Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Thursday night project...

Featured Replies

  • Popular Post

So last time I was in the shop working on the tool chest (I think it was tuesday) the wife comes into the shop and asks me to make a 24" x 36" picture frame for our youngest childs first bday this Saturday. I was like nooooo way josé. Not enough time and i need the backer board and i need to get glass cut, blah, blah blah. I don't do well with stopping one project to do another one. When I was doing the maloof rocker I had to stop amd make the kids a dress up station. Well this time I put my foot down ! Not a chance woman !!

For all you married guys out there you know how this turned out. Angry wife, terrible life. Needless to say, tonight after dinner i got to work on the frame [emoji1]

I found an old lonely cherry board up on the shelf that was a leftover from a silverware chest i did about 10 years ago for a friends mom. I wanted continuos grain so it needed to be about 12 feet long. I brought it down and marked out my pieces

111292e2a31b0e0a74f66754613704a6.jpg

Rough cut

178ca2be2eefbd645692aacb28e13a93.jpg

Milled them up and put them back in sequence to mark out the pieces and label each corner

6d7864d5e2ed91a69fbd23b7357bb19d.jpg

I bought an acid free backer board and a piece of glass today on my way home from work. I cut the backer board just a smidge smaller than the glass

507b8ce2cbfb5e4b9822d851848c8bc3.jpg

Placed my pieces down as they will be in the frame and marked the edge that will be rabbetted with a sharpie to be sure I don't screw up

5d09f3b8de0adee7243f9a2955e37e3e.jpg

c336fadaad90cd7e2623ba41182fd01c.jpg

I marked on the end grain the size of the groove i need to set my blade height and fence. 1/4" x 1/2"

4de5981a9bfa2f5b1b904cfbe43baa89.jpg

I ran the boards twice with the standard blade to remove the waste instead of switching to the dado blade.

afa2491ffbbd272ea37f0c15ec1bdae0.jpg

Put a chamfering bit on the router table and made a chamfer on the outside corner and a smaller one on the inside corner.

3d786c9197d2828f02d2b70d87b5bfc5.jpg

0a3f86c50bac39464c4fd7d7a9d573f0.jpg

Next i cut all the miters at the chop saw. I dialed them all in to sweet perfection on the mitre shooting board. Nothing beats that- not even the kapex. Ya i said it.

7e5b4b311a8ad3c960d1d0c3fcadcaf9.jpg

Tight joint

28fba4a24efe9e4c7d92ecc467da9a3b.jpg

Next i dominoed all the corners with some 6x40's

fb4025cc23c49701f4e174efb5e95d37.jpg

Put the dominos in amd tested the fit

37902733f456fb524977e3277e30e9f6.jpg

963055b20098a8d04691e2f4f5e499da.jpg

Removed all the machine marks with the smoother. Sweet glass finish !

2ed900e26e03abee23f2a34b04308117.jpg

8a3a71b39d7d84fde0fc56636eb60927.jpg

Glue up

1592d4cf6a4461851f28830b0bff3030.jpg

Square as square can be

715193277c0ba71999dc92f5564ed5bf.jpg

This is the first time im trying Lee Valleys brand of glue. It has a decent open time up to twenty minutes. Its much more liquid than titebond 2. I like it. We will see how it holds up !

cd5aadc68a449a4347b2739f75ee41b1.jpg

Little clean up tomorrow and a couple coats of finish and i will mount the poster that my wife made for our son.

Bed time !

Sent from my SM-N910W8 using Tapatalk

Great progress!  Is that Cherry rubbing off or are you bleeding again?  Also, I thought your blood was green! ;)

 

Shouldn't you be using millimeters? :blink:

 

Nice work! I bought a limited edition art thing a couple of years ago, and it's still in the damn tube. :ph34r:

  • Popular Post
22 hours ago, TIODS said:

are you bleeding again?

I think Shane maybe tried to slit his wrist so he wouldn't have to do this project for his wife. :o

1 minute ago, Chet K. said:

I think Shane maybe tried to slit his wrist so he would have to do this project for his wife. :o

Or try the new glue on a project requested by the wife..

  • Author

Hahah ! You guys are crazy ! Yes i cut myself when i was up on the ladder trying to get the bottom board out of the pile. Pulling and tugging and cussing and then i noticed blood everywhere. Cut it pretty bad. Finally got the bleeding to stop but when i used my hand as a dead blow for squaring up the frame during glue up i noticed the blood squirting out onto my project. Every good project needs blood. 

Looks good Shane. With that much blood spilled on this rush project, the wife owes you big time!  

     With all that DNA on the frame, there's no need to sign and date it!

You got some long ass fingers yo.  I bet you're one hell of a booger picker.

  • Author

You got some long ass fingers yo.  I bet you're one hell of a booger picker.

At 6' 3" everything is long on me. And yes, I can pick one helluva booger!!

Sent from my SM-N910W8 using Tapatalk

9 hours ago, shaneymack said:

Every good project needs blood. 

It's my most frequently used stain... Works really well for tinting sapwood on cherry.

 

  • Author
 

 

At 6' 3" everything is long on me....

There are soooooo many ways that statement can go wrong....

I speak the truth Ross. Nothing but the truth...[emoji6]

Sent from my SM-N910W8 using Tapatalk

6 minutes ago, shaneymack said:

I speak the truth Ross. Nothing but the truth...emoji6.png

Sent from my SM-N910W8 using Tapatalk

I would assume that would mean your stories and tales too ;)

 

  • Author
I speak the truth Ross. Nothing but the truth...[emoji6]

Sent from my SM-N910W8 using Tapatalk

I would assume that would mean your stories and tales too [emoji6]

 

Hah! You know me well Kev !

Sent from my SM-N910W8 using Tapatalk

45 minutes ago, TIODS said:

I would assume that would mean your stories and tail too ;)

 

Ficksed!!! 

There you go Eric, you don't need a branding iron.  You need a rubber stamp and some bodily fluids.  It'll be the next big thing.

20 hours ago, shaneymack said:

 

 

At 6' 3" everything is long on me. And yes, I can pick one helluva booger!!

 

Sent from my SM-N910W8 using Tapatalk

I dont even...

:lol:

 

22 hours ago, bleedinblue said:

There you go Eric, you don't need a branding iron.  You need a rubber stamp and some bodily fluids.  It'll be the next big thing.

I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet?

 

-Ace- 

3 minutes ago, AceHoleInOne said:

I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet?

 

-Ace- 

:lol: I see what you did there.  Very funny.

I put the logo in the hands of two graphic designer buddies of mine.  They are good at what they do and I expect one of them will churn out something pleasing to my eye.  Whether or not they complete the mission during this decade is the bigger question.

  • Author
I'm sure Eric WOULDN'T bother with a rubber stamp. For starters, I bet he would miss that small target entirely. I think he goes straight to the project, making his deposit directly onto wood. Speaking of which, hey Eric...have you cum up with a name for your Woodworking branding iron yet?

 

-Ace- 

[emoji38]I see what you did there.  Very funny.

I put the logo in the hands of two graphic designer buddies of mine.  They are good at what they do and I expect one of them will churn out something pleasing to my eye.  Whether or not they complete the mission during this decade is the bigger question.

Porbably right around the same time the basement is finished

Sent from my SM-N910W8 using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.