Popular Post gee-dub Posted May 24 Popular Post Report Posted May 24 Does this ever get old? Neil; what an amazing and tragic life. 4 Quote
Popular Post Von Posted May 25 Popular Post Report Posted May 25 Turns out my neighbor had some asphaltum he bought to restore a hand plane and was happy to share, so I've made some progress in Japanning my hand plane. I'm following the directions in this video. It took a couple of days for the asphaltum, turpentine and BLO mixture to dissolve. I painted it on this morning and then let that sit for a couple of hours. It still looks a little grainy and I'm hoping that smooths out over the process. The second hand plane you see was for reference so I knew what parts to paint and which to leave unpainted. And now into a toaster oven bought from Restore for this purpose. Lots of heating/cooling cycles I expect will take me several days. It's got a mild smell, more than I would want in my kitchen, but outside its barely noticable. 5 Quote
Popular Post pkinneb Posted May 25 Popular Post Report Posted May 25 Two trailers of bark...I have to say the RT66 road trip was waaaay more fun I did smoke some ribs while I was working as well. 7 Quote
Popular Post gee-dub Posted May 26 Popular Post Report Posted May 26 I have some outdoor furniture that is supposed to be primarily aluminum. At a couple of the weld spots (only 2 out of dozens) I am picking up rust. Obviously there is some iron content in whatever was used to make those two welds. I grab my little bottle of decanted Evap-o-rust and apply some. I come back later and there has been no reaction whatsoever. I'm wondering aloud "does this stuff expire? Is it too old?". I go to check the gallon container . . . It was CRC 3-36 lubricant, not Evap-o-rust. So why wasn't the Evap-o-rust working? Because it was in the other container over the sink you ding-a-ling. Cleaned things up and put on the Evep-o-rust . . . worked fine 7 Quote
Popular Post Von Posted May 26 Popular Post Report Posted May 26 Not an overwhelming success with the Japanning. It's still soft (fingernail markable) and needs another coat. The apperance is grainier than I hoped for. I plan to bake the current first coat some more to try and harden it up before applying a second coat. 6 Quote
legenddc Posted May 27 Report Posted May 27 Up to 9 straight days of rain here. We're still in a drought and down 8-10" of precipitation. The rain and cooler weather kept us from going to a pool over Memorial Day weekend or any barbeques. My wife spent some time organizing things and pulled out the Beavercraft wood carving kit I picked up last year. My daughter saw it and wanted to try it out. She had a good time. I got some time in the shop on Sunday (I think) and I started working on a picture frame for a neighbor. 2 Quote
Beechwood Chip Posted May 27 Report Posted May 27 On 5/27/2026 at 9:31 AM, legenddc said: wood carving kit You or your daughter might like this video. It shows a guy learning chip carving step by step. 2 Quote
Popular Post pkinneb Posted May 28 Popular Post Report Posted May 28 Printed this glue cap puller @fcschoenthal shared with us Cleaned up a couple tools I'm selling ...now I need to mow 6 Quote
fcschoenthal Posted May 28 Report Posted May 28 On 5/28/2026 at 3:53 PM, pkinneb said: Cleaned up a couple tools I'm selling Are you giving up sanding? 1 Quote
Popular Post fcschoenthal Posted May 28 Popular Post Report Posted May 28 Working on the making the rest of the shutters after getting the wife's approval on the prototype. The first thing is to sand down one face of the cedar pickets. I used a ROS on the first one, as it was only 4 boards. Now with 44 more to do, I dug out my old Performex 10-20 drum sander. Boy was that a mistake. I went through 2 sanding belts and ripped up my feed belt on the first 10. I'll send the rest through the planer tomorrow with just a light skim pass. I ordered 2 more feed belts off Amazon for tomorrow delivery, but I'm thinking about selling it off and getting a 16-32 SuperMax. 6 1 Quote
Popular Post gee-dub Posted May 28 Popular Post Report Posted May 28 Got a couple of hours in the shop this morning. Cleaned up and went to pick up the grandkids from school; mom's out picking up organic chicken feed and hay for the horses. We are making spaghetti together for a late lunch and then their dad will pick them up before dinner time. LOML will keep watch while I try to get a little more shop time in on the guest room dresser. 5 Quote
Popular Post Ron Swanson Jr. Posted May 29 Popular Post Report Posted May 29 I saw some tech that is actually a great idea for a change: Low Bridge Overheight Detection I was driving truck in a small town and there was a low bridge. Before you get to the bridge, you passed through two electric eyes set up at the height of the bridge. If your truck is too high to fit, you will break the beam and lights on a sign will flash to warn you that you're about to have a REALLY bad day. It's the same system that reverses your closing garage door if something is underneath it. So simple, so cheap and very effective. I'm stunned that it's 2026 and we're just coming up with this now. 6 Quote
Popular Post Ron Swanson Jr. Posted May 29 Popular Post Report Posted May 29 On 5/28/2026 at 4:22 PM, fcschoenthal said: Working on the making the rest of the shutters after getting the wife's approval on the prototype. The first thing is to sand down one face of the cedar pickets. I used a ROS on the first one, as it was only 4 boards. Now with 44 more to do, I dug out my old Performex 10-20 drum sander. Boy was that a mistake. I went through 2 sanding belts and ripped up my feed belt on the first 10. I'll send the rest through the planer tomorrow with just a light skim pass. I ordered 2 more feed belts off Amazon for tomorrow delivery, but I'm thinking about selling it off and getting a 16-32 SuperMax. Ahh! So the shutters might yield a new tool after all!! 1 4 Quote
Popular Post Beechwood Chip Posted May 29 Popular Post Report Posted May 29 On 5/28/2026 at 9:12 PM, Ron Swanson Jr. said: Low Bridge Overheight Detection 3 1 Quote
Popular Post Ron Swanson Jr. Posted May 29 Popular Post Report Posted May 29 On 5/28/2026 at 8:17 PM, Beechwood Chip said: They call that bridge The Can Opener. I can watch those videos for hours! 3 Quote
Beechwood Chip Posted May 29 Report Posted May 29 On 5/28/2026 at 9:26 PM, Ron Swanson Jr. said: They call that bridge The Can Opener. What gets me are the ones where they detect the overheight truck, turn on the sign, turn the light red, and the truck runs the red light and gets skinned by the bridge. 1 Quote
Popular Post Ron Swanson Jr. Posted May 29 Popular Post Report Posted May 29 On 5/28/2026 at 8:56 PM, Beechwood Chip said: What gets me are the ones where they detect the overheight truck, turn on the sign, turn the light red, and the truck runs the red light and gets skinned by the bridge. Oh yeah. The problem with all those systems is you actually have to READ the signs and know what's going on. So that rules out a pretty good percentage right there. 2 1 Quote
Popular Post wtnhighlander Posted May 29 Popular Post Report Posted May 29 There was once a low (and narrow) railroad bridge in the middle of downtown here. Built before US 45 followed the path of the street it crossed in the 1920s. Repeated re-surfacing gradually closed the gap between asphalt and steel. Low speed limits generally prevented the 'can opener' effect, but I recall seeing several trucks get stuck there, sometimes freeing themselves by deflating the tires. The railroad closed and dismantled the bridge in the 1980s, finally allowing US 45 Business to have 4 lanes through town. 3 Quote
Popular Post gee-dub Posted May 29 Popular Post Report Posted May 29 I remember when truck drivers were the best drivers on the road. How things change. 3 Quote
Von Posted May 29 Report Posted May 29 Being a college town we have a fairly consistent stream of UHauls and the like running into bridges. 1 Quote
Popular Post Tpt life Posted May 29 Popular Post Report Posted May 29 Someone let me drive a 26’ box truck, hauling a car, 1,200 miles. I have lots of big vehicle experience, for someone not licensed that way. I think I was more likely to hit someone with the dollied car, after watching so many of those videos. I wonder that rental stores don’t have a short video of a few of those interactions, along with the cost of repairs on the screen. 3 Quote
Popular Post pkinneb Posted May 29 Popular Post Report Posted May 29 On 5/28/2026 at 4:09 PM, fcschoenthal said: Are you giving up sanding? LOL I wish I decided to replace the Grizzly oscillating sander with the Hammer HS 950, it was on sale last weekend and has some nice features. Primarily just makes things I can do on the Grizzly much faster. Re the disk sander I have only used it maybe 5 times (and that's being generous) in many years so trying to reclaim some shop real estate if I can get a fair price for it. Of course the day I put it up for sale @gee-dub posts a fine example of what one can do with such a sander 4 Quote
Popular Post fcschoenthal Posted May 29 Popular Post Report Posted May 29 On 5/29/2026 at 1:15 PM, pkinneb said: LOL I wish I decided to replace the Grizzly oscillating sander with the Hammer HS 950, it was on sale last weekend and has some nice features. Primarily just makes things I can do on the Grizzly much faster. Re the disk sander I have only used it maybe 5 times (and that's being generous) in many years so trying to reclaim some shop real estate if I can get a fair price for it. Of course the day I put it up for sale @gee-dub posts a fine example of what one can do with such a sander That's a nice sander. You can make the same jig to use on the edge sander. 4 Quote
Popular Post gee-dub Posted May 30 Popular Post Report Posted May 30 I have an old red oak breakfast table that got damaged during a move. Rather than throw it out I broke it down and milled some material that I plan to use for slats in a current dresser project. P.s. Forgot to mention. Picked up some Al Pastor tacos from a local joint for lunch . . . fantastic. 4 Quote
Popular Post Sergio Escudero Posted May 31 Popular Post Report Posted May 31 Quiet day. Playing on the computer in the morning. Coffee at noon at my colleague's restaurant, eating duck confit there. After that, a photo session of the shield posted above, finally finished. What a big beast. If I had Tinder, all my photos would be like this. 3 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.