Pwalter5110 Posted April 8, 2014 Report Posted April 8, 2014 I don't post all that much, but I read a lot on here. It seems like PB hasn't posted in a while and I just noticed. I hope he is doing alright. Quote
..Kev Posted April 8, 2014 Report Posted April 8, 2014 I did a little checking around earlier and talked to a few folks but, didn't come up with any answers. Like you, I hope all is well with PB 1 Quote
wtnhighlander Posted April 8, 2014 Report Posted April 8, 2014 Amen. His absence is easily noticed. It has been about 2 weeks since he last posted here. Hope all is well with him. 1 Quote
Dave H Posted April 8, 2014 Report Posted April 8, 2014 I think I remember his daughter was expecting a while back, that could be the cause for the deafening silence. Quote
CessnaPilotBarry Posted April 8, 2014 Report Posted April 8, 2014 I also remember he's been bringing some green guys up to speed in his shop. Here's hoping he's just busy! Quote
Tpt life Posted April 8, 2014 Report Posted April 8, 2014 I tried PM and other contact two weeks ago. Glad other people also noticed. Also hoping he's ok. Quote
Llama Posted April 8, 2014 Report Posted April 8, 2014 Also been thinking about this. Hope he is ok Quote
Guest Posted April 8, 2014 Report Posted April 8, 2014 +6 on that. Seems he has a lot going on... new shop, new grandchild, new employees, new E-class and some health issues so hopefully he is just taking a break on a beach somewhere. Quote
Eric. Posted April 8, 2014 Report Posted April 8, 2014 He's probably lounging on some Caribbean beach paradise in a man thong, sipping daiquiris and reading some novel with Fabio on the cover. He's disappeared for weeks at a time before. My guess is the new grandbaby... 1 Quote
pghmyn Posted April 8, 2014 Report Posted April 8, 2014 He's probably lounging on some Caribbean beach paradise in a man thong, sipping daiquiris and reading some novel with Fabio on the cover. He's disappeared for weeks at a time before. My guess is the new grandbaby... He came off as more of a cosmopolitan drinker, to me. Quote
Boatworks Today Posted April 9, 2014 Report Posted April 9, 2014 My guess is either a good single malt, or bourbon.. I suppose door #3 could be tea ? Either way hope all is well ! Quote
DaveT Posted April 9, 2014 Report Posted April 9, 2014 With all that going on in his life I wouldn't be surprised if he is taking a break somewhere. Here's hoping that's what it is and he returns refreshed and invigorated. Quote
Popular Post CT Proctor Posted April 9, 2014 Popular Post Report Posted April 9, 2014 Maybe he's looking for his teeth in the DC again. 4 Quote
Trip Posted April 9, 2014 Report Posted April 9, 2014 ==>Maybe he's looking for his teeth in the DC again You know, that really was one of the funnest posts ever... The very definition of 'you just can't make this stuff up'... Quote
Llama Posted April 9, 2014 Report Posted April 9, 2014 If someone starts a thread about Shapers he may come back. Just an idea 1 Quote
pghmyn Posted April 9, 2014 Report Posted April 9, 2014 If someone starts a thread about Shapers he may come back. Just an idea No, it has to be anti-shapers. His sixth sense will tingle. Quote
Popular Post Trip Posted April 9, 2014 Popular Post Report Posted April 9, 2014 You know, now that you mention it, I was just shopping at Home Depot and saw this amazing Ryobi bench-top router table. I'm thinking shapers are way over-rated... I should just ditch my plans for the 3HP PM shaper and go with a router table... I'm sure it's going to work just as well. Any input? http://www.homedepot.com/p/Ryobi-32-in-x-16-in-Universal-Router-Table-A25RT02/100593231 6 Quote
pghmyn Posted April 9, 2014 Report Posted April 9, 2014 You know, now that you mention it, I was just shopping at Home Depot and saw this amazing Ryobi bench-top router table. I'm thinking shapers are way over-rated... I should just ditch my plans for the 3HP PM shaper and go with a router table... I'm sure it's going to work just as well. Any input? http://www.homedepot.com/p/Ryobi-32-in-x-16-in-Universal-Router-Table-A25RT02/100593231 Are you going to raise panels with it? Sounds like a great deal! 1 Quote
Beechwood Chip Posted April 9, 2014 Report Posted April 9, 2014 I'd like to add a power feed to my home made router table. Anyone know where I can find plans? 2 Quote
Dan S Posted April 9, 2014 Report Posted April 9, 2014 No, it has to be anti-shapers. His sixth sense will tingle. No, you just need to suggest that Routers aren't dangerous when used properly, or that everything from china isn't chunk. 1 Quote
pghmyn Posted April 9, 2014 Report Posted April 9, 2014 I don't think he's going to talk to us anymore, after this thread. Quote
Tpt life Posted April 9, 2014 Report Posted April 9, 2014 Maybe he sucked a toupeé off of the wrong man... Quote
Freddie Posted April 9, 2014 Report Posted April 9, 2014 Im going to spray an entire kitchen set with latex paint through an airbrush. Has anyone tried this? Quote
..Kev Posted April 9, 2014 Report Posted April 9, 2014 I hired some young kids off the street to help in the shop that turned out to be really good woodworkers! They always put stuff away, don't make a mess, and haven't broken anything.. Quote
Janello Posted April 10, 2014 Report Posted April 10, 2014 I mounted a 5 HP lawnmower engine under my jesssem router table. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.