Popular Post shaneymack Posted April 22, 2016 Popular Post Report Posted April 22, 2016 So last time I was in the shop working on the tool chest (I think it was tuesday) the wife comes into the shop and asks me to make a 24" x 36" picture frame for our youngest childs first bday this Saturday. I was like nooooo way josé. Not enough time and i need the backer board and i need to get glass cut, blah, blah blah. I don't do well with stopping one project to do another one. When I was doing the maloof rocker I had to stop amd make the kids a dress up station. Well this time I put my foot down ! Not a chance woman !! For all you married guys out there you know how this turned out. Angry wife, terrible life. Needless to say, tonight after dinner i got to work on the frame I found an old lonely cherry board up on the shelf that was a leftover from a silverware chest i did about 10 years ago for a friends mom. I wanted continuos grain so it needed to be about 12 feet long. I brought it down and marked out my pieces Rough cut Milled them up and put them back in sequence to mark out the pieces and label each corner I bought an acid free backer board and a piece of glass today on my way home from work. I cut the backer board just a smidge smaller than the glass Placed my pieces down as they will be in the frame and marked the edge that will be rabbetted with a sharpie to be sure I don't screw up I marked on the end grain the size of the groove i need to set my blade height and fence. 1/4" x 1/2" I ran the boards twice with the standard blade to remove the waste instead of switching to the dado blade. Put a chamfering bit on the router table and made a chamfer on the outside corner and a smaller one on the inside corner. Next i cut all the miters at the chop saw. I dialed them all in to sweet perfection on the mitre shooting board. Nothing beats that- not even the kapex. Ya i said it. Tight joint Next i dominoed all the corners with some 6x40's Put the dominos in amd tested the fit Removed all the machine marks with the smoother. Sweet glass finish ! Glue up Square as square can be This is the first time im trying Lee Valleys brand of glue. It has a decent open time up to twenty minutes. Its much more liquid than titebond 2. I like it. We will see how it holds up ! Little clean up tomorrow and a couple coats of finish and i will mount the poster that my wife made for our son. Bed time ! Sent from my SM-N910W8 using Tapatalk 3 Quote
Tpt life Posted April 22, 2016 Report Posted April 22, 2016 Still trying to put more of yourself into a project than is wise I see... Nice progress! 1 Quote
..Kev Posted April 22, 2016 Report Posted April 22, 2016 Great progress! Is that Cherry rubbing off or are you bleeding again? Also, I thought your blood was green! 1 Quote
Llama Posted April 22, 2016 Report Posted April 22, 2016 Shouldn't you be using millimeters? Nice work! I bought a limited edition art thing a couple of years ago, and it's still in the damn tube. 2 Quote
Popular Post Chet Posted April 22, 2016 Popular Post Report Posted April 22, 2016 22 hours ago, TIODS said: are you bleeding again? I think Shane maybe tried to slit his wrist so he wouldn't have to do this project for his wife. 4 Quote
..Kev Posted April 22, 2016 Report Posted April 22, 2016 1 minute ago, Chet K. said: I think Shane maybe tried to slit his wrist so he would have to do this project for his wife. Or try the new glue on a project requested by the wife.. 1 Quote
shaneymack Posted April 22, 2016 Author Report Posted April 22, 2016 Hahah ! You guys are crazy ! Yes i cut myself when i was up on the ladder trying to get the bottom board out of the pile. Pulling and tugging and cussing and then i noticed blood everywhere. Cut it pretty bad. Finally got the bleeding to stop but when i used my hand as a dead blow for squaring up the frame during glue up i noticed the blood squirting out onto my project. Every good project needs blood. Quote
Woodenskye Posted April 22, 2016 Report Posted April 22, 2016 Looks good Shane. With that much blood spilled on this rush project, the wife owes you big time! 1 Quote
RichardA Posted April 22, 2016 Report Posted April 22, 2016 With all that DNA on the frame, there's no need to sign and date it! 2 Quote
wtnhighlander Posted April 22, 2016 Report Posted April 22, 2016 So, that's really maple, but looks like cherry because of all the blood? ? Nice work aa usual, Shane! 1 Quote
Eric. Posted April 22, 2016 Report Posted April 22, 2016 You got some long ass fingers yo. I bet you're one hell of a booger picker. 2 Quote
shaneymack Posted April 22, 2016 Author Report Posted April 22, 2016 You got some long ass fingers yo. I bet you're one hell of a booger picker. At 6' 3" everything is long on me. And yes, I can pick one helluva booger!! Sent from my SM-N910W8 using Tapatalk Quote
treeslayer Posted April 22, 2016 Report Posted April 22, 2016 nice work shane, and you know what they say "if you ain't bleedin' you ain't trying'" 1 Quote
Mick S Posted April 22, 2016 Report Posted April 22, 2016 9 hours ago, shaneymack said: Every good project needs blood. It's my most frequently used stain... Works really well for tinting sapwood on cherry. 2 Quote
wtnhighlander Posted April 22, 2016 Report Posted April 22, 2016 18 minutes ago, shaneymack said: At 6' 3" everything is long on me.... There are soooooo many ways that statement can go wrong.... Quote
shaneymack Posted April 22, 2016 Author Report Posted April 22, 2016 At 6' 3" everything is long on me.... There are soooooo many ways that statement can go wrong.... I speak the truth Ross. Nothing but the truth... Sent from my SM-N910W8 using Tapatalk 1 Quote
..Kev Posted April 22, 2016 Report Posted April 22, 2016 6 minutes ago, shaneymack said: I speak the truth Ross. Nothing but the truth... Sent from my SM-N910W8 using Tapatalk I would assume that would mean your stories and tales too 2 Quote
shaneymack Posted April 22, 2016 Author Report Posted April 22, 2016 I speak the truth Ross. Nothing but the truth... Sent from my SM-N910W8 using Tapatalk I would assume that would mean your stories and tales too Hah! You know me well Kev ! Sent from my SM-N910W8 using Tapatalk 2 Quote
Llama Posted April 22, 2016 Report Posted April 22, 2016 45 minutes ago, TIODS said: I would assume that would mean your stories and tail too Ficksed!!! 1 Quote
bleedinblue Posted April 22, 2016 Report Posted April 22, 2016 There you go Eric, you don't need a branding iron. You need a rubber stamp and some bodily fluids. It'll be the next big thing. 1 Quote
bob493 Posted April 23, 2016 Report Posted April 23, 2016 20 hours ago, shaneymack said: At 6' 3" everything is long on me. And yes, I can pick one helluva booger!! Sent from my SM-N910W8 using Tapatalk I dont even... 1 Quote
AceHoleInOne Posted April 23, 2016 Report Posted April 23, 2016 22 hours ago, bleedinblue said: There you go Eric, you don't need a branding iron. You need a rubber stamp and some bodily fluids. It'll be the next big thing. I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet? -Ace- Quote
Eric. Posted April 23, 2016 Report Posted April 23, 2016 3 minutes ago, AceHoleInOne said: I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet? -Ace- I see what you did there. Very funny. I put the logo in the hands of two graphic designer buddies of mine. They are good at what they do and I expect one of them will churn out something pleasing to my eye. Whether or not they complete the mission during this decade is the bigger question. Quote
shaneymack Posted April 23, 2016 Author Report Posted April 23, 2016 I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet? -Ace- I see what you did there. Very funny. I put the logo in the hands of two graphic designer buddies of mine. They are good at what they do and I expect one of them will churn out something pleasing to my eye. Whether or not they complete the mission during this decade is the bigger question. Porbably right around the same time the basement is finished Sent from my SM-N910W8 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.