicone wedding bands for safety. 2 Quote
Popular Post Mark J Posted July 28 Popular Post Report Posted July 28 I used to remove my wedding ring, then one day I stopped putting it back on and just put it on a Keychain. 3 Quote
pkinneb Posted July 28 Report Posted July 28 The one tool that I have had for nearly 35 years is my Delta DP, I have thought about replacing it since everything else has been replaced but its till does what I need so...while I have no issues with new tech $6,800 for a DP? seriously??? That's nuts. Sorry if I have offended any purchasers 2 Quote
Chet Posted July 28 Report Posted July 28 On 7/28/2026 at 10:14 AM, pkinneb said: $6,800 for a DP? seriously??? Yeah, No Thanks! Quote
wtnhighlander Posted July 29 Report Posted July 29 All I want my drill press to do is make holes. So-called "smart" machines are ONLY as safe as what the designers can foresee and account for. Foolishness always find a way. Prop65 warnings exist because, under some set of circumstances, every element in the universe can kill you. Doesn't mean the warnings actually help anyone. 1 Quote
Popular Post fcschoenthal Posted July 29 Author Popular Post Report Posted July 29 On 7/28/2026 at 12:14 PM, pkinneb said: The one tool that I have had for nearly 35 years is my Delta DP, I have thought about replacing it since everything else has been replaced but its till does what I need to I had a Delta benchtop for around 30 years and it still ran without any runout. The only reason I replaced it was a guy basically giving away an old Craftsman 17" floor model for $20. I wanted more swing and throw, so I snapped it up and polished all of the rust off. It'll probably last another 30 years. 3 Quote
Chestnut Posted July 29 Report Posted July 29 Wow, that's both cool and insane. I have a feeling we aren't the intended market for that. Or maybe we are? That DP wouldn't work for me, it'd probably never stay on as the read zone seems to be where my hand always is. Quote
legenddc Posted July 29 Report Posted July 29 On 7/28/2026 at 12:00 PM, Beechwood Chip said: I've started removing my ring when I put on my PPE. It's hard to imagine that something so small and close to the skin could get caught on something, but after hearing about "de-gloving" accidents I decided to add a step to my routine. I think that several woodworking educators (Marc?) wear silicone wedding bands for safety. I used to take off my wedding ring (when I remembered) when I went into my shop. I stopped wearing it completely during Covid. My ring always seemed too loose in the winter and too tight in the summer, had to be removed when using tools, playing sports, etc. Now I just wear a silicon wedding ring. The only time I take it off is when I'm making pizza dough. I haven't had one rip yet. 2 Quote
Von Posted July 29 Report Posted July 29 I've never gotten comfortable with a wedding ring on my finger. It seems to need to be so large to get over my knuckle that it seems loose on my finger and feels like it interferes with my fingers closing together. After I lost my first one (it fell off when I was walking/wrangling the dog), I've worn its replacement on a chain on my watch fob that I wear on my belt. 2 Quote
Dave H Posted July 29 Report Posted July 29 The more bells and whistles the more things to replace, I like simplicity one of these days You won't even need an old broke down retired carpenter at all... Quote
Immortan D Posted July 29 Report Posted July 29 I stopped watching most YouTube woodworking channels once they started bringing a CNC into every project. That's just not something I'm interested in. 2 Quote
fcschoenthal Posted July 29 Author Report Posted July 29 On 7/28/2026 at 8:14 AM, Ron Swanson Jr. said: Sure, but this takes all the fun away from needing to hit your mark exactly and then missing it it by 1/32". If it has a camera to zero in on the spot marked, I wonder if you have to make a special mark? Kind of like the old test cards where you had to make sure all of the bubble was filled in for it to read right. On 7/29/2026 at 12:55 PM, Dave H said: The more bells and whistles the more things to replace, That's if you could replace them. What happens when something breaks out of the warranty period, or they stop supporting the software on it? I stopped working on my own cars a long time ago because of this. Almost more electronics than metal these days, and that's not even with an EV. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.