Popular Post gee-dub Posted July 11 Popular Post Report Posted July 11 I was wondering why the shop was so warm. I mean we have been having mid-90s temps for a week but we are used to that. I finally slow down enough to check and realize I have skipped my HVAC filter check schedule . . . twice. These little buggers are handy to have and cheap at Horror Fright. Despite the HVAC being set to 68 I was getting mid 70s out of the system. I checked the filters and they didn't look all that bad (read denial here). These are additional filters set on top of the inside units entrance area. While I was playing Inspector Gadget, examining the filter I noticed a marked drop in the room temperature. Sure enough my exhaust air went from mid 70s to mid 50s with the dirty filter out of the way. I ordered more filters since I am down to my last pair. I will change the reminder alarm to something more annoying so that I don't pull this stunt again. BTW, the price of these 'Made in the USA' filters has gone up over 66% in the last 3 years. 7 Quote
Popular Post gee-dub Posted July 12 Popular Post Report Posted July 12 On 7/11/2026 at 1:49 PM, wtnhighlander said: What's up with Jake & Elwood? A company I worked for during the dot.coms had fleet vehicles so almost everyone drove the same car, same color. I would put a sticker in my back window to make it easier to find my car in the parking lot. Usually it was Spaceman-Spiff or some such . . . I just never got around to using the Blues Brothers sticker and came across it in one of my old zippered gate-mouth tool bags while building out the new shop some 20-odd years later. Time is funny. I built out BillPoint.com which became PayPal.com, I built out Yahoo's cache farm search tech before anyone heard of Google. Those were the days of 20-somethings having access to millions in venture capital but, still being 20-somethings. Lotsa weird stuff happened back then . At 40-something I was always the "old guy" in the room. People didn't really know how to take me. 4 Quote
Popular Post drzaius Posted July 12 Popular Post Report Posted July 12 On 7/10/2026 at 4:17 PM, pkinneb said: I find that the quality of lag bolts to be so variable (usually terrible) that I don't even use them any more. Structural screws like GRK, etc, are much stronger and more consistent. 5 Quote
Popular Post pkinneb Posted July 12 Popular Post Report Posted July 12 John G I did indeed check and it was still spot on. It appears the arm just slid forward. On 7/11/2026 at 9:51 AM, Chestnut said: @pkinneb where did you get the zip ply? Home Depot like $27 a sheet. On 7/12/2026 at 12:21 PM, drzaius said: I find that the quality of lag bolts to be so variable (usually terrible) that I don't even use them any more. Structural screws like GRK, etc, are much stronger and more consistent. Ahh man that is so true and I had those on hand face palm lol Further progress on the kitchen, been a little slow as it is so hot here, low 90s, even the pool water doesn't feel that refreshing. Anyway First up I anchored it to the slab with Tapcons Then I worked on trimming out the doors. I wanted them to stick out so that they weren't totally buried in the rock so I fir'd them out an inch. Then wrapped them with tape before installing the doors. On the smaller door I had a bit of a high spot so quick work with 40 grit solved the issue. With that done I moved on to framing out the grill area I cut but did not install the zip here as I have some wiring to do that will be easier with it open Just need to cut in, fir out the two vents in the back wall, then finish tapping all the seams and it will be time to install the rock veneer. I was planning to take this week off to do that but unfortunately there are 90's forecast all week and I will probably need 8-10 hours to do the rock, no way I can do a a 10 hour day in that heat and I don't want to rent a saw for more than a day so I guess we will see. At this point I am pushing my week off hoping next weeks weather is better, fingers crossed. 5 Quote
Popular Post legenddc Posted July 12 Popular Post Report Posted July 12 90s is too hot to work outside. It’s only in the 80s here today but no breeze. I picked weeds in our backyard for almost an hour at 7 AM. A little while later my wife and I cleaned the AC unit. I was drenched by the time we got the metal panels installed. Came in and installed the thermostat to the wall. Hung a pull up bar in my son’s doorway. After a shower and putting the tools away we went over to our neighbors to give them a going away present. Our one friend made a painting for them and I made the frame. Not her painting in the picture. 7 Quote
Popular Post Chestnut Posted July 12 Popular Post Report Posted July 12 Processing about 90 LF of base. Running it in walnut. My parents bought a boatload of walnut to make a kitchen table and chairs and then backed out. They paid for the wood and then just told me to keep it. It was all 6/4 material that resaws and mills to 5/8" which is perfect for base. Question to the group. Should i put the backout cut in all the trim? I was going to do 2 passes with the dado stack to remove about 1.5" out of the center of the 3" trim. Just not sure if i need to or what the point is. 5 Quote
Beechwood Chip Posted July 12 Report Posted July 12 Got a little wind yesterday. This is a couple blocks from my house. I'm fine, but this took out power to a few blocks. 1 7 Quote
Popular Post wtnhighlander Posted July 12 Popular Post Report Posted July 12 @Chestnut, my understanding is that the relief cut on the back of commercial base board helps it lay flat over what is often an uneven lower edge of the drywall. I can't think of any other reason it might be necessary. 3 Quote
Popular Post Chet Posted July 12 Popular Post Report Posted July 12 On 7/12/2026 at 11:45 AM, Chestnut said: Should i put the backout cut in all the trim If my ancient mind serves me correctly, the backout cut was to help prevent twisting, cupping and warping along with what Ross mentions above. 5 Quote
Popular Post Tom King Posted July 12 Popular Post Report Posted July 12 Baseboard was used for hundreds of years before any was relieved on the back. In all the new houses I built, I just used boards (almost always 1x8's) with a base cap. Toenails in the top to be covered by the cap and at the bottom to be behind the shoe molding. Take every chance to avoid puttying holes. Cap was prefinished and another streak brushed over the whole length where the nails in that were. Saves cutting in. 7 Quote
Popular Post gee-dub Posted July 13 Popular Post Report Posted July 13 @Tom King - I love learning from your years of experience. I'm all for book-learning and magazine articles but hearing from someone who has had their hands in it is at another level. 5 Quote
Popular Post Tom King Posted July 13 Popular Post Report Posted July 13 Fixed yet another heat pump problem in the rental house today. If you remember the burned up electrical wire fix, I saw a gap in the return duct system when I was fixing that, but today was the first overcast day with no guests in the house to go back up in the attic to fix it. I must have bumped it on my way out after the wiring fix because it wasn't this large before. The old return duct coming up from below had separated from the elbow turning to go to the intake of the air handler. Today it was about 2-1/2 x 24". It felt like it was pulling more air in there, unfiltered out of the attic, than it was pulling through the filter. I cleaned it and taped it up with metal duct tape. When it cools off this Fall, I'll go back up there and spray foam over it. It will be interesting to see how much the electric bill goes down. It has to make a difference. This had to be done by the same pro that did the wiring to install the new 2010 heat pump in this older house. He had used regular duct tape, which is not really meant for ducts, and spread mastic over it. The cloth duct tape just tore. There's no telling how long it had been operating like this. 4 Quote
Popular Post Tom King Posted July 13 Popular Post Report Posted July 13 On building new houses, I did a lot of things differently than anyone else did. I learned to start with from some old guys I hired who had been carpenters their whole lives, but they all died in the early 1990's and had quit work some years earlier. After they quit working, I just hired unskilled guys that no one else would hire to hold ends and move stuff. I gradually came up with my own ways of doing almost everything in the building of new houses. I have wished many times that those guys could see some of the stuff I built after they were gone from here. In building a new house, when you do everything, you can plan ahead for the next step. Those transitions are where most of the problems come from. The sheetrock guy will say it's the tile guys fault, and vice versa. The trim carpenter leaves the painting up to the painting guys. There are a lot of steps that can be saved when doing everything, and the end result ends up just better in the process. 5 Quote
wtnhighlander Posted July 14 Report Posted July 14 Tom, this post brings a question to mind. What tape do you recommend for the insulation wrap on the round metal duct? I had to peek into my crawlspace last week, and noticed that a section of duct recently replaced by the 'pros' had the tape break loose and the fiberglass wrap was falling off. Quote
Popular Post Tom King Posted July 14 Popular Post Report Posted July 14 Look in the ductwork section in Lowes or Home Depot. Somewhere around there will be some metal tape that you have to pull the paper backing off of as you use it. The paper backing is not exactly easy to get started coming off. Use a damp rag to wipe off the dust first. While doing that, wear a 3M 8511 dust mask. It will have some dust all over it that you don't want in your lungs or sinuses. Don't try to apply a long piece at the time unless you have another pair of hands helping. It sticks to itself easily if you get too greedy with lengths of pieces by yourself. On a clean surface, it will stick so good that you might as well say you can never get it off. What we know as "duct tape" is not really for ductwork. I went up in the other end of the rental house this morning to put some cleaner in the condensate trap. When I took out the little plywood door to that end of the attic I was blasted with cold air. The whole big flex duct coming off the air handler had fallen completely off and down so all the air was being blown into the attic. Pam was cleaning the house yesterday in preparation for guests coming today and had both units set on 71. The one in the other end that I sealed up that duct yesterday on is now working so well that the whole house was 71 degrees even with the back unit blowing all it's production into the attic. No telling how many hundreds of dollars those things have cost us. I know the back unit duct was okay earlier in the Spring when I went up there to drop some cleaner things in the trap but it didn't seem like it was working like it should for cooling earlier in the Summer. I had been worried that I might have to get into replacing that system in the Summer, but at least was glad to find out that it's working fantastically as long as the ductwork is intact. I had fine tuned the charge in that one several years ago after having to replace a leaking line set and looks like the units are working like they should. 3 1 Quote
Popular Post Beechwood Chip Posted July 14 Popular Post Report Posted July 14 On 7/14/2026 at 11:08 AM, Tom King said: What we know as "duct tape" is not really for ductwork. Duck tape is made from duck fabric. "Duct Tape" came from people misunderstanding the name, but has become so commonly used that it's an accepted alternate. 4 Quote
fcschoenthal Posted July 14 Report Posted July 14 On 7/14/2026 at 10:08 AM, Tom King said: metal tape that you have to pull the paper backing off of as you use it. That's the only kind I use with HVAC and on my dust collector fittings. I'm constantly amazed at the half-a$$ed job some people think is OK. 2 Quote
Popular Post gee-dub Posted July 15 Popular Post Report Posted July 15 Sweating. I was wondering why it was so hot early this morning. I checked and I guess we'll hit 102 today. Not that unusual for our area in July. At least the humidity is only around 45%. If it gets higher I have to keep a good eye on my AC condensation drains. I had a shop unit back up once a few years ago; spiders. I added buried French drains for the house and shop units and have never had a problem since . . . fingers crossed. 5 Quote
legenddc Posted July 17 Report Posted July 17 Gross here today with the wildfire smoke from Canada. We're under either a Code Red or Code Purple air quality. Its incredibly hazy outside and smells of smoke once you open the door. Not sure what we're doing after work today, probably not going to an outdoor concert like we had discussed. 2 Quote
drzaius Posted July 17 Report Posted July 17 Here in Alberta we've had clear air this summer for the first time in years. They are predicting lots of wild fires in BC coming up. I can't believe they even have anything left to burn over there 5 Quote
Popular Post Chestnut Posted July 20 Popular Post Report Posted July 20 Base installed for 75% of the room. This was the hard bit that all tied. I wanted the top of the base to be level. So not having a laser i went around the room with tape and a 4 foot level. There is 3/8" difference from the highest point and lowest point. Both points are 2 feet apart. The high point is the corner in the lower right of the picture above. The low point is 2 feet to the right. Most of the floor undulated 1/16" up or down. 7 Quote
Popular Post gee-dub Posted July 21 Popular Post Report Posted July 21 The Moon Tonight . . . Queue the creepy 1960s black and white horror movie music . . . . 1 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.