Ronn W Posted March 23, 2018 Report Posted March 23, 2018 Got a puddle of Aem-R-Seal on the aminate floor in my wife's sewing room. Arrrggh! She hasn't seen it yet. I discovered that it comes up (peals off) easily with a chisel plane or razor blade. You can go a little farther by rubbing what's left with a piece of very hard wood that will wear away the ARS without scratching the laminate. Rub with the end edge of the wood for max presssure and use the end grain (its harder). If yourr laminate is texture (like a wood grain), you can have some success digging in the wood grain with the corner of the razorblade and popping samll pieces of ARS out. It won't be 100% - more like 99%. PS, I have not tried any solvents. 2 Quote
Minnesota Steve Posted March 23, 2018 Report Posted March 23, 2018 I dripped something onto my concrete floor. Haven't tried removing yet. But I figure worse case I use a jack hammer and a patch. :-) Quote
drzaius Posted March 23, 2018 Report Posted March 23, 2018 My shop floor has had so much stuff dropped on it that another spill just doesn't even show. Looks like a huge Jackson Pollock painting. 2 Quote
Chestnut Posted March 23, 2018 Report Posted March 23, 2018 Good to hear that it came off easily. Quote
Popular Post Mark J Posted March 24, 2018 Popular Post Report Posted March 24, 2018 Or you could try this, spill out some more ARS and tell your wife you refinished her floor. 3 Quote
mat60 Posted March 24, 2018 Report Posted March 24, 2018 Nice save. Does she need to no what happened.. Quote
Ronn W Posted March 25, 2018 Author Report Posted March 25, 2018 10 hours ago, mat60 said: Nice save. Does she need to no what happened.. You haven't been married long have you?.........Of course she does not need to know. 1 Quote
wdwerker Posted March 25, 2018 Report Posted March 25, 2018 What she doesn't know won't hurt you, unless you can't keep your mouth shut ! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.