Mark J Posted October 18, 2018 Report Posted October 18, 2018 Has anyone ever wished for a variable speed bandsaw? Is there any point? I just happened across this press release: RIkon is offering the DVR motor and controller from Nova for bandsaws. https://www.finewoodworking.com/2018/10/09/press-release-new-rikon-smart-dvr-control-motor-model-13-926 I'm not sure if Rikon is going to put this on a bandsaw model, or if this is an upgrade to existing bandsaws? Quote
Chet Posted October 18, 2018 Report Posted October 18, 2018 I think the only real use for a variable speed band saw in the shop is if you are also doing some metal work that need cutting on a band saw. Quote
RichardA Posted October 18, 2018 Report Posted October 18, 2018 How much time does it take to slip a belt? Not much in my opinion. Quote
gee-dub Posted October 18, 2018 Report Posted October 18, 2018 There was obviously enough response to market research to make it worth bringing to market but, I don't think woodworking was their focus. Quote
Popular Post bleedinblue Posted October 18, 2018 Popular Post Report Posted October 18, 2018 When are they going to make a model with automatic blade changes? 1 2 Quote
treeslayer Posted October 18, 2018 Report Posted October 18, 2018 Sometimes I wish my Jet was variable speed so I could cut aluminum but I do it so rarely and cutting it on the TS works great for straight cuts. Quote
wdwerker Posted October 18, 2018 Report Posted October 18, 2018 My old Rockwell/Delta 14" is a 5 speed. Full speed for regular wood cutting and 4 slow speeds for cutting metal. It has a geared transmission. I bought it because it had heavier castings & I wanted to add a height kit. I put a hacksaw type blade on it and cut 3" thick solid brass like it was butter. I might change speeds once or twice a year but heavier castings & bigger motor on a used saw cheaper than a new regular bandsaw was an easy choice. Back then made in the USA was the norm. Adding Carter ball bearing guides, Ittara spring & a crank height handle were upgrades I made that weren't even available when I bought it in the 80's. But variable speed DVR seems kinda gimmicky to me. Quote
Mark J Posted October 18, 2018 Author Report Posted October 18, 2018 2 hours ago, bleedinblue said: When are they going to make a model with automatic blade changes? Or a self sharpening feature. 1 Quote
Steve B Anderson Posted October 19, 2018 Report Posted October 19, 2018 At the manufacturing facility I work at we saw from 1” to 16” diameter material ranging from Aluminum to Nickel Alloys and this requires a saw with feed and speed control. I have a Laguna 1412 in my home shop and I have to say that the band speed is a little slow for most hardwoods but the cuts have been clean in every species I have cut so far. Personally I don’t think that a varible speed moter would really make that much difference sawing wood. Quote
Damon777 Posted October 25, 2018 Report Posted October 25, 2018 I'm late to this party, but I have a VFD on my bandsaw to make the three phase conversion. I never slow it down, as I don't cut metal on it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.