Recommended Posts

Posted

I look forward to seeing how you make the legs they are a cool design. Fwiw you may want to give Bell Forest a try on the maple I have gotten some awesome figure from them both curly and Birdseye. 

Posted

Really like the curved aprons and the floating top but I really can't wait to see the twisties and how they are made!

Sent from my SM-G920W8 using Tapatalk

Posted

So here's our stack of BE, Ronn. As you can see, it's a mixed bag, some fantastic and some mediocre with either light figure or heavy heartwood.

21bea09ac51daa21a19850f1098d563f.jpg

ab5fa53edc30fe374e337ff31fa35fc3.jpg

b8b334038412d5185503b702db8c87db.jpg

And here's a bonus pic of goat sack because my fat fingers added it accidentally and it's more fun to keep it than delete it.

a77aa2d213ac267c012cc2b35bf66027.jpg

Sent from my SCH-I545 using Tapatalk

  • Like 1
Posted
10 hours ago, Eric. said:

So here's our stack of BE, Ronn. As you can see, it's a mixed bag, some fantastic and some mediocre with either light figure or heavy heartwood.

Eric,  Thanks so much.  I stumbled across 2 wide curly maple boards today at woodcraft for $4.50 / BF.  could pass that up. 

However, now I have a dilemma........I had planned to make the table 44" x 14" (no other other furniture in room in unknown).  I can get 11 3/4" width max out of the boards I bought. My options are:

1. Redesign for 44" x 11 3/4"

2.  Rip the boards and make top and lower shelves out of two 7" boards.  I am afraid that the joint will be too visible since the figuring would looked "chopped off" on each side of the glue joint.

3. Rip the boards to about 11" wide and put a 1 1/2" walnut trim piece along each long edge to get 14"

4.  Rip the boadrs to about 6 1/2" and re-glue with a 1" strip of walnut right down the center to get 14".

Please put your design hats on a tell me what you would do or not do.  2 pics below.

I am leaning towards #1 so that I have a very nice uninterrupted curly maple board that will contract nicely with the walnut base.P1010001.JPGP1010002.JPG

PS.  I attended a class on shellac today.  Never used it.  I have another tool in my finishing box.

Posted

I like option #1 as well. What' 21/4", on a table anyway? I think the walnut strip down the middle will make it look like a surfboard. I will retract that statement if you decide to go that route;). 

Posted
29 minutes ago, Ronn W said:

 

 

3. Rip the boards to about 11" wide and put a 1 1/2" walnut trim piece along each long edge to get 14"

 

This is an example of how that looks!

DSC01103 (800x600).jpg

DSC01104 (800x600).jpg

DSC01105 (800x600).jpg

Posted
22 minutes ago, K Cooper said:

I like option #1 as well. What' 21/4", on a table anyway? I think the walnut strip down the middle will make it look like a surfboard. I will retract that statement if you decide to go that route;). 

Ditto.

$4.50/bf for wide curly maple?  Can't beat that...you did good.

Posted
8 minutes ago, RichardA said:

This is an example of how that looks!

DSC01103 (800x600).jpg

DSC01104 (800x600).jpg

DSC01105 (800x600).jpg

But you have the outside edges walnut as well and not just a small stripe down the middle. Makes a world of difference. Guess I didn't see option #3. 

Posted

Option 4 -- Buy some new stock, stick to your original plan and keep your wide curly boards for another project.  They will certainly will get used.  

I would avoid the racing stripe.  It will detract from the main show in your piece, which is the twisting legs.  When you have one unusual element you want to highlight, it's best to keep the rest simple.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined