Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What kind of biscuit jointer

Featured Replies

I am thinking about buying a used biscuit jointer and was wondering what people would suggest?

Thanks

I have had a Porter Cable model for over 20 years and still hums along.  At the time I bought mine the real heavy hitter was Lemello (I think that is how it's spelled) It was just out of my budget at the time.

If u can afford a lamello, you might as well get a domino.

Otherwise, pc seems to be the best biscuit joiner commonly available.

I found a used PC in my area for $100ish, works great.  If it weren't 10x the cost of what I needed, I'd consider a domino as well. But you know, one thing at a time. 

I had a porter cable for years, it was great. I gave it away since i bought a domino.

Sent from my SM-N910W8 using Tapatalk

I got the PC I bought from another forum member used. It works fine. 

Every darn time I here domino it makes me sick...I have the Porter Cable for years its been ok for now..

Every darn time I here domino it makes me sick...I have the Porter Cable for years its been ok for now..

Wow. Now that's what I call a hater! Try this on for size, DOMINO DOMINO DOMINO DOMINO!!

You barfing yet? [emoji1]

Sent from my SM-N910W8 using Tapatalk

 I want one one..:)...I here they are great you no...I think a domino would help me make make money..

I have a Makita and it does what it's supposed to do when I use it...which isn't often.

We should ask you before we go further...what's your intended use for the biscuit joiner?

55 minutes ago, Eric. said:

I have a Makita and it does what it's supposed to do when I use it...which isn't often.

We should ask you before we go further...what's your intended use for the biscuit joiner?

I'm voting for he will make his Roubo joints with it.

I've got an old direct drive Lamello, their lowest cost model at the time. It's not very powerful & won't tolerate a dull blade, but otherwise is a very good machine. Quiet, smooth, no slop or play anywhere. I don't use it much, but I wouldn't consider getting rid of ti.

if it is just a one-off project get a slot cutting bit for your router

  • Author

I plan to use it for table tops, Eventually I would like to build a roubo as well.

I have owned a biscuit jointer for 15 years and it served me well. It was a cheap Ozito. Here is the thing with them. All they are is a small angle grinder with a blade that cuts timber and they have a gadget at the cutting end that guides the plunge and angle. We all know this...but, beware of the cheap ones that the angle guide has movement in even after you have clamped it tight.

These days I use the domino mostly because I can do things with it that the biscuit jointer can't. 

20121202_160349.jpg

I have a dewalt and it's ok for what little use it's seen..  Yes, I have a couple dominos..

If you were closer, I'd give it to you..  Heading out on the road again tho so, shipping it would be out..

I have a ryobi and it works fine. If I wanted to spruce it up I would buy an aftermarket blade for it.

I have a couple of used Lamello Top 10 biscut joiners. One has the original wood box. I would sell them for around 1/2 what a new one goes for.

  • Author

Thanks for the suggestions. I have my eye on a few PC on eBay.

19 hours ago, wdwerker said:

I have a couple of used Lamello Top 10 biscut joiners. One has the original wood box. I would sell them for around 1/2 what a new one goes for.

Thanks for the offer! A little more money than I want to spend.

The Lamello is made so much better than the PC though.

I have a Dewalt that I bought in the mid '90s.  I think it's probably been that long since it's been used, but it did work just fine.  It's a pretty simple tool.

Before I bought my Domino I was planning on getting a used Lamello Top 10... Not sure what Steve is asking for his but it would seem to be a good deal if you can swing it...

I paid $700 20 years ago. Now the Top 21 is the newest model for $1195. Top 10 model is $599 so I think $299 is a fair price.

  • Author
On 1/10/2016 at 8:37 PM, wdwerker said:

 

I appreciate the offer but I can't justify spending that much money on a biscuit jointer. Maybe I will wait to buy something until I can find a good deal on a domino.

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.