pkinneb Posted December 28, 2016 Report Posted December 28, 2016 13 hours ago, wdwerker said: Just wipe the tenons with some laquer thinner, let that dry and glue normally. Good to know thanks for sharing! Quote
Ronn W Posted December 28, 2016 Author Report Posted December 28, 2016 15 hours ago, wdwerker said: Just wipe the tenons with some laquer thinner, let that dry and glue normally. Thanks, A quick trip to home depot for the thinner and gluing is now underway. I can see the light at the end of the tunnel, now. Quote
Popular Post Ronn W Posted December 28, 2016 Author Popular Post Report Posted December 28, 2016 Glue-up begins. Glued end frames together. Used my gluing board to hold assembly square. It's getting pretty beat up and it has a slight warp. Time for a new one soon. Slight warp not good enough for gluing up the support frames. So used work bench with some block clamp in place for squaring. Love the split top workbench! For this step the legs are not glued to the rails they are just helping hold everything in place. This is the top support frame. The key here is that the cross pieces must bear flat on the workbench while the legs bear solidly on the 1/2" thick MDF shims. If they don't, the shelf will not sit properly on the cross pieces. I am prepare to have to hand plane a cross piece of it slightly off, but I don't want to. I will glue up the support frame for the lower shelf in the upper shelf position so that I can use the same method. Then move it to the lower shelf position for final assembly. Sure hope that I am not making any rash assumptions like, "Of course, It will fit properly in the lower shelf position." 4 Quote
Popular Post Ronn W Posted January 1, 2017 Author Popular Post Report Posted January 1, 2017 Project Complete. Done for the new year - Not that means anything. Finished with finishing 2 days ago. Assembled today. Marking and drilling holes for cleats. Do not drill too deep. Do not drill too deep. The top was easy with the table upside down on the bench, But it took me a few minutes to come up with an easy way to attach the lower shelf and not have anything move in the process. Use the end of the bench. Too cold to take pictures outside in daylight so flash will have to do. Here it is Thank you all for riding along on this trip Happy New Year. 9 Quote
mat60 Posted January 1, 2017 Report Posted January 1, 2017 Man.....Your table and work look great. Thanks for taking us along and Happy New Year. Quote
Alan G Posted January 1, 2017 Report Posted January 1, 2017 Wow. Looks incredible. I really enjoyed following along. Quote
wdwerker Posted January 1, 2017 Report Posted January 1, 2017 That's going to get lots of second looks when folks notice something's going on with the legs ! Curly maple and walnut, always a favorite combo ! Quote
..Kev Posted January 1, 2017 Report Posted January 1, 2017 That turned out awesome! I remember your first post on the legs and you weren't sure how to pull it off. Way to stick with it! Quote
Chet Posted January 1, 2017 Report Posted January 1, 2017 Absolutely Outstanding Ronn. Great way to end the year. Quote
bradpotts Posted January 1, 2017 Report Posted January 1, 2017 Looks great! I like how you did the slight curve in the top. There is a lot of figure on that maple as well. Quote
Ronn W Posted January 1, 2017 Author Report Posted January 1, 2017 Top shelf is not curved. It is either an illusion or my shop is really a magical place. Thanks. Quote
bradpotts Posted January 1, 2017 Report Posted January 1, 2017 Ha ha sorry I meant skirt not too Quote
Ronn W Posted January 1, 2017 Author Report Posted January 1, 2017 Oh! All skirts are and "Arch shape" rough cut on band saw, tape MDF template on piece, use router table. There are 2 pics of the bit that I used. Love that bit. Quote
pkinneb Posted January 1, 2017 Report Posted January 1, 2017 Turned out awesome Ronn! The legs and the curly maple look amazing together. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.