Hector Posted August 3, 2017 Report Posted August 3, 2017 Hi everyone, I'm new to this site. Quick question, Has anyone heard or own a powermatic 26 LPC inline shaper/router? i found one for sale and made an offer on it, but i can't find any more info about this machine. any comments would help. Thanks. Hector, Quote
Llama Posted August 3, 2017 Report Posted August 3, 2017 Just now, Hector said: what does that mean? I thought someone else would jump in by now... Anytime someone mentioned shapers, a guy used to pop in here... Then, one day he sadly stopped popping in. His handle was particleboard... Quote
Chet Posted August 3, 2017 Report Posted August 3, 2017 Yea, its too bad. particleboard would have been all the help you needed, not only did he use a shaper but he was a Powermatic guy too. Quote
thatCharlieDude Posted August 3, 2017 Report Posted August 3, 2017 Will this help? http://vintagemachinery.org/pubs/detail.aspx?id=4314 Quote
Hector Posted August 3, 2017 Author Report Posted August 3, 2017 Not really, I'm talking about this machine. Quote
wdwerker Posted August 3, 2017 Report Posted August 3, 2017 Are you looking at the one in Stone Mountian GA ? That's way above my level. Quote
Hector Posted August 3, 2017 Author Report Posted August 3, 2017 yes, they accepted my offer. I'm looking at it on friday. but for some reason i can not find anyone that owns one of any review on this machine. i can't find out if they still make them. Quote
Llama Posted August 3, 2017 Report Posted August 3, 2017 2 minutes ago, Hector said: yes, they accepted my offer. I'm looking at it on friday. but for some reason i can not find anyone that owns one of any review on this machine. i can't find out if they still make them. I've never seen anything like that... Looks like fun. Quote
Hector Posted August 3, 2017 Author Report Posted August 3, 2017 Me either. Really does look fun. i won't know until friday when i look at it. 1 Quote
Woodenskye Posted August 3, 2017 Report Posted August 3, 2017 I would go to sawmill creek or owwm and ask there, I am sure you would get some info, how much, I'm not sure. Quote
Eric. Posted August 3, 2017 Report Posted August 3, 2017 Are you sure the seller is giving you the correct model number? I'd be really surprised it's the right number if you can't find any information on it. Even the most obscure vintage machines will return a few google results. I'd contact the seller to confirm the model number, then contact Powermatic directly for more information about it. 1 Quote
thatCharlieDude Posted August 3, 2017 Report Posted August 3, 2017 This is all I could find online: Quote
minorhero Posted August 3, 2017 Report Posted August 3, 2017 This is an industrial model which is why you can't find anything on it since the folks here and most forums are hobbyists. Biggest issue you will have outside of it's extreme size is likely it will require it's own wiring to make it happen. 1 Quote
drzaius Posted August 3, 2017 Report Posted August 3, 2017 That video brought back a memory. I once wired up an in line shaper that had an oil cooled motor, I think it was 10HP, but was physically quite small. RPM was something around 13,000 & used a motor/generator set to achieve the 240Hz required to run it that fast. This was way before VFDs. Quite a machine. Quote
wdwerker Posted August 3, 2017 Report Posted August 3, 2017 I hope you noted that it needs 3 phase power . Quote
Pwk5017 Posted August 3, 2017 Report Posted August 3, 2017 I dont know if ive ever seen anything like this before--and i frequent the crap out of industrial auctions. After watching the video without sound, what in the hell does this thing do exactly? Do you clamp your workpiece to the table top with the pneumatic clamps and then move the spindle on the carriage? Struggling to understand the role this fills that a normal shaper does not. 1 Quote
Hector Posted August 3, 2017 Author Report Posted August 3, 2017 Yes, i know its a 3 phase, but i have plenty of power. Quote
Ronn W Posted August 4, 2017 Report Posted August 4, 2017 After studying the video, I have determined that it really doesn't do anything. I just sounds impressive andn has falshing lights so you can generate machine envy when you post it online. ....and that's the truth!?! Quote
pkinneb Posted August 4, 2017 Report Posted August 4, 2017 1 hour ago, Ronn W said: After studying the video, I have determined that it really doesn't do anything. I just sounds impressive andn has falshing lights so you can generate machine envy when you post it online. ....and that's the truth!?! LOL I was thinking the same thing Ronn. Quote
Tom King Posted August 5, 2017 Report Posted August 5, 2017 Is that thing for wood, or granite slabs? Quote
Hector Posted August 5, 2017 Author Report Posted August 5, 2017 42 minutes ago, Tom King said: Is that thing for wood, or granite slabs? It's for wood Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.