Popular Post G S Haydon Posted June 13, 2015 Popular Post Report Posted June 13, 2015 Thought you might find this high speed build fun to watch 3 Quote
wdwerker Posted June 13, 2015 Report Posted June 13, 2015 Great video ! Almost exhausting to watch , that had to be a great upper body workout ! Sign it and date it , someday it might be a treasured piece made by a distant relative. Quote
..Kev Posted June 13, 2015 Report Posted June 13, 2015 Great stuff as usual Graham! Fun to watch! Quote
Eric. Posted June 13, 2015 Report Posted June 13, 2015 Good stuff, Graham. Never would have pegged you as a dozuki man. Quote
G S Haydon Posted June 13, 2015 Author Report Posted June 13, 2015 Dozukis are awesome Eric! That guy is super cool, one day, one day....... Thanks for the feedback chaps! Quote
sjeff70 Posted June 13, 2015 Report Posted June 13, 2015 Is it typical for boards to move when secured under an iron holdfast? I noticed significant movement when Graham was notching out the mortises for the handle. I'd consider building a basic Roubo with no vises, using strictly horizontal and vertical holdfasts. And as always I'm impressed and amazed at Graham's skill with hand tools. Quote
wtnhighlander Posted June 13, 2015 Report Posted June 13, 2015 Nicholson, not Roubo, but a good example of work holding without vices: Mike Siemsen, Workholding on Viseless Bench: https://youtu.be/yvhn-PAfEW4 Sorry for the hijack, Graham! Quote
Tom Cancelleri Posted June 13, 2015 Report Posted June 13, 2015 I wish I could chisel that fast. 3x chiseling would be awesome! Fun video Graham, thanks for sharing. Quote
sjeff70 Posted June 13, 2015 Report Posted June 13, 2015 Nicholson, not Roubo, but a good example of work holding without vices: Mike Siemsen, Workholding on Viseless Bench: https://youtu.be/yvhn-PAfEW4 Sorry for the hijack, Graham! No, sorry that's my fault. Somebody posted a pic of a stripped down original Roubo in a thread I can't find now. The poster didn't want to build what has become a mainstream Roubo with expensive BC hardware. Sorry Graham! Quote
G S Haydon Posted June 13, 2015 Author Report Posted June 13, 2015 sjeff70, I have a tactic for dealing with the slip you saw and yes a holdfast, in my experience, is not an end to workholding woes without a bit of help. 1 Quote
Brendon_t Posted June 13, 2015 Report Posted June 13, 2015 Graham is an animal. I shall call him. . Grahaminal Quote
Jim DaddyO Posted June 13, 2015 Report Posted June 13, 2015 Already saw that one, on account of I subscribe to your You Tube channel. I found it very entertaining and liked it a lot. 1 Quote
G S Haydon Posted June 13, 2015 Author Report Posted June 13, 2015 Grahaminal - Love it Thanks Jim, there is a support group for those foolish enough to subscribe :-) 1 Quote
rodger. Posted June 14, 2015 Report Posted June 14, 2015 Cool video - the 3x chisel work sounds like an impact gun! 2 Quote
Coop Posted June 14, 2015 Report Posted June 14, 2015 Graham, your videos are getting as good as your woodworking! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.