Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Michael Fortune #1 Chair Build

Featured Replies

Even though the seat is yet to come, it looks like it would be comfortable to sit in. And mentally comfortable to be enveloped by walnut.

  • Replies 139
  • Views 30k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Well it was a busy summer at work, and in my personal life, but I did get a few things done and just returned from my second week at MASW working on the Michael Fortune #1 chair. To date I have about

  • Well fellow woodworkers this one is a wrap!! After nearly 4 years and over 350 hours my attempt at a Michael Fortune #1 chair is complete. Thanks for all your support and for following along on this l

  • This week I worked on the under side of the arms, crest rail shaping, and also fit the first back slat. Shaping the back of the arm with rasps. First I mark the part with marker and then start sh

Posted Images

  • Author
  • Popular Post
On 11/25/2022 at 4:17 PM, curlyoak said:

Even though the seat is yet to come, it looks like it would be comfortable to sit in. And mentally comfortable to be enveloped by walnut.

To be honest I couldn't wait and set the seat blank on it the other day and tried it out, I think it will be great the curved back slats provide nice lumbar support.

  • 2 years later...
  • Author
  • Popular Post

...well its been a while but time to bring this one across the finish line.

Did some final blending with a rasp

SB137.thumb.jpg.818b65ea212077fe777e218a9f805a06.jpg

And final sanding before finish begins

SB136.thumb.jpg.1a6a56da53b2062351efc2a0352ce5ec.jpg

  • Popular Post

I was going to comment on how neat, I guess you would call it, the arm rest, ties into the front and back legs but then I feel like I would be slighting the beautiful back slats and the seat so I’ll just say the whole darn thing is awesome! Great job! 

  • Author
  • Popular Post

Today I knocked out the seat cushion platform. First I needed a pattern so I grabbed some paper and taped enough sheets together to fit. Then I taped the blank to the chair and used the side of a pencil to get the outline.

SB139.thumb.JPG.0aeddc167f94a17459f3efe5ae6aa92c.JPG

SB140.thumb.JPG.55ae5fecb07b8a30698ae410a746f041.JPG

SB141.thumb.JPG.02485a561c54e1614de1b7f1699bcc09.JPG

Now lets cut it out and see how it looks. I need about an 1/8" gap for the top foam and seat material all the way around so once I got it in there I took a mechanical pencil and used the chair sides to get my 1/8" line on the template.

SB142.thumb.JPG.559100d9b1bd073855df705b6e978598.JPG

SB143.thumb.JPG.dcadcb82c8bf678cdcba6eef0c9471b9.JPG

With the template done I transferred it to the 1/4" Baltic birch seat platform. I also added some lines I will use to route some 3/16" relief cuts into the platform to provide some flex to the BB.

SB144.thumb.JPG.938f4eefc987cdc4ed7eca40ab5c3830.JPG

Since I was using a trim router with no plunge I drilled 3/16" holes at both ends to insert the router bit into. then used a board as a straight edge to cut the slots.

SB145.thumb.JPG.e84660d5d259fce68715378636ffed2f.JPG

SB146.thumb.JPG.70121c0cd1aba8539a4f0e5551477f02.JPG

With that done I cut the shape at the BS and then cleaned it up at the edge sander and give it a test fit. Looks good if I do say so myself :). I need about a 1/8" gap between the platform and the seat all the way around for the foam/fabric.

SB147.thumb.JPG.f941d8ea6051206d46709f4cc245477e.JPG

Finally I drilled holes for T-Nuts to hold the cushion to the chair. I will pound them in once the holes are transferred to the chair. Doing this allows you to remove the cushion with two screws should the need ever arise... for say should your wife decides she wants a different pattern cloth.

SB148.thumb.JPG.1a99d577e8206d35d318fb18a59d312c.JPG

 

 

SB 138.JPG

I would have never thought about the relief cuts. Obviously those are important? 
Good idea on the t-nuts. 

  • Author
  • Popular Post
On 12/30/2024 at 8:07 PM, wtnhighlander said:

The reliefcuts allow air to escape as the cushion is compressed, as well as allowing the seat panel to flex, correct?

Correct. No woppie cushions here :D

...and also helps provide some flex in the seat platform for comfort and the ability to conform to the chair since the seat is not flat.

1/4" plywood seems at first a thin support, but 1/2" (or even 3/8") isn't going to flex much. 

I'm just curious, any idea what the weight limit on a chair like this would be?

  • Author
On 12/31/2024 at 8:50 AM, Mark J said:

1/4" plywood seems at first a thin support, but 1/2" (or even 3/8") isn't going to flex much. 

I'm just curious, any idea what the weight limit on a chair like this would be?

Mark I am absolutely comfortable that if you can fit your rump between the arms the seat will hold you :D

I'm 187 lbs and you could easily double that without issue but I think if you did the arms would be digging into your sides and be uncomfortable.

Turning out nice. My daughter never understood why the slats went down so far. 

  • Author
  • Popular Post

First up today was to drill the holes from the platform through the seat rim in the chair

SB150.thumb.JPG.5233807849b58c5f48c3834eee8be747.JPG

Next I started adding the foam to the platform. First was a layer of 1/4" high density foam applied with 3M 77. FWIW you want to use something ( I used the same construction paper I use in my spray room) under this as it it sticky as heck and gets everywhere.

SB151.thumb.JPG.7cae799b2efaec0f4f42ac6a17a1a022.JPG

SB152.thumb.JPG.c8b717c1bb8d07218e291a05e5a624f3.JPG

Then I trimmed it with a sharp knife

SB153.thumb.JPG.c1654f2ddfaacd9fffac4902944d5d39.JPG

I cut some holes so we don't have a large whoopie cushion as discussed earlier. I used a cutter I have for Kaizen foam just becuase its what I had but as long as you cut a few holes you are good regardless of how you cut them.

SB154.thumb.JPG.b6214a294e67bc633ccefb421422f2b7.JPG

Next up I cut some strips of high density foam at a 45 on the BS, this worked very well.

SB155.thumb.JPG.feba937183276ad2f517592575c25ad6.JPG

I glued them to the edge of the 1/4 foam then cleaned it up with an electric carving knife, again it worked great. It's my understanding that the 45 smooths the transition from the HD foam on the edge to the medium density in the center to insure you do not have an abrupt change that could be felt.

SB156.thumb.JPG.7c9f7ba4854bf39f276f668222c65f1d.JPG

SB157.thumb.JPG.9c02dcff8e9acb6e42c0ac58c09298f8.JPG

Next up I cut the MD foam 3/8" larger on all sides and then glued it in. Starting with the corners and finishing in the center.

SB158.thumb.JPG.e4388ee724f04caca9d4f9ae6abf2e7a.JPG

SB159.thumb.JPG.cd5260b99ae1239718ca67e410043509.JPG

Then using some 100 grit sandpaper I eased the top edge all the way around.

SB160.thumb.JPG.7372a037d2d622e346e55a08f5ffbe82.JPG

The final 1/4" light duty foam covers the whole platform and is glued only to the sides. Then cut with a sharp knife.

SB161.thumb.JPG.abe462869c9c512f1312077cb69b4b11.JPG

SB162.thumb.JPG.0a405a3300860a1526382bb381cac109.JPG

With the foam complete now it was time to add the muslin cover. I cut it oversized about 5" on all sides so I have material to stretch the fabric around the platform.

SB163.thumb.JPG.8bee7b58583a40625a0c2ae659058701.JPG

Here is a shot to show where a staple will need to be pulled and re applied to smooth the side. You can see the material was not pulled tight on the last stapple. I am using 1/4" staples and a pneumatic stapple gun but a hand stapple gun will work as well. FWIW if you need to pull stapples I find a small screwdriver works better than an office stapple puller as they tend to wreck the fabric.

SB164.thumb.JPG.0cfb443b569e791cd0f206429b382e1c.JPG

So not terrible for my first try...

SB165.thumb.JPG.f71032745fdc9b802787e61e86d38ec5.JPG

...but not liking this. I will need to pull the cover and add some foam so the corners look better. If that doesn't work Ill have to remake the platform and start over :( FWIW its just the corner once the upholstery fabric is added the sides will be good.

SB166.thumb.JPG.f5c8cede5499e556c6c4c7817a9c5c27.JPG

While that would be a bummer its only a few hours work and $20 in materials.

Back to the spectator chairs so I can get them out of the spray room and move this in :)

I had an uncle in the uphostelry business, many moons ago. They used a tool like this for adjusting such things:

https://www.hobbylobby.com/art-supplies/painting-canvas-art-surfaces/blank-canvas/fredrix-canvas-pliers/p/6449?gad_source=1&gclid=Cj0KCQiAyc67BhDSARIsAM95QzusTvDQosXW7MD51pdre4G3Z6lvKWAA3iLKrpsooavw4B-I12q8yhcaAoPFEALw_wcB

Dad uses the same sort of tool to stretch his painting canvasses.

The fabric you are showing is probably light enough that these would be of little benefit, but for heavier materials, they can be a life saver.

Thank you for journaling. Something I want to do someday (if it doesn't arise as a household to-do first).

  • Author
  • Popular Post

Ok time to see if I can fix the corner gaps or if I will need to start over...

SB167.thumb.JPG.6623ca00c2240266c8f4411565edc127.JPG

  • Author
  • Popular Post

So after jacking around for about 45 min ....

Here is one of the four corners I worked on. It was nearly impossible to get a good result...at least for me

SB168.thumb.JPG.d6c35a7a593aa4d2a89ddde28e752b8b.JPG

SB169.thumb.JPG.c61123ea20f7ace409bd08e8bd1a362b.JPG

I decided it would be easier, quicker, and a better result to just start over

SB170.thumb.JPG.947d063bc8a3ccffbc007e2e65ee69f8.JPG

So I made a new platform in about 30 min :)

SB171.thumb.JPG.b48c26cde2ea89a3521bc1d6cf9ee2d9.JPG

Next up I will add foam to the new platform.

That sucks. Sometimes you just have to start over as it wastes less time. The chair looks fantastic.

  • Author
  • Popular Post
On 1/8/2025 at 10:25 AM, Chestnut said:

That sucks. Sometimes you just have to start over as it wastes less time. The chair looks fantastic.

I agree it was pretty obvious I could not get the result I wanted so take the time to do it right and toss maybe $20 in material :)

At this point I'm 4 years in on this thing so a couple hours is not a big deal LOL

  • Popular Post
On 12/31/2024 at 5:21 AM, pkinneb said:

No woppie cushions here :D

I was thinking it would be fun to have house guest's sit in a beautiful chair just to have it turn into the most expensive whoopee cushion they had ever seen.

  • 2 weeks later...
  • Author
  • Popular Post

Started working on the final finish prep tonight. Sanding with 120 and 150 grits. When I apply the finish layers I will go to 220 and 320 before final top coats.

SB172.thumb.JPG.bd2a8b8a7fe6f08492018b8358fde188.JPG

  • 2 weeks later...
  • Author
  • Popular Post

The last step before finish was to cut the legs flush. I started by marking them at the TS

SB174.thumb.JPG.c329bbc068616a585c5210314fa56202.JPG

SB173.thumb.JPG.64a84f837ced6494a78af5126376cf51.JPG

Then with the chair in a vise using a pull saw I cut them off

SB175.thumb.JPG.c078d3cc8762b39ee1f774af38bad905.JPG

Finally I grabbed a rasp and added a small chamfer to each one.

SB176.thumb.JPG.a7563dd032acf6d0040e72a3338375f8.JPG

SB177.thumb.JPG.7db9f83f851680b51201e21298ff4dee.JPG

...and with that let the finishing begin...well probably not until Sunday as I have another project in there I am finishing up.

SB178.thumb.JPG.78df00166b5a79c76f22545dee6237e1.JPG

Oh I also cut new foam for the replacement seat at the bandsaw

SB179.thumb.JPG.43b665a04e68ffc01ac7185f43b88e70.JPG

  • Author
  • Popular Post

Finished the new cushion today. Went form these unsightly gaps 

SB165.thumb.JPG.19a488c5cf2cbfba9c9ee6d60158d5eb.JPG

SB166.thumb.JPG.1b6d25c9cb6c96e034ef2b4ef14aede3.JPG

To this...much better just need to work out a few wrinkles / depressions with some steam. I will add the top layer of pattern fabric once the chair is complete.

SB180.thumb.JPG.550823dea50326eb7cc212bc9d421984.JPG

That's a really nice looking chair Paul. I don't remember if you had posted what the pattern fabric will look like, but I'm sure that it will be impressive.

Very nice! I have yet to take on a chair but find all the chair projects on this forum inspirational.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.