Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Home for Dovetail Jig

Featured Replies

  • Popular Post

Just a fun project.   Used my new dovetail jig to make itself a home including the Leigh bits, collet and bushings that are used only with the jig.  Cherry and Hackberry.  Dovetailed sides, top and bottom of cabinet and finger joint the accessories box. Have not yet put the ARS on the little box.

P1010001.thumb.JPG.327375f98a10a21cfa6f48330aff3e27.JPGP1010002.thumb.JPG.9b53bff13695602c0161080662ddfe99.JPG

+1 on the matching panels they look great as does the case, i like to have everything for one tool in the same spot helps me keep organized.

Very cool!  I just might have to steal that idea for mine!

Pretty darn cool Ronn. I sure like the hackberry grain. The trim against the panels, is that sort of like glass stop in that it holds the panels in place? Like the way you did that! 

Nice job. Looks great and i like the handle/hold-open situation.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

  • Author
1 hour ago, RichardA said:

I like it, well done and magnets for the doors.

I made a note to myself:  "Always double check the polarity on the magents before gluing them in" or they will push the door open.  Cost me an extra trip to Home depot "cause I actually got all 4 of them wrong.  Odds are that I could get 2 out fo 4 right  but, Noooooo!

3 hours ago, K Cooper said:

Pretty darn cool Ronn. I sure like the hackberry grain. The trim against the panels, is that sort of like glass stop in that it holds the panels in place? Like the way you did that! 

Thank you.  That detail is courtesy of a Freud router bit set for panel doors. 

  • Author
8 hours ago, wtnhighlander said:

Ronn, magnet polarity has bitten me before, too. I switched to using one magnet mated with one steel plate (or washer) whenever possible.

Good idea.  Thanks.

Very nice Ronn. I like the fact the doors slide out of the way. Cool. 

Very cool cabinet Ronn.  That some great work.  

When I am doing projects with magnets, I take two that are stuck together properly, then, while they are alined I scuff up the ends that will go down in the epoxy, that way when I go to set them in the epoxy I look for the side that is scuffed and put that side down.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.