Recommended Posts

Posted

Thanks gang!

49 minutes ago, mat60 said:

Nice work and I hope the bug didnt flop around much.

That bug never moved at all. In fact I think it may have died of "natural causes" before it touched down. Or it could have been the acetone in the air.

36 minutes ago, shaneymack said:

As usual Dave, beautiful work. Is this a similar design to the last one? What sheen is that lacquer 40°?

Sent from my SM-N910W8 using Tapatalk

Exact same design as the last one...and the other two before...

I seem to be having this problem for the last 18 months where I make something and someone says "Ohh!, Nice!", and the next thing I know I'm out in the shop making a duplicate.

I need to move on to doing "one-offs" again. That way each project is a new learning experience, instead of me making my usual mistakes on the same ol' techniques. ;)

I had to look on the Data Sheet for the sheen question. I asked for gloss and the guy asked if semi-gloss was alright. The can actually says "Medium Rubbed Effect". They have Gloss, Bright, Medium, and Dull. The Data Sheet says the Medium is 34-38 units (measured on a black background) whatever that means. I buffed/polished the finish to an automotive level of smoothness with Mirka Abranet pads and buffing wheels.

  • Like 1
Posted
Thanks gang!

Exact same design as the last one...and the other two before...

I seem to be having this problem for the last 18 months where I make something and someone says "Ohh!, Nice!", and the next thing I know I'm out in the shop making a duplicate.

I need to move on to doing "one-offs" again. That way each project is a new learning experience, instead of me making my usual mistakes on the same ol' techniques.

I had to look on the Data Sheet for the sheen question. I asked for gloss and the guy asked if semi-gloss was alright. The can actually says "Medium Rubbed Effect". They have Gloss, Bright, Medium, and Dull. The Data Sheet says the Medium is 34-38 units (measured on a black background) whatever that means. I buffed/polished the finish to an automotive level of smoothness with Mirka Abranet pads and buffing wheels.

Interesting. There are all sorts of sheen ratings amongst different manufacturers. Doesn't seem to be much standardization. I use Becker Acroma and they rate sheen by degrees. Some other compaines use percentage and some use matte, semi-gloss, gloss etc. Its all too confusing for me.

Sent from my SM-N910W8 using Tapatalk

Posted
29 minutes ago, shaneymack said:

Interesting. There are all sorts of sheen ratings amongst different manufacturers. Doesn't seem to be much standardization. I use Becker Acroma and they rate sheen by degrees. Some other compaines use percentage and some use matte, semi-gloss, gloss etc. Its all too confusing for me.

Sent from my SM-N910W8 using Tapatalk

Yeah, I'm not sure how it compares to other products but Gloss is 85+, Bright 55-59, Med. 34-38, and Dull 17-21, so you can kind of get an idea...

I find the Med. to be pretty darned clear. It rubs out to a high luster, which is something I would only want for certain projects. I think if I sprayed this Medium Rubbed Effect lacquer on a piece of furniture it would be too glossy and I would hit it with a Scotch Brite. The "Hi-Bild" is designed for kitchen and bath cabinets, but I wouldn't think most people would want their cabinets this glossy. That's probably why they didn't have gloss in stock.

  • Like 1
Posted
15 minutes ago, duckkisser said:

very nice looking are you concerned about the lid warping down the road? looks like it might bow outwards

Yeah, the lid could certainly cup with it being made of flat sawed stock. I tried to select the most stable piece I could and I oriented the growth rings so that if it cups the convex side will likely be facing up. That wouldn't be good, but what are ya gonna do? I could have made the lid with breadboards but that would mess with the design. As it is, when the lid moves across the grain in the usual way it will move towards the front of the box without obstruction, which will cause a slight overhang.

Posted
On 6/10/2016 at 6:25 PM, davewyo said:

I seem to be having this problem for the last 18 months where I make something and someone says "Ohh!, Nice!", and the next thing I know I'm out in the shop making a duplicate.

A beautiful box my man.

I make things like boxes and frames in sets.  The setup takes more time than the rest of the effort so I just make a few of many smaller items.  This also eats up random pieces of quality lumber that are sucking up space. Another side benefit is that when the inevitable "I want one too!" or "Do you have something we can give aunt Ginny for her neice's birthday?" I just reach into a storage bin and pull something out.

  • Like 1
Posted
5 minutes ago, gee-dub said:

A beautiful box my man.

I make things like boxes and frames in sets.  The setup takes more time than the rest of the effort so I just make a few of many smaller items.  This also eats up random pieces of quality lumber that are sucking up space. Another side benefit is that when the inevitable "I want one too!" or "Do you have something we can give aunt Ginny for her neice's birthday?" I just reach into a storage bin and pull something out.

That makes really good sense. Marc, Matt, and Shannon were just talking about the same thing with cutting boards on WT313.

I'm working out a new design for the lid right now, so once I hit the production stage I'll think about 2 or 3 boxes. As you say, most of the work on a simple box like this is in the set-up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 65 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined