Recommended Posts

Posted

Can you explain the string thing to me?

Are you going to put some kind of handle on the top plywood sheet so you can lift it up if you ever want to open it?

If you're going to get some of the rack out with the weight of the bench top, it might be better to get the workbench top on before you screw down the top sheet of plywood on your "sand box", since it's going to add rigidity. 

  • Like 2
Posted

I agree with Ron and the others on waiting until your done. I would add when you do do it make sure the assembled bench is in its final resting place and then shim it until its level. FWIW typically I would take material from more then one leg.

  • Like 1
Posted

That ought to work.  People wonder why I make my work surfaces level with Mother Earth.  It is so I can use a level for such things.  At times the distance is greater than my longest level.  The strings are a sure cure for that.  Well done.

  • Like 2
Posted

This is looking good Von.  I really like the appearance of your base with the knots and all, it is going to have some good character to it.

  • Like 2
Posted

I have successfully treated knots and sap wood with CA or super thin epoxy (look at US Composites, Composites Envisions, and so forth}. I don't really see any areas where my "spider senses" would fire off over the knots shown.  The mass of the surrounding material is probably more than adequate . . . JMHO.

  • Thanks 1
Posted
On 6/13/2026 at 10:19 PM, gee-dub said:

I have successfully treated knots and sap wood with CA or super thin epoxy (look at US Composites, Composites Envisions, and so forth}. I don't really see any areas where my "spider senses" would fire off over the knots shown.  The mass of the surrounding material is probably more than adequate . . . JMHO.

Thanks. I did some treating of knots with epoxy (just used thicker "table top") where I thought knots might work loose over time. I covered this a few posts in this thread ago, but short story: it's amazing how distant knots can be connected and how far epoxy can flow. Close up every hole on a board before you do this.

  • Like 1
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 65 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined