Recommended Posts

Posted

Boss let me back in the shop for a bit so, got the other drawers built..  Was a set of glides short..  I'll pick them up this weekend.

PBk0YO.jpg

4 hours ago, K Cooper said:

I can see this piece being copied, at least once in Houston! Good idea too about the band saw blade storage! 

Let me know if you need anything from it Coop..  Happy to help!

Posted

Thanks Kev! I like every part of it. I brought my utility trailer home from work today and plan on going down tomorrow and getting some bb ply. I may have to float it home though. Looks like you made the entire build from 3/4", drawers and all?

Posted
5 minutes ago, K Cooper said:

Thanks Kev! I like every part of it. I brought my utility trailer home from work today and plan on going down tomorrow and getting some bb ply. I may have to float it home though. Looks like you made the entire build from 3/4", drawers and all?

Yep..  Drawer bottoms are 1/4 except for the drawer bottom that holds the tenon jig, I did that in 3/4.  I'll add some maple trim and probably walnut drawer fronts to it to dress it up as the scrap material is available but, it's shop furniture.  I was't concerned with screws showing or that it's obviously plywood.

Posted

I agree. Functionality, availability and common sense sometimes have to come into play. I mean, I'm going to copy this down to the tenoning jig drawer, as mine is on a top shelf now, that requires a ladder to access. The only difference , mine will be on casters. Thanks again for the influence!

  • Like 1
Posted
Just now, bleedinblue said:

Man, you built this thing in like what, an hour?  You work fast!

Not quite that fast..  Probably about 10 hours in it total..  Just seems fast on here.

Posted

You guys make drawers in cabinets look so easy, I really hope it is since I gotta work on some of that coming up. Congrats on the new drum sander!

  • Like 1
Posted
5 minutes ago, Cliff said:

You guys make drawers in cabinets look so easy, I really hope it is since I gotta work on some of that coming up. Congrats on the new drum sander!

Nothing fancy about those drawers at all!  Butt joints, glue, and screws..  It's shop furniture!

The important part to using those glides is that you have to be pretty spot on with the width of the drawer..  There's just no a lot of tolerance for error.  Too wide and they just flat won't work.  Too narrow and you'll have to shim the glide to get it to work well with the drawer.

I install the glides before I build the drawer.  From there, I cut the front and back of the drawers so that they fit perfectly (sneaking up on the fit) between the glides.  Then I cut the sides 1 1/2" shorter than the glide and build the drawer.

  • Like 1
Posted
1 minute ago, bleedinblue said:

Getting that right size is the intimidating part I think.  I've pretty well avoided projects with drawers, but not because of the joinery.  I need to change that someday.

No reason to be intimidated.  Like I said above, if you install the glides in the cabinet first, it's easy to sneak up on that fit.  Even if you're doing dovetails, cutting the front and rear board are cut to that perfect size.  

  • Like 1
Posted
41 minutes ago, TIODS said:

Butt joints, glue, and screws..  

And you didn't use a pseudonym in this build. Your reputation is at stake!

  • Like 2
Posted
49 minutes ago, TIODS said:

Butt joints, glue, and screws

No pseudonym required, like Kev said a couple of times it shop furniture.  Shop furniture can be therapeutic, you can get all those I want to use screw/brad nail/pin nail/staples feelings out of your system for a while.;)

  • Like 1
Posted

Graduation festivities over!  Back in the shop today..

Got the old sander moved to its new shop.  Finished the drawers in the new stand and moved it into place.  Pretty heavy!

cV2uCw.jpg

Then, I started making drawer fronts.  Used up the walnut scrap that I had and will actually have to pick up a little more tomorrow for 2 of the drawers..

Wrc78l.jpg

Currently, no drum sander so, these will just be sanded with a ROS, some finish slapped on and installed.

Still undecided on handles.  All of the other handles in the shop are hand made so, I may fire up the router table and make another batch for this..

  • Like 2
Posted
I can see this piece being copied, at least once in Houston! Good idea too about the band saw blade storage! 

Ditto that. There will be another copy in Charlotte!

Sent from my iPhone using Tapatalk

  • Like 1
Posted

I thought it was going to be positioned so that you had the recessed area to the left of the small drawers for band saw blade storage - change in plans?

Posted
5 minutes ago, Chet K. said:

I thought it was going to be positioned so that you had the recessed area to the left of the small drawers for band saw blade storage - change in plans?

Nope, they're back there and tucked in nicely.  Once the actual machine is here, I'll see how far I can pull it away from the wall.  Worst case is that I have to pull it each time I need a blade which wouldn't be the end of the earth.

I used some coat hooks in that cavity to hang the blades. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined