Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Silicone Mat

Featured Replies

Does anyone use a silicone mat for glue ups?  I see Rockler just put one of theirs on sale but I would like something larger to throw on top of my assembly table when needed.  Preferably 4' x 4' without ridges.  Sorry for the links, pictures aren't cooperating today.

 

http://www.rockler.com/rockler-silicone-project-mat?utm_source=google&utm_medium=cpc&utm_term=&utm_content=pla&utm_campaign=PL&sid=V9146&gclid=CPrgiev5ltACFQ8vaQodm_0DXw

 

I found this one but I'm not sure how glue resistant it would be.

http://www.mscdirect.com/product/details/31939564

 

Thanks,

Cody

I have my assembly table thickly coated in poly and waxed. When i get glue on it i try and wipe it off with a wet rag, if it dries it usually comes off easy enough.

I use the hardboard with markerboard coating on the one face. I used to scrape it with a chisel after every glue up and the glue droplets would pop off with ease. Then, i became lazy and stopped doing that. I now have about 1/4-1/2" of dried glue caked on the top of the markerboard. I dont like to think how much $ in TBIII that is. If it is just a few glue ups here and there, the poly on my workbench protects very well against glue drips. If you are cranking out a ton of messy glue ups, just use something disposable to cover up the surface.  

I was given one unasked and it is nice for small glue ups.  For larger stuff I keep a roll of kraft paper and I'll cut a sheet to cover my workbench. 

25 minutes ago, Gilgaron said:

I was given one unasked and it is nice for small glue ups.  For larger stuff I keep a roll of kraft paper and I'll cut a sheet to cover my workbench. 

This is my method laso.

  • Author
I use a #4 on my benchtop, AFTER glue-ups!

Haha, good to know.

Thanks for the tips. I use the builders paper as well but it's a pain unless you have the project elevated off of it. I think I have 4 or 5 coats of poly on the table but it never seems to be as glue resistant as everyone says it should be. Maybe I just need more. I was hoping to use the silicone cover for sanding as well. I know Marc has one on his Roubo but I'm not sure if it's silicone or glue resistant and I can't seem to find the video where he talked about it.

I use paper over the entire top and then waxed paper under the glued joints.

I've got a couple coats of Danish oil on my bench and glue pops right off with a beater chisel without effort.

I do use foam panels on top of the bench, but that is to protect work pieces from getting dented during assembly and/or sanding.

I use a half sheet of 3mm MDF placed on the bench top. Fits nicely and stores up against a wall. I picked mine up with a delivery of ply but it's cheap enough to not worry about getting glue on it.

I suppose the silicone mat could be used when sanding or routing as a non slip pad?

I use a weaved pond liner scrap made from low density polyethylene (LDPE). It covers the entire assembly table and is totally glue resistant including epoxy (glue just beads up on it and you can peel it off when cured). When finished with a glueup or applying a finish it just folds up like a tablecloth.

I use a roll of butcher paper, mounted under my assembly table, and just roll out enough to cover the top the rip or cut and if there's not much glue on it, I fold and reuse or just toss it!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.