Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sculpted Rocker

Featured Replies

So, finally home and get a chance to get going on this project.

 

This project will not be going at my normal pace as I get to work on it with my dad.  Ultimately, the chair is intended for use with his great grandbaby so, should be a pretty cool experience.  Baby isn't expected yet (and I hope they wait a good long while) but, we're going to get a good jump on the game.

 

I showed all the templates and stuff in the guild section so, no need to show it again here.  We'll just start with the rough lumber that was ordered from Bell Forest.

 

Here we go!

  • Replies 294
  • Views 32.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • At it early this morning again.  Took me about 3 hours to get the leg to rocker fit just right.  Lots of trial and error but, it came about pretty good.  Patience is a virtue!  Especially for the wife

  • I've been to Edensaw, amazing selection for sure.  If I were to start over again, I would source the material locally. Another day of sculpting, rasping, scraping, and sanding and it's pretty much t

  • Boy's still at work so, time for little power carving!  

Looking forward to following this.  That is a nice stack of lumber, hopefully you took advantage of the free shipping!  

Really looking forward to this build. Like many folks on the forum, it's on my shallow bucket list. Honey do list for the new house has to be whittled down first - Chest of drawers, bookcase(s), kitchen cabs, pantry, closet built-ins... Did I say shallow?

Awesome!!! I've been waiting for this! I bought all the patterns as well. Just gotta get that chest of drawers done then its on to this! I will be watching closely!

  • Author

Looking forward to following this.  That is a nice stack of lumber, hopefully you took advantage of the free shipping!  

Unfortunately, no.  I actually bought the lumber a couple months ago and it's just been sitting like that in my shop.

  • Author

Get to chopping some wood! :)

Started a desk project today..  Will probably get back to the Chair on Wednesday or Thursday when my dad is available.

I'll run a separate journal for the desk.

  • Author

Roughed out the parts.  There were a couple of boards that were cupped to the point they may not be useable.  Fortunately, I have a bunch of 8/4 on hand and access to much more.  Color match could be the only difficult part.

 

Roughed out the parts.  There were a couple of boards that were cupped to the point they may not be useable.  Fortunately, I have a bunch of 8/4 on hand and access to much more.  Color match could be the only difficult part.

 

BpjHQG.jpg

Looking good Kev! Youre shop looks pretty amazing. Have you ever posted pics of the shop or a shop tour video? I love seeing into other peoples shops. Also, is that a trion or carvex you are using? Do you like it?
  • Author

It's the Trion..  It's ok..  Could certainly do the same thing with a cheaper jig saw.

I think I have a shop tour in the shop section of the forums..  There's been a few additions since the last tour.  Maybe I'll update it once these projects are finished up.

It's the Trion..  It's ok..  Could certainly do the same thing with a cheaper jig saw.

I think I have a shop tour in the shop section of the forums..  There's been a few additions since the last tour.  Maybe I'll update it once these projects are finished up.

Awesome i will look for it!
  • Author

Seat material milled, cut, beveled, and dominos cut. Dry fit.  That's enough for one day..  Back to the other projects for a bit..

 

  • Author

Pretty much the same stuff as Marc.

Did you blade tilt to do the coopering or use the jointer?  I'm planning to try my coopering skills on a little bench before I do a rocker seat

  • Author

Did you blade tilt to do the coopering or use the jointer?  I'm planning to try my coopering skills on a little bench before I do a rocker seat

I tilted the TS blade and then ran it across the jointer

Really not too difficult.

 

Edited by TIODS

  • Author

Was pretty clean coming off the saw so, didn't use the jointer fence.  I think Marc did it the same way.  

Came out super clean, no gaps.

Edited by TIODS

Kev, I see no burn marks from the ts what so ever. However, there may be some from ripping that are not shown. Do you attribute that to your blade, saw, or both? What blade do you use?

  • Author

It's a woodworker 2..  No burning issues at all.

Kev, I see no burn marks from the ts what so ever. However, there may be some from ripping that are not shown. Do you attribute that to your blade, saw, or both? What blade do you use?

Ive seen burn marks come off saws with really good blades. I think the fence to blade alignment and feed rate play a bigger role than the blade itself. 

  • Author

It certainly plays a part in it!  

I've been super happy with the saw, fence, and blade combination.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.