Recommended Posts

Posted
On 5/11/2026 at 9:15 PM, gee-dub said:

Interesting choice by the seller.  We have hot weather out here al the time and many items show up packed with frozen cold packs.  It seems the seller does not understand their target consumer(?).

Well, that company probably sells pallets of product to amazoid, they store it in their warehouse, and amazoid probably has no idea what's even in the boxes they redistribute.  If I ever buy more of these, it'll be strictly local; in the meantime, pass me that spoon.  :D

I just checked the box out of curiosity, they were manufactured in Germany for Belgian chocolatier Bouchard (aren't I fahncy!  B) ).

  • Like 2
Posted
On 5/12/2026 at 8:26 PM, gee-dub said:

YES, Roundabout came up on the endlessly shuffling playlist in the shop.  I can still remember the first time I heard it setting in my 1967 Chevy Caprice getting ready to drive to school.  That bass sound and bass line . . . ageless.

I know, right?!?  I recently listened to it again, and before I put it on I was wondering if it would seem silly since I was no longer a teenager.  Halfway through I was jumping up and down and punching the air!

Did you listen to the live or studio version?  For me, the live version has much more energy.

Posted
On 5/12/2026 at 6:51 PM, Beechwood Chip said:

I had to look up "b-bender".  You mean those ridiculous guitar poses actually have a purpose? ;)

It’s a spring loaded lever that mounts behind the headpiece or tail piece and pulls the B string to cause a lap steel type sound.  There is also a version that involves moving the guitar's neck.

https://en.wikipedia.org/wiki/B-Bender
 

Posted
On 5/14/2026 at 8:18 PM, fcschoenthal said:

Of course, although YMMV.

The ones that were up originally were 15x60, so figured that would be a good starting place. Since pickets are 5½" wide, I took both edges off to make 2 of them 5". The pickets are 6' and I only needed 5', so I cut the offcuts to 10" for the rails. I wanted the "raised panel" look, so I ripped the other 2 pickets into 2½" strips. I also wanted the appearance of some separation, so I added a chamfer to all pieces. I attached 2 of the smaller to the outside edges of the 5". Then flipping everything over on it's face, I used 1" 18ga staples to tack it all together from the back.

Again, it only took about 15 minutes for the whole process, but I made sure that my wife thought it took a lot longer.

I made some planters with cedar fence pickets last year and found out as the wood dried out the staples stopped holding. Might be worth putting your test outside in a warm sunny place for a few days to make sure it holds.

  • Like 2
Posted
On 5/15/2026 at 7:52 AM, legenddc said:

I made some planters with cedar fence pickets last year and found out as the wood dried out the staples stopped holding. Might be worth putting your test outside in a warm sunny place for a few days to make sure it holds.

These are going to be screwed to the house in 6 spots. The previous ones weren't moved in over 15 years, so there shouldn't be any stress on them, but I've got about 3 weeks before the windows will be installed, so I definitely have the time to run this test. Thanks.

  • Like 1
Posted
On 5/15/2026 at 8:26 AM, Mark J said:

@fcschoenthal, ate you planning to use staples as the permanent fasteners?

I've found that these staples (and I used probably 70 of them) hold well in the soft cedar. Especially when there isn't going to be any stress put on them. It also helps to angle them occasionally in opposite directions.

  • Like 1
Posted
On 5/15/2026 at 8:14 PM, Tom King said:

I went to town tonight and bought the few bits and pieces I need so I won't have to waste that time in the morning.

That is a time killer indeed unless you get there when they open and I’m not an early riser. I left that for the office several years ago. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.