Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

BenchCrafted Shaker Style Workbench

Featured Replies

As most of y'all know, I have been back and forth on my material choices for my Shaker style bench. For a while I wanted to use only solid wood construction. Then the more I thought about it, and looking at how much thought and effort was put into the plans by BC I have decided to follow the plans. Instead of using ply, I will use solid wood for the back.

I have finally started! Any and all feedback/advice is welcomed! And I will answer any questions about the process.

Here are some in progress pics.

eba2uzyq.jpg

u6ydyjan.jpg

u9ureje4.jpg

a9a3amaq.jpg

y3e6eqag.jpg

  • Replies 333
  • Views 51.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I don't always wear helmets, but when I do, I'm making super accurate precise miter cuts.

  • I am really pleased with the quality of the ply. Although I have nothing to compare it against I will not hesitate to use this product on future builds that will be painted. I am planning some shop c

  • Maybe this one gives my idea away.

Posted Images

Looking good so far . if you palan on finishing the inside you might think about doing it now ,  I prefinish my sheet before I cut them , it makes life easy .

  • Author

I didn't even think about finishing the inside. :)

Hmmm... Lol

  • Author

Thanks everyone. It really feels good to start this workbench. I want to have the carcass done before the new year. Get the top done shortly after.

Good on ya Mel!  Glad to see it in the works!

  • Author

Interested to see how it turns out.

 

Just like the BC one :) Well, hopefully. 

  • Author

BC one?

Bench Crafted. I bought the vises and plans from those guys. Top notch stuff!

  • Author

Update... I had to run out and buy the correct screws as recommended by BC.

Here's some progress...

 

I decided to make this little spacer to make sure I had the screws in line with the boards. I erred on the side of the bottom, to avoid making any error visible.

e3y3ajyj.jpg

 

 

Sided attached!

ybazadyj.jpg

 

 

90 degree clamp, love this thing!

7esedery.jpg

 

 

Dividers installed!

ta4yjeba.jpg

  • Author

Thanks! It's going really nicely! I wish I bought my faceframe stock the other day. But snow hit, and that plan dissipated!

Great start but I have a question...

 

 

when did snow ever stop someone from Wisconsin ;)

 

I'll keep watching to see the love and craftsmanship flow into this beastie.

  • Author

Hmmm... Fair point Tony!

 

I have decided (with a little guidance) to use pine for the face frame. May as well, as I'm painting it, and I don't really care if it gets dinged up. Lucky me, I have pine in my shop. I'll get started with that either tomorrow (unlikely) or Thursday after work. I do plan on getting the bottom supports installed tomorrow. The plan didn't do a great job of point this out. It is in the 3d drawing that is available on the site though.

Boy, you're a man of extremes...walnut and padauk one day to painted pine the next. :)

  • Author

Boy, you're a man of extremes...walnut and padauk one day to painted pine the next. :)

 

Funny thing... I was going to make it out of hardwood, and then I was looking over the plans and I realized how much time and effort went into making them so nice. It was then, that I realized that I should make it per the plans that BS made. We'll see how it turns out, but I am hopeful! The base is already pretty rigid! 

Finally!!! I think you made the right choice Mel. Looking forward to following the build. 

  • Author

Finally!!! I think you made the right choice Mel. Looking forward to following the build.

Thanks bud! It does feel good to have this started!

Hmmm... Fair point Tony!

 

I have decided (with a little guidance) to use pine for the face frame. May as well, as I'm painting it, and I don't really care if it gets dinged up. Lucky me, I have pine in my shop. I'll get started with that either tomorrow (unlikely) or Thursday after work. I do plan on getting the bottom supports installed tomorrow. The plan didn't do a great job of point this out. It is in the 3d drawing that is available on the site though.

Pine is good for this purpose, strong and cheap. If I am not mistaken, the plywood looks like its pine plywood, possibly from Home Depot at around $38 a sheet. Not a bad value for what it is.

 

Welcome to the world of woodworking with plywood! It has its place :-)

 

BTW - what were the special screws?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.