Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's on the bench.

Featured Replies

On 4/10/2025 at 4:42 PM, Von said:

Finally made some shop time today to work on the lid for the urn. Part of the delay was going to the lumber yard and getting some maple to replace the walnut I had been planning on using for the top. Very happy with that choice looking at the result.

It still needs a little fine-tuning, but I'm very happy with the look and fit at the moment. Full disclosure, one corner slipped during the glue up and the box is a little out of square, but I was able to cover that with a little hand tool work. I think it's to the "if you didn't know, you wouldn't" point, at least if you don't have a square in hand. Hoping to get the final tuning and sanding done tomorrow and the first coat of finish on. Going to try an oil of some sort since this shouldn't be a hard-wear piece.

PXL_20250410_204634151.jpg

PXL_20250410_204717310.jpg

Looks very nice, Von!

  • Replies 560
  • Views 260.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • A quick fixture I just made for hanging a hose:

  • Finally got this box tweaked correctly so the flute actually fits in it snuggly ... gotta love the figure in the maple.

  • Chestnut
    Chestnut

    Had a shop visitor. Took her for a tour then tried to distract her with some walnut. She took an instant liking to the LN no. 4. Such good taste.

Posted Images

On 4/10/2025 at 4:42 PM, Von said:

Finally made some shop time today to work on the lid for the urn.

Usually urns are sealed, or at least I think they are. How are you planning on sealing this one shut?

On 4/12/2025 at 2:29 PM, fcschoenthal said:

Usually urns are sealed, or at least I think they are. How are you planning on sealing this one shut?

I'm not. My web researching led me to believe sealing or not is a matter of personal choice but I welcome being educated if I'm mistaken.

I expect at some undetermined point in the future we will scatter the ashes, so I don't want to permanently seal the urn. I thought about gee-dub's trick of capturing the top in the box instead of the bottom and then using the feet to seal the bottom in a reversible way, but wanted to give myself some flexibility for this first time building one of not committing to a top early on.

For additional context, I think this is typical but I don't know, the ashes are currently bagged and in a cardboard box as received from the funeral home. They are sitting on a shelf and the goal of this urn is provide a more aesthetic container until we scatter the ashes. I've sized the urn so that the ashes will fit while still in their current box so if the urn gets knocked over, there won't be a risk of spillage and putting the ashes in the urn is as foolproof as possible.

All that said, I have thought about sealing it and if I was convinced I do need to do so, my thought is I'd use a few dabs of hot glue or hide glue so I can open it non-destructively when the time comes to do so.

Thanks for the question - it's my first time doing this, so please don't assume I've thought of everything.

  • Popular Post
On 4/12/2025 at 6:50 PM, Von said:

I'm not. My web researching led me to believe sealing or not is a matter of personal choice but I welcome being educated if I'm mistaken.

If urns were sealed then several ridiculous sitcom plots would be unrealistic.  Also, in real life people receive their loved ones ashes in urns and then scatter them.  I'd guess that urns should close securely but not permanently.

Reminds me, one of these days I should do something with my father's ashes.  He died in the beginning of COVID and everything was postponed until "later, when the pandemic is over".

  • Popular Post

Sorry, if the ashes are being scattered, then you definitely wouldn't seal it. I guess my thoughts on an urn are one of indefinite internment. My wife and I are being cremated and with ashes mixed are resting in a mausoleum of sorts in a sealed urn. My brother was cremated and laid in a National Cemetery, in an urn, under a headstone. Hence my frame of reference.

I guess like everything else, one does what is right for the circumstances and in their heart.

I wonder what folks typically do with the urn after the ashes are scattered?  

On 4/12/2025 at 8:33 PM, Beechwood Chip said:

Reminds me, one of these days I should do something with my father's ashes.  He died in the beginning of COVID and everything was postponed until "later, when the pandemic is over".

Sorry for your loss. We lost my father and step-father over the past few years and my mom and step-mom seem to want to take their time, so I'll be building a second urn.

On 4/12/2025 at 10:13 PM, fcschoenthal said:

Sorry, if the ashes are being scattered, then you definitely wouldn't seal it. I guess my thoughts on an urn are one of indefinite internment. My wife and I are being cremated and with ashes mixed are resting in a mausoleum of sorts in a sealed urn. My brother was cremated and laid in a National Cemetery, in an urn, under a headstone. Hence my frame of reference.

I guess like everything else, one does what is right for the circumstances and in their heart.

No apology necessary - I appreciate you deepening the discussion. I hesitated asking about the logistics because it seemed awkward. And I'm sorry for the loss of your brother and give kudos on your and your wife's (I hope very advanced) planning, we should do the same.

 

On 4/13/2025 at 9:02 AM, Mark J said:

I wonder what folks typically do with the urn after the ashes are scattered?  

I've pondered that. In my case, I expect I'll offer them as mementos to my mom and step-mom respectively and ultimately may re-use them.  

  • Popular Post

Two coats of Fiddes Hard Oil wax (satin) applied. Second coat was super light. First time I used that finish and am fairly happy with the application and the result.

PXL_20250413_141506029.thumb.jpg.fec43830bbb41ff2757ee4ac3c09781c.jpg

  • Popular Post

Finished the (very) rough scrap wood prototype for my 'barrister' tool cabinets.

Door closed:

IMG_20250413_155154761.thumb.jpg.d2d768badb05701de8b12727d44c13ca.jpg

Door open:

IMG_20250413_155215658.thumb.jpg.d24f1dd0c6c9e8c63306adb28c3ac156.jpg

Tools inside for scale:

IMG_20250413_155242140.thumb.jpg.71c71df36323e45fe3d535ce4a3748de.jpg

I think this door style will be perfect for my space constraints, IF it will operate smoothly. This one has aluminum pins running in a groove cut directly into the wood, and binds easily. I think that will resolve itself if the part containing said groove is harder than this pine, which can barely hold its own against styrofoam.

Another lesson learned from using this material is that 'fancy' joinery is wasted effort. The material is too squishy. Maybe a shallow dado to align the butt joint, with dowels driven through from the outside, would be a better choice.

Sides and door are solid in this version, for speed and simplicity, but a hardwood frame with a thin hardboard panel glued in, would keed the weight down, and possibly be stronger than the pine.

FYI, this prototype's parts will serve as templates, so it has only a few screws keeping it together.

IMG_20250413_155309854.jpg

  • Popular Post

@wtnhighlander - That is such a cool idea for a storage cabinet.  Just because I have been a nerd since the early 80s I scrounged one of these old computer tape cabinets that works pretty much the same way.

NewTackleBoxCubbies(4).jpg.083929548052b593f637efaee55db61d.jpg

BlueCabinetRetrofit(4).jpg.db3a740603327aae05b750a509fe85a4.jpg

It has worked very well for me for a long time.  Same sort of lawyer-bookcase drawer mechanism.  I've been glad I had them.

@wtnhighlander, what kind of wood will the final assembly be made of?

I built the Woodwhisperer’s Guilds Barrister Bookcase several years ago and the pins in the door sides that ride in the case grooves were 3/8” hardwood dowels ( walnut in my case) and work very smoothly.

  • Popular Post
On 4/13/2025 at 5:44 PM, gee-dub said:

Just because I have been a nerd since the early 80s I scrounged one of these old computer tape cabinets that works pretty much the same way.

If you were to now show how you are using the write-protect rings from the tapes in some way in your shop, I'll create some sort of award for you :-)

  • Popular Post

I started going through some scrap wood yesterday trying to make room for the 25 bd ft of maple I bought last weekend. It will go towards a built-in cabinet I'm going to start making soon.

The wood is all piled on top of my table saw/workbench and somehow my lathe got pulled out. I started turning a handle for a coffee scoop kit I bought in December. Had to stop and order a live center cone. Going to try and get everything made this weekend to be ahead for Mother's Day gifts.

  • Popular Post

A quick follow up on the urn: my mother really appreciated it. She's placed the urn in a prominent place in her living room with a photo next to it. I admit I was hesitant to take on this project given the gravity, but am so glad I did and write this to encourage anyone else in a similar situation.

  • Popular Post

@Von - I understand the hesitation and experience it almost anytime I make an urn.  I only do them for friends and family and of course, gift them.  There have been times that others on the forums have helped out with engravings or laser work which makes the urns extra special.  I always feel a little awkward for some reason but the urns are always appreciated.

  • 2 months later...
  • Popular Post

Gearing up for the next project, which involves some half blinds. Starting to get the hang of it, but they're drastically different than through dovetails. IMG_20250628_182951814.thumb.jpg.a4656a3c3d3904d5e551660937a595e3.jpg

  • 1 year later...
  • Author
  • Popular Post

I really should just do a stand alone Journal but now is not the time. Been working on removing the carpet from our living dining room and also replacing the rail newel posts and sindles with something a bit more my design.

0703262008.thumb.jpg.91c6ed2e3025efb6eb86d03bd96f2daf.jpg33 spindles, 15 feet of handrail and 3 newel posts.

0628261514.thumb.jpg.922b73da4b27c776657631bdec2320f3.jpg

I couldn't find a commercial connection i liked so i designed my own. I'll thread the newe post screw in the threaded rod and use a nut and washer to hold the handrail on.

The best part of this project was buying a new tablesaw. I wanted a saw to have in the garage so i can work while kids sleep. I stumbled upon a 1947 Delta Unisaw with a 1hp single phase motor. Bought it for $200!!!!

0703262008_HDR.thumb.jpg.ddf321616128ae0d9d0ace802eb7f4ae.jpg

Chestnut!  It's great to here from you.

I know nothing about building a stair railing.  Maybe you could explain the newel post -- railing connection a little more?

  • 3 weeks later...
  • Popular Post

My buddy that helped me build the current shop brought down an inherited Craftsman 506.51880 vise that needed some love. This is the same guy that I built a new top for his dad's old workbench a while back.
Dans-workbench-20260223.thumb.jpg.317c11d43b229aa2384912a2bd128190.jpg
The vise wasn't in too bad of shape. I believe he got it from his brother in Virginia. We Evapo-rust'd it, brass wire wheeled it, and lubed it. Made new chops and a new handle for it. Built a spacer plate to align it with the top of the rebuilt bench.
Dan-Cman-506-51880(3).thumb.jpg.d3738b12d713202a8dd59bb7372f7381.jpg

Dan-Cman-506-51880(2).thumb.jpg.388926b76c34c5b7c5ae7beecaa51454.jpg

Dan-Cman-506-51880(1).thumb.jpg.0c7716341147e57322ee3c0d84c83005.jpg
He is not a woodworker and he's happy so I'm happy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.