Denette Posted December 2, 2017 Report Posted December 2, 2017 I just got a brand new Powermatic 701 mortiser. It’s pretty great. But the chisel isn’t square to the table and I don’t have a clue how to square it up. Behold. This square is accurate, and is registering off the table’s clean surface. Does anyone else with this planet or a similar model have any idea of how to fix this to get it square? There are only three fib screws to adjust as far as I know, and I can’t seem to get them to adjust far enough to correct this. Quote
Denette Posted December 2, 2017 Author Report Posted December 2, 2017 Wait. Dang it, Powermatic. The base is cracked and the whole work surface is bent. No wonder the chisel isn’t square, this thing was dropped in shipping. Well crap. Quote
Denette Posted December 2, 2017 Author Report Posted December 2, 2017 And, of course, the people who would answer the phone about the warranty just got off work for the weekend three hours ago. I get to stare at this expensive useless thing for days now before I get to hear if I get a replacement or not. Quote
minorhero Posted December 2, 2017 Report Posted December 2, 2017 UGH!! That sucks! I would expect a replacement not to be much of an issue beyond having to call folks. Even the gold standard can have a lemon/broken item. If you had purchased a green bear it would have worked right away out of the box ;P 1 Quote
Tom King Posted December 2, 2017 Report Posted December 2, 2017 It could have cracked from stress in the cast iron. I guess they don't season them as long as they used to. They used to leave them laying around for a year or so before any machining was done. I've heard all sorts of horror stories about fresh cast iron. I bought a new Woodtek, and the base was not only cracked, but twisted so severly that it pretty obviously wasn't shipping damage. They sent me a replacement base in two days. With all that's going on with yours, I don't think it's simply shipping damage either. 1 1 Quote
Chet Posted December 2, 2017 Report Posted December 2, 2017 Man, that is really ugly. I don't think you should have any problem with replacement. Quote
Mark J Posted December 2, 2017 Report Posted December 2, 2017 I don't think you will have any problem with Powermatic customer service, but I have to commiserate with you. That truly sucks. Quote
Chestnut Posted December 2, 2017 Report Posted December 2, 2017 Ask for a free can of paint as well to touch up an paint issues. Also i had better customer service going though my retail store than powermatic CS. They talk directly to their reps and it seems like the sales rep can do a lot more. Quote
gee-dub Posted December 2, 2017 Report Posted December 2, 2017 12 hours ago, Denette said: And, of course, the people who would answer the phone about the warranty just got off work for the weekend three hours ago. I get to stare at this expensive useless thing for days now before I get to hear if I get a replacement or not. Oh the humanity! This is a bummer and you have my condolences. To have a weekend open and a broken tool . . . UGH! No telltale marks on the box/crate? On large stuff I open it while the guy stands there if there is any indication for concern. On something smaller I wouldn't have and would be right where you are. I'm sure they'll get you a replacement ASAP. Quote
mat60 Posted December 3, 2017 Report Posted December 3, 2017 What a long weekend it must be. Look forward to seeing your new replacement soon. Quote
mat60 Posted December 4, 2017 Report Posted December 4, 2017 On 12/1/2017 at 8:17 PM, Denette said: And, of course, the people who would answer the phone about the warranty just got off work for the weekend three hours ago. I get to stare at this expensive useless thing for days now before I get to hear if I get a replacement or not. All good today I hope. Quote
Popular Post Denette Posted December 4, 2017 Author Popular Post Report Posted December 4, 2017 On 12/2/2017 at 9:13 PM, K Cooper said: I recommend Gold Bond 3 I put Gold Bond on it. Now it's not chafing and smells better, but it's dusty and still cracked. Should I have used the spray instead of the powder? Instructions unclear. 1 minute ago, mat60 said: All good today I hope. Not yet! Time zones and all. Tomorrow I will be giving them a call on my break at work if I haven't gotten an email back by then. 1 2 Quote
Denette Posted December 4, 2017 Author Report Posted December 4, 2017 Well, I called Powermatic today, and waited forever. I only got someone on the line when I started pressing buttons on my phone like a crazy person. They said I'd have to go through Amazon. I've now gone through Amazon and UPS is supposed to pick the thing up from my house tomorrow. I'm sending a message to Amazon to basically tell them to get off their butts and get the replacement delivered pronto. Quote
Chet Posted December 4, 2017 Report Posted December 4, 2017 10 minutes ago, Denette said: They said I'd have to go through Amazon. This is why I go to Acme Tools instead of Amazon for big stuff like this and you still get free shipping. Quote
Denette Posted December 4, 2017 Author Report Posted December 4, 2017 4 minutes ago, Chet said: This is why I go to Acme Tools instead of Amazon for big stuff like this and you still get free shipping. Yeah. Makes sense. I have Amazon Prime and free 2-day shipping, which is awesome until something like this happens. *shrug* Quote
pkinneb Posted December 4, 2017 Report Posted December 4, 2017 12 minutes ago, Denette said: Yeah. Makes sense. I have Amazon Prime and free 2-day shipping, which is awesome until something like this happens. *shrug* I have Amazon prime and they have always been awesome to work with, for me. I also have had great luck with Acme unfortunately because they are located in MN I tend to buy from other out of state vendors like HWW to save on state tax. Quote
Chet Posted December 4, 2017 Report Posted December 4, 2017 25 minutes ago, pkinneb said: I also have had great luck with Acme unfortunately because they are located in MN I tend to buy from other out of state vendors like HWW to save on state tax. Thats to bad, I don't get charge sales tax with Acme. Quote
Chet Posted December 4, 2017 Report Posted December 4, 2017 42 minutes ago, Denette said: I have Amazon Prime and free 2-day shipping, which is awesome until something like this happens. I also have Prime, I just always figured when buying big stuff, deal directly with someone that sells big stuff. Quote
pkinneb Posted December 4, 2017 Report Posted December 4, 2017 Just now, Chet said: Thats to bad, I don't get charge sales tax with Acme. When I first outfitted my shop 12 years ago they were only in ND so many of my stationary tools came from them but earlier this year I ended up buying my SS from HWW because the tax savings was pretty big. It is nice to have an Acme store about 45 minutes from me though Quote
Chet Posted December 4, 2017 Report Posted December 4, 2017 2 minutes ago, pkinneb said: Acme store about 45 minutes from me though Is that a fun place to go visit. Quote
pkinneb Posted December 4, 2017 Report Posted December 4, 2017 2 minutes ago, Chet said: Is that a fun place to go visit. Yes its geared more to contractors than woodworkers but still nice to see all the big tools up close. Quote
Chestnut Posted December 4, 2017 Report Posted December 4, 2017 I've always lived within 10 min drive of acme. Love that place. The tax stinks but their service is unbeatable. Quote
pkinneb Posted December 4, 2017 Report Posted December 4, 2017 4 minutes ago, Chestnut said: I've always lived within 10 min drive of acme. Love that place. The tax stinks but their service is unbeatable. Agreed they brought several tools out and set them up for me PM66, Drum Sander, etc not sure if they still do that or not. Quote
Chestnut Posted December 4, 2017 Report Posted December 4, 2017 5 minutes ago, pkinneb said: Agreed they brought several tools out and set them up for me PM66, Drum Sander, etc not sure if they still do that or not. Well they didn't offer when i bought my PJ882 but i also didn't ask. They did help me load it though the forklift operator was very skeptical about my odds getting it home. Hope the mortiser gets figured out that's just frustrating. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.