Recommended Posts

Posted

Congrats on the new saw. I have a 14BX (very similar) and i agree the saw is awesome. Make sure to take the time getting used to the ceramic guide set up. All of my very minor cut issues have involved me bumping them or the guides not being tightened enough.

What are you using for blades? I have a 115" Resaw king and a Timberwolf 3tpi 1/2". The timberwolf works very well for $30.

Posted

Congrats on the awesome saw!

+1 on checking the ceramic guides - twice I've had the lower one loosen up.  Maybe I need to crank on it more when I tighten - just hard to get leverage under there...

Posted

Yep good call on that guide. I had lowered it all the way down in order to tilt the table forward. The resting bolt was about three turns away from being square to the blade.

For blades I just bought the 110" Resaw King and that's the only one for now. I only plan on resawing, rough ripping and very shallow curves on this one. I have a smaller craftsman with an 1/8th inch blade for small stuff. Can't wait to start buying 6/4 and getting two boards from it haha

Sent from my iPhone using Tapatalk

Posted

Nice saw! I sure with I'd have got one of those instead of a Rikon 10-325.

You know that saying about the high price being forgotten but the low quality is with you forever, or something like that...

  • Like 1
Posted

No rumors.  All makers have one get past QC now and again.  If the random issue set the reputation I wouldn't be comfortable buying anything :D:D:D .  One of the values of the forums certainly is getting the actual user's experience from those that share it.  When shopping I try to factor in as much as I can, weigh the source and make my decision.

Posted
1 hour ago, davestanton said:

I am told that this saw is a very good Laguna and some of the other Laguna's have some issues. Anyone else heard these rumors? 

I bought a Laguna a few months ago and at that time did extensive research through forums. It didn't appear that Laguna had any issues of reoccurring lemons. I read about maybe 1 or 2 issues with unbalanced wheels or something but the poster said it was solved by Laguna promptly.

Posted

I am told that this saw is a very good Laguna and some of the other Laguna's have some issues. Anyone else heard these rumors? 

I dont think they are rumors. Laguna has let a lot of crap slip past QC. Lots and lots of stories out there about this. I think it seems to be getting better though. The 1412 seems to be a great machine that people are generally happy with. There also needs to be a distinction made between Laguna tools from Italy and the ones from China. There is a HUGE difference. I would never buy a Laguna machine from china sight unseen. I received a Chinese machine from them that looked like it was beat up with a baseball bat and the packaging was flawless. I now own an Italian Laguna that im very pleased with. I bought a second smaller Laguna made in China (1412) and made the dealer assembly it. I inspected here and plugged it in and tried it before he left. Without being able to do that i would never have purchased it. My experience with the first machine from them left a real bad taste in my mouth. There has been others that have posted on here with similar stories of receiving banged up machines. All this said, they did provide me with great service. I just think they have some real QC issues.

Sent from my SM-N910W8 using Tapatalk

Posted

So far in my limited experience with it, it is an amazing saw.  The only issue I have noticed is there is a little vibration from the machine.  Absolutely nothing major about this, or anything that I notice affects its job.  I have seen a few articles and videos that changing the tires fixes this.  I also do not have the mobility kit and it is sitting on the garage floor with the rubber feet provided.  I did find a spot in the garage where it where I didn't need to shim the feet.  The only complaint that I have is that the instruction manual is basically garbage with the pictures being bad at best.  Luckily the assembly was fairly straight forward.  Also none of the allen keys were included and of course the three different sizes I needed were the ones missing from my metric set haha.  

Posted
1 hour ago, Jason Hotze said:

.  Also none of the allen keys were included and of course the three different sizes I needed were the ones missing from my metric set haha.  

You are not the only one. I swear that they run off to party with missing socks. Lately, I have been getting an inexpensive set of keys for each machine that needs them, then attaching the keys that fit to the machine with a magnet. The rest of the set goes in a box with others that will hopefully fit the next machine.

 

 

Posted
2 hours ago, Jason Hotze said:

 Also none of the allen keys were included and of course the three different sizes I needed were the ones missing from my metric set haha.  

Hey, that's one thing Rikon got right. All the allen key required are included with a holder that is mounted on the side of the machine. I wish every machine manufacturer would do that. It can't add more than about $2 to the cost.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 66 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined