Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

OF/Work Table

Featured Replies

  • Popular Post

I'm not home yet but, I will be next week and plan to get going on this project.  I'm going to do this journal a bit different for me and try to video the process.  I'll try and drop in the first video later this week but, in the mean time, I thought I'd toss in the Sketchup picture of what's coming..

OL7Mna.jpg

All maple except for the ply cabinets

Lots of storage

CT parking

BC hardware

I'll get the design video up as soon as I can..

  • Replies 319
  • Views 40.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Video's up!  

  • So, here's reality..  Starting to put a little finish on it..  I'll post another video tomorrow.  

  • Well, it was a long day today but, it's in a good place before I take off..  Still quite a bit of work to do but, it's pretty usable! So, that's reality..  Here's where I'm at on the video f

Interesting contraption.  Are you doing a tail vise too or just a leg vise?

  • Author
4 minutes ago, Eric. said:

Interesting contraption.  Are you doing a tail vise too or just a leg vise?

Just a leg vise..  I was going to toss a twin screw on the end but, I have a couple other ideas on that end so, the twin screw is out.

I like multi function workbenches. This is going to be an interesting project, twice if you get it on video.

This looks awesome, Kev. I can't wait to see the videos. You will really up the project journal bar on wto by doing that.

What are all the slots all over the top?

Sent from my SM-N910W8 using Tapatalk

  • Author
  • Popular Post
12 hours ago, Chet K said:

I think you mentioned in the past of getting some holdfasts for this bench.  I used this setup to drill the dog holes in my bench.

Dog Hole Bushing and Bit

Thanks Chet!  Because this is a bit shorter than a bench, I think I'm going to use the DP and do them before I laminate the top.  We'll see how it goes tho ;)

8 hours ago, shaneymack said:

This looks awesome, Kev. I can't wait to see the videos. You will really up the project journal bar on wto by doing that.

What are all the slots all over the top?

Sent from my SM-N910W8 using Tapatalk

Thanks Shane.. Mostly place holders for a tool tray like the Roubo has and some T track for extra clamping options.  Not sure if all that will go in but, I dropped in the reminders just in case.

Getting my popcorn ready for the video journal!!  Plus this concept really intrigues me. 

  • Author
  • Popular Post

Well, I'm not home just yet but, thought I'd toss the video up anyway..  I'll be home on Tuesday and will get going on this.

 

 

Oh this looks awesome!! Can't wait to watch it [emoji106]

Where are you filming the video? Great view there!

  • Author
3 minutes ago, bushwacked said:

Oh this looks awesome!! Can't wait to watch it emoji106.png

Where are you filming the video? Great view there!

Thanks Drew..  It's in the Bay area near Oakland..  Pinole to be exact.

California?  liar!  is too green.  

Have you considered  using one corner as a downdraft Sanding area?  seems like it would be a pretty simple addition. 

  • Author
4 minutes ago, Brendon_t said:

California?  liar!  is too green.  

Have you considered  using one corner as a downdraft Sanding area?  seems like it would be a pretty simple addition. 

It's CA I swear!  It had actually rained the day before I shot that video.  I've been here for 160 days and have seen rain one time.

No, I hadn't considered that to be honest.  It's certainly something to consider.

I feel it would be pretty simple to incorporate.  a few 6" wide maybe 1" deep  troughs with shop made or bought pegboard sitting flush with the surface.  could be a value add.

Kev great video and explanation of the project.  Quick question, depending on the width won't the chop on the leg vise interfere with the storage cabinets? 

  • Author
1 minute ago, Woodenskye said:

Kev great video and explanation of the project.  Quick question, depending on the width won't the chop on the leg vise interfere with the storage cabinets? 

That potential is there..  The chop will be a bit more narrow to account for that.  As well, the cabinet will have a face frame and the drawers will be inset so, that will buy me some room as well.

Thanks!

Great video, Kev. This is super exciting to have the project journal in video ! Its nice to have videos on here from a member of the community and not just some youtube pimp finding the forum and using it as part of their marketing scheme. Thanks for taking the time to do this, Kev, i will following along every step of the way. 

Great job! Taking build video's to a whole new level! 

What will you be using for wood?

Regarding the down draft table suggestion above. I built one into my out feed table but since going to Festool sanders I have not used it. If I ever replace the out feed table it will be gone because I am sick of small parts (typically hardware) falling into it ;)

  • Author
50 minutes ago, pkinneb said:

Great job! Taking build video's to a whole new level! 

What will you be using for wood?

Regarding the down draft table suggestion above. I built one into my out feed table but since going to Festool sanders I have not used it. If I ever replace the out feed table it will be gone because I am sick of small parts (typically hardware) falling into it ;)

Thanks!

Will mostly be maple with the exceptions of the cabinets which will be ply.

I'm having similar thoughts with the down draft idea.  Because I have the CT there as well as a CV drop and the fact that I use mostly FT stuff, I'm just not sure I'd really use a down draft table.  However, It is worth considering.

  • Author
26 minutes ago, Chet K said:

Good video Kev.  Looking forward to watching this come together.  Think you'll have it done before you hit the road again?

Going to be a real stretch!  15 days and there's a holiday in there..  I doubt it will be done but, should only be details left when I come home for Christmas I hope. 

35 minutes ago, TIODS said:

Going to be a real stretch!  15 days and there's a holiday in there..  I doubt it will be done but, should only be details left when I come home for Christmas I hope. 

Where are you going in December? back to SF?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.