Recommended Posts

Posted

Do you folks have any recommendations for LED lanterns to be used for power outages, and such.

I have some fluorescent tube lanterns that run on D cells.  These are presently OK, but they are old.  I would like to get some replacements that use LED's.  I am looking for a lantern that can throw some light, 800 lumens would by good.  And diffuse circumferential illumination, rather than a flashlight like spot.   

What I see primarily in stores is small toy like lanterns boasting luminance in the double digits or low 100's. 

Do you have a lantern you like?

  • Like 1
Posted
On 8/27/2025 at 12:04 PM, Mark J said:

Do you folks have any recommendations for LED lanterns to be used for power outages, and such.

I have some fluorescent tube lanterns that run on D cells.  These are presently OK, but they are old.  I would like to get some replacements that use LED's.  I am looking for a lantern that can throw some light, 800 lumens would by good.  And diffuse circumferential illumination, rather than a flashlight like spot.   

What I see primarily in stores is small toy like lanterns boasting luminance in the double digits or low 100's. 

Do you have a lantern you like?

Not exactly LED but my Coleman Propane Lantern has always served me well. I know they also make battery powered options. Probably not exactly what you had in mind, but they do work well. 

  • Thanks 1
Posted

I would use a tool battery powered light if you have a bunch of batteries already.

This might work. You can buy adapters if you don't have Ryobi batteries. According to the Q&A "This light can get 9 hours of runtime on high, 15.5 on medium, and 48 on low with an 18V 4Ah battery. When using a 2Ah battery, the runtime on low is 21.5 hours, medium is 7 hours, and high is 3.5 hours."

 I have a Ryobi like this and an adapter to let me use my Dewalt batteries. I had it on low with a 6ah battery and it easily lasted all day with plenty of battery left.

Some of the light have a USB charger so you can charge your phone with the tool battery. 

  • Like 1
  • Thanks 1
Posted

If you expect to have power outages lasting a day or more, I suggest having lights that burn fuel as well, or some means of recharging batteries.

FYI, I have kept my entire house lit and warm through outages of several days, with only a 4kw portable generator feeding 240v back into the panel through a dryer outlet. The 20 amp breaker on the genny never tripped. HVAC heat is propane, electric just for controls & fans. My electric water heater ran, and we made judicious use of the stovetop or microwave, not both at once.

I don't trust the panel main to be open since I can't see the contacts. For safety of the linemen, I called my utility to alert them, and pulled the meter from its base. They warned I might be penalized, but I think they actually appreciated the extra layer of separation. I wasn't the only one backfeeding from a genny, but most just opened the panel main.

  • Like 1
Posted
Posted

Thanks Mark and please do let us know.i have several LED collapsible solar powered as well as rechargeable with USB. They provide adequate lighting to move around at night and to read by. I am thinking seriously about getting a whole house generator due to our location. 

  • Like 2
  • 3 weeks later...
Posted

I have oil lamps and flash lights in every room, the oil lamps run for hours but, I don't need them for very long after I fire up my generator. At night when I put away the generator I break out the oil lamps again.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 63 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined