Foushee Posted August 2, 2017 Report Posted August 2, 2017 A very good friend and old client of mine surprised me with a 5HP Industrial Sawstop as a thank you for all of the years of help I've provided him and his company and now I'm sitting here staring at this 700 pound palette of table saw nirvana without a clue where to begin. I'm not anticipating any issues with the wing assembly but getting this beast off of the shipping crate and palette and onto the mobile base is a head scratcher. I do have access to an engine hoist, but worry that there might not be a good place to lift the cabinet without causing damage. Does anyone here have any tips? Quote
Popular Post wdwerker Posted August 2, 2017 Popular Post Report Posted August 2, 2017 I wish I had your problem ! How about a case of beer to entice some help ? 3 Quote
Foushee Posted August 2, 2017 Author Report Posted August 2, 2017 19 minutes ago, wdwerker said: I wish I had your problem ! How about a case of beer to entice some help ? That's my plan B. Quote
wdwerker Posted August 2, 2017 Report Posted August 2, 2017 Engine hoist dead center at each end one at a time. Get it up on blocks till you can pull the pallet out. 2 Quote
Cygnus A Posted August 2, 2017 Report Posted August 2, 2017 I have the Sawstop PCS and just tipped it up off the palette onto a mobile base by myself. No hoist. No jacks. Nothing. It wasnt that bad. The instructions that come with it are very good and show you how to uncrate and assemble it. Congratulations on an amazing saw. 1 Quote
Foushee Posted August 2, 2017 Author Report Posted August 2, 2017 5 hours ago, Cygnus A said: I have the Sawstop PCS and just tipped it up off the palette onto a mobile base by myself. No hoist. No jacks. Nothing. It wasnt that bad. The instructions that come with it are very good and show you how to uncrate and assemble it. Congratulations on an amazing saw. Thank you, and thanks for the tip. Looking at this a bit more I'm starting to think wdwerker's case of beer (keg?) plan might be the best route. Quote
minorhero Posted August 2, 2017 Report Posted August 2, 2017 Open up the box and pull out the instructions inside they should give you some detailed information on how to tip the saw upright. You can do it by yourself, however as someone who did do it by himself I will say with absolute certainty that you should have at least one other person with you to help you do this. If nothing else it will save you some muscle strain. Quote
Foushee Posted August 2, 2017 Author Report Posted August 2, 2017 12 minutes ago, minorhero said: Open up the box and pull out the instructions inside they should give you some detailed information on how to tip the saw upright. You can do it by yourself, however as someone who did do it by himself I will say with absolute certainty that you should have at least one other person with you to help you do this. If nothing else it will save you some muscle strain. I know this is an idiotic question, because I haven't even cracked open the crate yet and it will be apparent once I do, but you said "they should give you some detailed information on how to tip the saw upright." Does that mean this saw is shipped on it's side? I couldn't find any pictures online of an unboxing that shows what the saw looks like in the crate (some of the PCS model, but none of the industrial). [edit - just a quick note, I'm waiting to open the crate until I can get a 220V outlet wired where this saw will go, with my schedule that'll probably be this weekend] Quote
minorhero Posted August 2, 2017 Report Posted August 2, 2017 31 minutes ago, Foushee said: I know this is an idiotic question, because I haven't even cracked open the crate yet and it will be apparent once I do, but you said "they should give you some detailed information on how to tip the saw upright." Does that mean this saw is shipped on it's side? I couldn't find any pictures online of an unboxing that shows what the saw looks like in the crate (some of the PCS model, but none of the industrial). [edit - just a quick note, I'm waiting to open the crate until I can get a 220V outlet wired where this saw will go, with my schedule that'll probably be this weekend] I actually have the professional not the industrial model so I can't swear to it one way or the other. The professional model though comes on its side even though the crate was quite large. I would take a peek and see what you're going to need to do if it is on its side versus if it's upright. 1 Quote
drzaius Posted August 2, 2017 Report Posted August 2, 2017 I'm sure they take the same care & detail with the ICS as they do with the PCS. I assembled my PCS by myself & it was ridiculously easy. 1 Quote
Tom King Posted August 4, 2017 Report Posted August 4, 2017 For ideas to save a back, skip to about 2:40 in this video, or watch the whole thing for fun: 2 Quote
wtnhighlander Posted August 5, 2017 Report Posted August 5, 2017 All you need is the proper lever, and a place to stand .... 2 Quote
TTOKC Posted August 5, 2017 Report Posted August 5, 2017 I have the ICS also, but mine came fully assembled on the mobile base it took three of us to get it on my trailer when I picked it up. It was a bit of a circus getting it off the trailer by myself when I got home. 1 Quote
Dave H Posted August 5, 2017 Report Posted August 5, 2017 20 hours ago, Tom King said: For ideas to save a back, skip to about 2:40 in this video, or watch the whole thing for fun: My kind of guy, working alone has it's challenges, also some ingenious solutions. 1 Quote
Mick S Posted August 5, 2017 Report Posted August 5, 2017 I also have the PCS and like others have said, open the box and follow the instructions. They are, without any doubt, the best instructions I've ever seen for assembling a piece of equipment. They show step by step how to tip it upright. 2 Quote
Bankstick Posted August 6, 2017 Report Posted August 6, 2017 Good luck in setting up the saw. As for the guy with the stone block, I always heard all that ancient stuff was build by space aliens. 1 Quote
Foushee Posted August 7, 2017 Author Report Posted August 7, 2017 Thanks to everyone for the tips and the video, although I was fully expecting the "one hand" trick to be him pulling the lever on a large crane; great video though. Quote
Minnesota Steve Posted August 7, 2017 Report Posted August 7, 2017 My Sawstop PCS had these instructions written in Egyptian hieroglyphs which showed you how to get the base off the pallet and upright properly. It involved turning things in the right orientation and then tipping it off. But I couldn't figure out which way was the right way after looking at the pictures. I finally just went to youtube to see if someone else had done it. Once I saw someone else did it, the sawstop instructions made sense. Quote
Marmotjr Posted August 7, 2017 Report Posted August 7, 2017 Do they come with signs that say "Do not sit on the table saw?" Cause the new shop I started in today has a bunch of saw stops that have those plastered all over them. Makes one wonder..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.