Popular Post legenddc Posted July 6 Popular Post Report Posted July 6 On 7/5/2026 at 10:36 PM, Coop said: I didnt do this today but plan on it in the very near future. We have several 8mm reals of film that our parents took way back when. What is the suggested format to transfer these to and why? For those that have done this, what should I expect to pay? Our local library has the ability to transfer old media to a flash drive, but I wouldn't want to sit there for all of the hours it will take. The frustrating part with videos is needing to be there when it ends. If you're able to send it out, I would get it on a hard drive. From there you could make DVD's or just keep it on your computer. 3 Quote
Popular Post gee-dub Posted July 7 Popular Post Report Posted July 7 Whipped up a batch of my (in my mind anyway) world famous hamburgers. Cooked on the grill. Ground beef seasoned with Kosher salt, Fresh cracked black pepper, smoked paprika, garlic powder, onion powder, chili powder and a little ground mustard. Toast the buns on the grill over the top of the burgers. Add the condiments of your choice and let the eyes roll back in your heads. LOML adores me right now. 7 Quote
Chestnut Posted July 7 Report Posted July 7 5 hours ago, legenddc said: Unfortunately, I seem to have picked up something and I'm sitting on the couch "working" with a 102* fever. Next two days I have all-day calls starting at 4 AM. Hopefully I can nap some in the afternoons. Ever since kids I haven't been healthy over a 4th of July, this one included. I've got an awful cold currently and am powering through while laying hardwood flooring. 1 4 Quote
legenddc Posted July 7 Report Posted July 7 On 7/6/2026 at 10:04 PM, Chestnut said: Ever since kids I haven't been healthy over a 4th of July, this one included. I've got an awful cold currently and am powering through while laying hardwood flooring. Pretty sure I picked this cold up from my sister's 9 month old who was on our vacation. These dang kids. 2 Quote
Popular Post Mark J Posted July 7 Popular Post Report Posted July 7 On 7/5/2026 at 9:36 PM, Coop said: I didnt do this today but plan on it in the very near future. We have several 8mm reals of film that our parents took way back when. What is the suggested format to transfer these to and why? For those that have done this, what should I expect to pay? The thing with transferring old novies/videos is guessing which new media to transfer them to. Our home movies were on videotape. We had them transfered to DVD when tape started to disappear. Now DVD players are getting harder to find. 4 Quote
Coop Posted July 7 Report Posted July 7 On 7/7/2026 at 7:37 AM, Mark J said: The thing with transferring old novies/videos is guessing which new media to transfer them to. Our home movies were on videotape. We had them transfered to DVD when tape started to disappear. Now DVD players are getting harder to find. This is my main concern. 1 Quote
Popular Post gee-dub Posted July 7 Popular Post Report Posted July 7 Many modern TVs let you connect a USB drive to them to play content like photos. I would tend to put the pics on a USB stick. My TV will only accept a 32 gig stick but will accept a 2 terabyte USB drive. We have a digital frame that sets on a cabinet. I put more pictures than you can shake a stick at on a memory stick, plug it into the side and let it run through randomly. Just sharing some ideas. 3 Quote
Popular Post drzaius Posted July 7 Popular Post Report Posted July 7 Not today, but I spent the weekend in the mountains with my eldest daughter and a couple of friends, them running and me volunteering, at an ultra marathon. Sarah and Steve went the full 100Km and Rob ran the 38Km race. There was over 5000M of vertical in the full 100. It poured on an off throughout Friday night and mostly cleared up Saturday with perfect running temperatures. I like to be up and busy while they are running so I put in a 24 hour shift at one of the aid stations. There is an incredible comradery among trail runners that is only strengthened by all that pain an suffering. And the runners just LOVE the volunteers. I'm still on cloud 9 from the experience. 6 2 Quote
legenddc Posted July 7 Report Posted July 7 On 7/7/2026 at 9:30 AM, Coop said: This is my main concern. I think DVD players will make a comeback. There's a trend of people who are buying DVD's instead of streaming services. In 2025 there were $1 billion in vinyl record sales. Years ago, I converted our VHS tapes to digital files. I also made DVD's for my mom and I as backup. 1 Quote
Popular Post Beechwood Chip Posted July 7 Popular Post Report Posted July 7 The trick is to convert them into a digital file. Then you can store those files on CDs, DVDs, USB drives, thumb drives, computers, cloud services like Google Drive, etc, etc. Keep at least two copies in two different media. 3 Quote
Popular Post gee-dub Posted July 7 Popular Post Report Posted July 7 Of course I can't resist chiming in. I have a CD or two. I curse myself for selling a ton of LP's in boxes back in the day but, I digress. All I know is that at this point in history I have hundreds of CDs, several CD players, an original CD Walkman that still works perfectly (man, how I miss the days when we made good stuff), so that when the internet crashes I can still listen to music as long as I can generate electricity. 5 Quote
Popular Post gee-dub Posted July 7 Popular Post Report Posted July 7 Welcome to living in SoCal. I came inside for a break and to have a snack (gotta keep my strength up). As I headed back out to the shop about 4pm I took a deep breath, said "man that feels good; it must be about 80 degrees". Got to the shop and checked the thermometer; It's 95 . . . but it's a dry heat . Seriously, you don't really notice it if you've grown up in it. I remember being in the Florida pan handle and practically passing out trying to get from my hotel room to my rental car. There was a guy walking next to me in a dress shirt, tie, and a sport coat just as happy as a clam!?! 3 Quote
Mark J Posted July 8 Report Posted July 8 18 hours ago, Beechwood Chip said: The trick is to convert them into a digital file. Then you can store those files on CDs, DVDs, USB drives, thumb drives, computers, cloud services like Google Drive, etc, etc. Keep at least two copies in two different media. This seems like a good idea. 2 Quote
Popular Post Jfitz Posted July 8 Popular Post Report Posted July 8 I started installing the "True Grip Clamp Pads" from TWW on all my parallel clamps. They're Jets - I like them. And my first impression of the pads is very positive - good material, good adhesive. I tend to keep my clamp heads pretty clean, but I still recommended the process of removing any glue or other debris and scuffing them (with 150 grit sandpaper) to give the glue a better surface. What surprised me - even after using these clamps for many years - is just how un-flat the head surfaces are. I started with a card scraper to remove any glue spots, and instantly noticed how only the very edges of the surface were getting hit. I then hit them with a sanding block, and again - the middle area got very few scuff marks. Every surface seemed to be a little concave. It's no wonder why "denting" is an issue (generically) with parallel clamps. Most of the clamping pressure is focused around the edges, all but ensuring dents at those points. I hope these pads help bring some amount of uniformity of pressure across the face. 5 Quote
Popular Post Von Posted July 8 Popular Post Report Posted July 8 I only have a couple of parallel clamps but similarly installed the TWW pads on them with a positive experience. Thought about making my own but for the price point they are worth the time I saved. 3 Quote
Popular Post pkinneb Posted July 8 Popular Post Report Posted July 8 On 7/7/2026 at 12:32 PM, drzaius said: Not today, but I spent the weekend in the mountains with my eldest daughter and a couple of friends, them running and me volunteering, at an ultra marathon. Sarah and Steve went the full 100Km and Rob ran the 38Km race. There was over 5000M of vertical in the full 100. It poured on an off throughout Friday night and mostly cleared up Saturday with perfect running temperatures. I like to be up and busy while they are running so I put in a 24 hour shift at one of the aid stations. There is an incredible comradery among trail runners that is only strengthened by all that pain an suffering. And the runners just LOVE the volunteers. I'm still on cloud 9 from the experience. I cant even imagine running that far, I thought a marathon was a lot LOL. Good on you for helping out!! 5 Quote
Popular Post fcschoenthal Posted July 8 Popular Post Report Posted July 8 On 7/7/2026 at 12:55 PM, legenddc said: I think DVD players will make a comeback. I have one setup that I probably won't get rid of, so I put it in a spare bedroom that's not used much. It's a 55" TV and separate DVD player, but both are for 3D DVDs (you've got to have the combo). We got them at least 20 years ago, but they still work great. Luckily, they work with regular streaming and DVD as well. I've only got about a dozen 3D DVDs, but surprisingly, you can still buy them on Amazon. 6 Quote
Popular Post Chestnut Posted July 9 Popular Post Report Posted July 9 Pictue vomit. Been working on this flooring project and looked up to realize the absurd lineup infront of me. Recently obtained was the Rotex 150. HOLY SMOKES does that sander remove material. After buying it i have a new found respect for my ETS EC 150 with 3mm stroke. The scratch pattern is so muich less noticeable. It almost acts like you went up a grit. That small stroke with the powerful motor complements the ro150 nicely. So if you have a rotex and are looking at an ETS EC get the 3mm version. Also not sure if these are new but the paper kits with the systainer are a decent deal. You get $120 worth of paper and a $90 systainer for free basically. This is the newel post design my wife picked out. I was going to add a cap but decided i like it just the way it is. I didn't snad to a high enoug grit so i'll have to take care of these in place. Nor are the edges eased. I used these mounting plates. It's how the old ones were mounted and they were sturdy. These are doing their job nicly. Have the benefit of being easy to shim the posts plumb. Hardwood fully installed and sanded. Finish half applied. Just waiting for '22 and '24 to fall asleep to get back to application. 8 Quote
Popular Post legenddc Posted July 9 Popular Post Report Posted July 9 On 7/8/2026 at 6:03 PM, fcschoenthal said: I have one setup that I probably won't get rid of, so I put it in a spare bedroom that's not used much. It's a 55" TV and separate DVD player, but both are for 3D DVDs (you've got to have the combo). We got them at least 20 years ago, but they still work great. Luckily, they work with regular streaming and DVD as well. I've only got about a dozen 3D DVDs, but surprisingly, you can still buy them on Amazon. We have 3 TVs and 2 of them have Blu-ray players set up. Our family room TV has a Playstation 4 mounted on the wall behind the TV that we can use to play blu-rays, but we don't use it often. In our basement we have a projector (116" screen I think), blu-ray and surround sound hooked up. Recently I purchased a Jurassic World box set for $30 that came with 7 blu-rays and the digital codes. Another old technology making a comeback is house phones. We also recently bought a VOIP phone so our kids can call their friends. Way cheaper than a cell phone and plan plus no brain-rot distractions. 6 Quote
Popular Post gee-dub Posted July 10 Popular Post Report Posted July 10 Some chores front yard and back, a trip to the post office, some work on the guest room dresser, and a trip to the grocery store. That'll about do me ;-) I hope I have enough energy left to cook dinner 'cause I'm gonna be hungry! 5 Quote
Popular Post Chestnut Posted July 10 Popular Post Report Posted July 10 Burned scraps today. A lot of scraps. I did a purge of a bunch of pieces i was saving "because maybe someday". Feels good to have the shop space back. Fire burned a good 10h. 4 Quote
Popular Post pkinneb Posted July 10 Popular Post Report Posted July 10 Well it was a couple days ago but this is what I walked into last Sunday morning...Luckily no damage to the miter saw. That's not supposed to happen LOL Bought some longer and bigger hardware since after looking at it there was probably only 1/2 -3/4" in the stud. I also thinned it out a bit So far so good. Since it lasted the original way for 20+ years so I don't expect any further issues but one never knows Also got some work done this week on the outdoor kitchen 5 2 Quote
Popular Post Chet Posted July 10 Popular Post Report Posted July 10 On 7/10/2026 at 3:17 PM, pkinneb said: Luckily no damage to the miter saw. Bosch Glide is probably one of, in not the only miter saw that could have survived that. 3 Quote
Mark J Posted July 11 Report Posted July 11 14 hours ago, pkinneb said: Luckily no damage to the miter saw. Still, probably worth checking the alignment, at least for 90*. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.