Popular Post pkinneb Posted June 6 Popular Post Report Posted June 6 Trimming out the facia on the deck. I finished the decking last fall just need to finish this part and a couple of sections of railing and I can cross this one off the list. Oh and just a mini rant...its bad enough I have to take care of her pool (although it does look good today ) but she has the nerve to float around reading a book while I'm sweating my backside off in 88 degree heat to finish the deck...WTH!! 3 4 Quote
Popular Post Ron Swanson Jr. Posted June 7 Popular Post Report Posted June 7 On 6/6/2026 at 5:33 PM, pkinneb said: but she has the nerve to float around reading a book while I'm sweating my backside off in 88 degree heat to finish the deck...WTH!! Wars have been started over less. Much, much less. 1 4 Quote
Popular Post legenddc Posted June 7 Popular Post Report Posted June 7 Managed to survive yesterday. Son had a swim meet. Daughter had 2 plays and a ballet rehearsal in between. I had to set up for the rehearsal and missed the first play. Lots of driving back and forth. Doesn’t help ballet is 30 minutes away. Today is the ballet recital and then nothing. 4 Quote
Popular Post Ron Swanson Jr. Posted June 8 Popular Post Report Posted June 8 Yesterday was my day to host the meeting for the box Makers SIG that I'm part of. I was to give a demonstration on hand cut dovetails. I have never done that in front of an audience. I learned there's a pretty big difference between peacefully working alone at my own speed, And trying to go fast through the process with 5 guys literally standing over my shoulder. Still a good meeting and enjoyable time with a good group though. 11 Quote
gee-dub Posted June 9 Report Posted June 9 It's been one step forward, two steps back today. I threw my hip out about a week ago. Being me, I tried to work around it (I really stink at setting still) so now my back hurts . Long story short, I tried to do some things an alternate way over the last few days since I am a little mobility limited. I made some cumulative errors which came home to roost today during assembly. I got smart and shut the shop down and walked away. I will take a breather until I get back to normal and can resume . 6 Quote
Popular Post Tom King Posted June 9 Popular Post Report Posted June 9 Pam and I got the beaded board up in the ceiling of the bedroom in the barn apartment this morning. Slow, but one step ahead at the time will get it done. Mostly busy with puppies and puppy visitors. 5 Quote
wtnhighlander Posted June 10 Report Posted June 10 @Tom King, what sort of tricks do you use for holding sheet stock against the joists until you can fasten it? Quote
Popular Post Tom King Posted June 10 Popular Post Report Posted June 10 Two sets of hands and plenty of platform ladders at a minimum to stand on. It was easier when I had two big strong helpers, but we managed today. I'd get on my platform first and Pam helped me get the sheet over my head, then handed me the staple gun and got up on her platform to align the rabbeted edge. I had fastener locations marked, so as soon as she said it was right, I popped it. I used a pneumatic stapler shooting 7/16" wide crown 2" leg staples shot on top of the bead that won't need anything but a couple of coats of paint to not be noticeable. A flat ceiling is a lot easier. I can do that by myself with a drywall lift, but it doesn't work that well on a sloped ceiling. The beaded board is not that heavy. Largest pieces today were five feet long. I'll cover the long joints with MDF "boards" only held up with Powergrab so there are no nail holes to have to fair. I've built a fair number of these ceilings since I put one in our dog room in 2004. I put one in the rental house to cover a stained popcorn sheetrock ceiling. Picture of the first one in the dog room. I just covered the stained ceiling up with the beaded board. Sorry, I can't find the picture of the finished ceiling in the rental house. They all look pretty much the same though. And one I just took a picture of in our bathroom. 3 1 Quote
Tom King Posted June 10 Report Posted June 10 Not in the apartment or the back part of that addition on our house. Rockwool insulation between the joists and a sheet of 1" foam under the ceiling joists with the beaded board below that. I try to avoid sheetrock ceilings. 2 Quote
Coop Posted June 10 Report Posted June 10 Completely off subject but, how does one sign off with a saying or quote below their name? 1 Quote
Beechwood Chip Posted June 10 Report Posted June 10 Click on your account name in the upper right corner, account settings, signature. 2 Quote
Mark J Posted June 10 Report Posted June 10 I think the signature line only shows when the post is viewed on a computer, not a phone. 2 Quote
Popular Post pkinneb Posted June 10 Popular Post Report Posted June 10 Over the last couple days: More work on the deck facia here are some pics of how I am doing the corners. Provides a nice clean corner that shouldn't open up over time. Also got the sander put together. This seemed a bit sketch but I followed the directions Then after a bit of cleaning I got it in its permanent location Now I need to find directions for the fence assembly (or learn what appears to be German quick), swap the outlet to match the cord, and 3D Print a dust collector connector to go from 120mm outside to 5" inside. On the deck front, more facia. My goal is to finish the deck this week...we'll see 8 Quote
Popular Post fcschoenthal Posted June 10 Popular Post Report Posted June 10 On 6/10/2026 at 7:59 AM, pkinneb said: learn what appears to be German quick No doubt with Hammer that it is German. I use the camera feature on Google Translate for such things. You can just point the camera at something and it will instantly translate. 5 Quote
Ron Swanson Jr. Posted June 10 Report Posted June 10 @pkinneb did you mention a while back that you're selling an Oliver planer? I may have an interested friend if that is the case. Quote
pkinneb Posted June 10 Report Posted June 10 On 6/10/2026 at 8:19 AM, Ron Swanson Jr. said: @pkinneb did you mention a while back that you're selling an Oliver planer? I may have an interested friend if that is the case. The thought crossed my mind but for now I'm going to keep it, thanks for asking 1 Quote
Ron Swanson Jr. Posted June 10 Report Posted June 10 On 6/10/2026 at 6:11 PM, pkinneb said: The thought crossed my mine but for now I'm going to keep it, thanks for asking Sounds good sir! 1 Quote
Popular Post pkinneb Posted June 11 Popular Post Report Posted June 11 Well after a quick Google search I found a Hammer video and got the fence all set up and dialed in. Looking forward to using this and when you need it out of the way you just lift straight up. 6 Quote
curlyoak Posted June 11 Report Posted June 11 On 6/3/2026 at 10:27 PM, gee-dub said: I have no vanity left. I have lost most of my hair and my physique is far from anything that would turn heads. The Jabra offering at Costco has been our go to for a couple of cycles. We all know that the lobbying for hearing aids to be "medical devices" allows insanely high pricing. My Jabra earbuds rechargeable batteries last longer, the devices work better and are water proof to a couple of meters. You just cannot program your curve onto them. My hearing aids that cost 10 times as much are pitiful by comparison but, until we get things changed it is what it is. An advantage to Costco supplied devices is that they clean and maintain swap-able parts for free. They have even replaced failed wires without charge. On 6/3/2026 at 10:33 PM, Coop said: too am looking at Costco’s aids. I plan on seeing an ent prior to going though There is a big problem in the hearing aid business. The number of different businesses that touch the device before the consumer buys it is far too many. And when the mark up is outrageous. With high pressure sales. They work on commission only. And once they have you in their data you get junk mail forever and hounded on the phone. The white knight is apple.I had the previous model, mediocre, and the most recent air pro 3, and like it. Room for improvement? Yes On special I got a pair a little over $200. The software tests your hearing and adjust each piece to each ear. Apple has a history of constant improvement. And Apple is the only middle man so the margins are not on the crazy side. I tried Costco was not for me. 2 1 Quote
Popular Post Mark J Posted June 11 Popular Post Report Posted June 11 I found out that my Medicare supplement plan does have a hearing benefit, even though Medicare does not. 3 Quote
gee-dub Posted June 11 Report Posted June 11 Re-watched video from the Newport Beach swells at "the wedge" from a couple days ago. This push was so crazy they were getting surfable waves in the harbor. Just nuts; if I tried that water today, I would die. Oh to be young again. 1 Quote
legenddc Posted June 11 Report Posted June 11 Been at the office all week in a lot of meetings with one of the teams I work with every day. Only went out with them one night to one of those paint and sip places. I was a bit surprised my painting turned out okay. Around hearing aids, the markups are all from businesses. My rough estimate on the cost for medical device certification on a hearing aid is less than $1 a pair. 1 Quote
Popular Post Tom King Posted June 11 Popular Post Report Posted June 11 The foam board that I put between the ceiling joists and the beaded board claims it's fire resistant. I decided to put that to the test today since we had a heavy rain last night and it was safe to light the pit I dug to throw scraps in from working on the apartment. I put some waste pieces in the pit and lit it. I didn't even see any flames spread across it, and it just melted rather than made any sign of burning. I'm sure this fire was Very hot. 5 Quote
pkinneb Posted June 11 Report Posted June 11 On 6/11/2026 at 4:12 PM, Tom King said: I didn't even seen any flames spread across it, and it just melted rather than made any sign of burning. I'm sure this fire was Very hot. I've had the same experience in our fire pit, It just melts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.