Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

TV / Game Cabinet

Featured Replies

  • Popular Post

A while back, my wife asked for a cabinet to replace the cheap open bookshelf that currently holds my son's game console, games, and TV. Over the winter, I did the design work in sketchup. Now that it is warming up, I'm finally getting started making sawdust.

Fair warning - due to my work schedule, this is likely to progress even slower than Eric's blanket chest. And probably won't look nearly as nice!

First photo, rough length cuts for several of the case parts. The case will be painted, so I'm taking the opportunity to use up some pine shelving boards that are eating up storage space.

6abdc0bcf0fab9c848620a1e5bb4eac3.jpg

Next, I rip a bunch of thinner pieces to form rails and stiles for Shaker panels.

f265bbdd07862f3ee54852864c3d594f.jpg

For some reason, I decided to check for consistent thickness of all the parts. I guess I was worried, because I didn't plane these boards. I discoveted that one board was closer to 5/8" than to 3/4"! That's what I get for using S4S material. The pieces marked with an X had to be re-cut.

29b9961acb73b258271cb9763926d3a3.jpg

So, the next step is to make grooves in several parts, to eventually house panels. My dado stack is an inexpensive Craftsman 6", without carbide teeth. I rarely use it, but for this soft pine, I thought I'd give it a whirl.

2b4214d65ed4150cd0ce2aeb1e4a926e.jpg

The dadoes came out pretty well, at least those I have completed so far.

bd81c5437ba8661f0a506f1be9f40724.jpg

Total time in the shop is about 2 hours so far.

Speed demon Shaneymack, I am not.

  • Replies 212
  • Views 29.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • wtnhighlander
    wtnhighlander

    Finito. I'm not terribly pleased with the paint job, but its time to bring this one to a close. Five months is a bit long for a simple cabinet. Lessons learned:

  • wtnhighlander
    wtnhighlander

    Got all the door rails and stiles cut to rough length, and made one pass on the saw, cutting grooves for panels, before my 'go make a living' timer went off. I used pinch sticks to get the stile len

  • wtnhighlander
    wtnhighlander

    I'll look in to those Blum hinges. Meanwhile, I got the last door panels fitted, and started sanding the parts prior to glue up. You can see how much discoloration is lost from just a brief sandi

Posted Images

Nice! This will be a good one to follow. Paint? What's that?

No hurry Ross. We'll only be checking in every couple of hours to see your progress.;)

For only two hours I think you've done very well! I'd still be looking for my blue tape!

Awesome Ross. I will enjoy watching this. Always enjoy your journals!

Sent from my SM-N910W8 using Tapatalk

    Don't confuse Kev!  He's just getting back into the swing of things!

Would like to see your sketch up diagram if you would like to post it.  Helps keep a visual as i follow along!

  • Author

SIDEBAR: I recently obtained a new Sony ActionCam, and have been playing with it in the shop. This clip shows my setup for cutting all those grooves.

The camera performed well, even in my poorly illuminated garage.

I tried to film myself finessing the fit, but some old guy kept blocking the shot...

Nice! I like your setup feather boards are really nice accessories to have.

Have you thought about making your push stick smaller so you don't have to stop your cut to grab it? I made mine small enough that i can hold it in my right hand to switch quickly.

Ross on video in the shop, who'd of ever thunk it ;)

Nice job!

  • Author
Nice! I like your setup feather boards are really nice accessories to have.

Have you thought about making your push stick smaller so you don't have to stop your cut to grab it? I made mine small enough that i can hold it in my right hand to switch quickly.

Good idea. Mine is just a chunk of 2x4 with a door shim screwed onto the back for a 'heel'.

Cool Ross! I hope this means more video content form you in the future. 

Thanks, Shane. Just screwing around for now, but it adds another aspect of interest to the hobby.

Ross on video in the shop, who'd of ever thunk it [emoji6]

Nice job!

Who, me??? Naaahhh, I'm pretty sure that's Grandpa's ghost - I'm waaaay younger than that old dude in the video! ?

Nice. What is the large metal object behind you in the 2nd video? I've never seen a tool like that before...

  • Author
Nice. What is the large metal object behind you in the 2nd video? I've never seen a tool like that before...

Every shop needs a lumber transport device, right?

Managed a few minutes before work, so I used the dado stack to mill tenons on some parts that need them.

c7f503ea9ee6afe1fea924734beb9a46.jpg

This shop-made jig works pretty well. The dado is still set up as it was for making grooves, I only adjusted the fence.

Here is a good reason for surfacing your own stock.

The fit I wanted:

c5d12f028043dcaa54a5964b303c5bc1.jpg

Compared with the fit I got with some pieces:

1d8c13b670b00ecf9bb520d44a65d57e.jpg

S4S is like a box of chocolates, you never know what you're gonna get. There was enough variation in my stock's thickness that I have to do a fair amount of hand tool finessing now ...

Really enjoying getting tag along for the build.  The videos are great fun.  Thanks for taking the time to take us all along for the ride.

I get burned but the S3S that i buy. When ever i do some thing where alignment is key and I'm too lazy to plane everything down i just make sure to use the show face as the reference surface.

I'm building a project with joints similar to yours and use a Tongue and Groove cutter in my router.

  • Author
10 hours ago, TerryMcK said:

Great work so far Ross. I like the action shots with the Sony.

This one is just for you, Terry!

 

 

4 hours ago, Chestnut said:

I get burned but the S3S that i buy. When ever i do some thing where alignment is key and I'm too lazy to plane everything down i just make sure to use the show face as the reference surface.

I'm building a project with joints similar to yours and use a Tongue and Groove cutter in my router.

I wish I had a cutter set for my router table.  As it is, I'm about to break out the miter saw to make some length cuts, so I don't have to disturb the dado stack setup.  There are a few more tenons to cut after I trim some parts to final length.

5 minutes ago, wtnhighlander said:

I wish I had a cutter set for my router table.  As it is, I'm about to break out the miter saw to make some length cuts, so I don't have to disturb the dado stack setup.  There are a few more tenons to cut after I trim some parts to final length.

I cheat as well i have 2 router tables set up now one in my table saw wing one in my assembly table. I put the groove cutter in the assembly table and the tongue cutter in the table saw wing using the miter gauge as a coping sled. I can leave both set up while still ripping and cross cutting stock. The router bit quality is inferior to that of a dado stack though just keep that in mind. Tear out on the groove cutter is a huge problem.

2 hours ago, wtnhighlander said:

This one is just for you, Terry!

 

 

LOL smokin.

that gives a piece of lumber eye view of what it looks like going through the blade.

Another Ron Howard, you are! Producer and actor! Pretty darn cool Ross!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.