Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Desk inspired by Doucette & Wolfe

Featured Replies

  • Popular Post

I am starting several different projects.  I am better off with several projects moving along concurrently.  So, I have been milling lumber for several projects, one of which will be a desk for my son inspired by the  Doucette & Wolfe desk.  D&W desk is made of cherry and tiger maple.  Mine will be mahogany and QS anigre.  I went crazy getting lots of lumber recently, mostly genuine mahogany.  So my next few hundred projects will be made of mahogany!!!

The legs and cross pieces will be regular mahogany and the outside and inner panels will be made of highly figured mahogany.  The drawer fronts and desk top will be QS anigre.  The secondary wood will be poplar.  I also plan to emphasize use of hand tools for this project.

Here is part of my stash of new lumber:

IMG_4781.thumb.jpg.57865497fc7665701cb5202d324016df.jpg

This kind of lumber really exercises your bandsaw and resawing skills.  For the back, sides, and inner panels of the desk, I found a 14" wide piece of highly figure mahogany which I resewed.

For this project, I was lucky enough to get the limited edition Lie Nielsen No. 4 1/2 Bronze hand plane that was delivered just yesterday.  So I put it to use today and I have never used a finer hand plane in my life.  It is a joy to use and the results are amazing.

IMG_4890.thumb.jpg.b63f42d37dbb31754d770f086fbbdc5e.jpg

IMG_4893.thumb.jpg.c2facd2005f67844f15c32fcd345210d.jpg

IMG_4894.thumb.jpg.7b5097f77efb36d6b828d839ed07059e.jpg

The No. 4 1/2 makes quick work of getting all these huge boards ready.  

IMG_4895.thumb.jpg.4709acdb34faaa19989046684bf567c6.jpg

I got a really good workout planing all the mahogany pieces.  The anigre pieces are also ready.  In the past, I have milled the lumber as projects have moved along.  For this batch of projects, I have decided to have all the lumber milled ahead of time.  

The goal for this weekend will be get ALL these pieces to final dimension and glue the top followed by lots and lots of mortise and tenons.

 

 

 

IMG_4891.jpg

IMG_4892.jpg

  • Replies 102
  • Views 28.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • ALL FINISHED! The construction of the drawers were pretty straight forward.  I did hand cut dovetails.  For drawer bottoms, I used solid poplar 1/2 inch thick with flat panel construction.

  • Made good progress on the desk this week.  All major skeleton components are milled and dimensioned and it is starting to resemble a desk.  I have marked all pieces but I am getting a little hesitant

  • Well, the glue could not have gone better.  I did several dry runs to see what sequence would be best.  Despite all the practice, it was nerve racking. i had glued the two side panels to the legs

Posted Images

Crap Wade. I always forget about your wall stash. That a lot of big mahogany there. Looking forward to that

Gonna be awesome.  I love everything D&W.  Good choice.

Just out of curiosity, what was your bf price on that mahogany?  Was it a flitch or just random boards?  And where did you get it?

  • Author
1 hour ago, Lester Burnham said:

Wow, dude. Is that your shop or a shared workspace? I think I might've asked you that once before but I don't remember. If it's yours, you have far too much stock. I can be over anytime to remove some of that so you can have more room for activities. :ph34r:

It is not a shared workspace.  I don't like to share (:P).  Yes, I agree that I have too much lumber.  I realize I have a problem.  The first step in treatment is admitting you have a problem.  Now, I am sure what the next step is.  

On another note, I do need some walnut, cherry, and maple.......

As for space, I really have run out of room.  The reason it got out of control was that I could not just buy so many BF of anything.  A friend owns the lumber company and he exports nearly100% of his lumber to China.  He does not do retail sales.  He sold me mahogany, prime poplar, and wenge but I had to buy bundles of each.  The smallest bundle in stock for each was about 400 BF.

  • Author
1 hour ago, Eric. said:

Gonna be awesome.  I love everything D&W.  Good choice.

Just out of curiosity, what was your bf price on that mahogany?  Was it a flitch or just random boards?  And where did you get it?

I had to go back and look at my invoices.  I bought the lumber from a friend who owns a lumber company that exports the stuff to China.   He is based out of NY but has a factory about 35 miles from where I live.  So, if I can get a truck and carry the lumber out of his facility, he will sell the lumber to me at the prices he charges the Chinese.

He sold me prime figured mahogany 8/4 at $6.50 per BF; wenge 8/4 at $6 per BF, and prime poplar 4/4 at $1.80 per BF.

The 16/4 and 12/4 straight grain mahogany was a huge bundle that was rejected by the buyer (boards were too short and not uniform).  He sold me that at $4 per BF.   Interestingly enough, most of the 12/4 mahogany was actually highly figured. 

Needless to say, I did not turn any of it down.  I do have to look into a bigger shop next or a lumber storage place.

I know you work with lumber and would be interested in your thoughts.

3 minutes ago, wnaziri said:

I know you work with lumber and would be interested in your thoughts.

That's an incredible deal and the next time he has a bundle for that price, give me a call.  LOL  Those are my thoughts.  Hell of a score, dude.

I find genuine mahogany difficult to source...my guy doesn't typically stock it because it moves too slowly.  If you can believe that.  It is significantly more expensive when he does have it, and that's why it doesn't move...because people think African mahogany is mahogany and it's cheaper than genuine...so that's what they buy.

  • Author
10 minutes ago, Eric. said:

That's an incredible deal and the next time he has a bundle for that price, give me a call.  LOL  Those are my thoughts.  Hell of a score, dude.

I find genuine mahogany difficult to source...my guy doesn't typically stock it because it moves too slowly.  If you can believe that.  It is significantly more expensive when he does have it, and that's why it doesn't move...because people think African mahogany is mahogany and it's cheaper than genuine...so that's what they buy.

if you lived closer to me in NC, I would be happy to share a bundle or two.  My friend does not care since he is getting his usual asking price.  

Genuine mahogany is not only beautiful but it is amazing to work with.  After I hand planed the boards last night, the variation in color and shimmer (chatoyance?) is incredible.  I have a couple board of African "mahogany" and I really dislike the stuff.  It is dense, very heavy, and difficult to work with.  The African mahogany is nothing like the genuine mahogany.  

16 minutes ago, wnaziri said:

The African mahogany is nothing like the genuine mahogany.  

Literally.  Because it's not actually mahogany.  Two entirely different families.

Well man, if I ever find myself heading out east, I'm gonna look you up.  I have a decent little stash of genuine...probably enough to build a highboy if I ever wanted to...but that's it.  And it's my favorite wood to work with so I hoard that stuff, which means I hardly ever get to actually use it.  I need more.

15 minutes ago, Tom King said:

I would be headed your way if I wasn't allergic to it.

At least its not pine like me.

30 minutes ago, mat60 said:

At least its not pine like me.

Well if there's one species I wouldn't mind being allergic to...it's pine.

Mahogany does bother me more than any other species, especially when hand sanding...but it's worth it.  I just wear a respirator and suffer through.  Nothing short of a stroke will stop me from using it.

19 minutes ago, Eric. said:

Well if there's one species I wouldn't mind being allergic to...it's pine.

LOL.  Ya, Pine kicks my but and I do what I can to avoid it so it is all good with me.

2 hours ago, wnaziri said:

I will definitelywenge 8/4 at $6 per BF,

 

WHAzt... last time I bought 4/4 wenge, I paid 22 a bf... Holy cow. That is an awesome connection

jealous of your deal! 

 

Cant wait for this project to get going ... the beautiful wood is going to look even better with finish on it! Also sometime in the next year or so I plan on building me a desk too. So I really interested 

  • 2 weeks later...
On 7/22/2017 at 9:41 AM, wnaziri said:

if you lived closer to me in NC, I would be happy to share a bundle or two.  My friend does not care since he is getting his usual asking price.  

 

Where in NC...I go to OBX every summer.  If this offer is open to others besides Eric, I wouldn't mind taking a detour to split a bundle or two with you :)   If all his stuff looks anything like the boards pictured above I'd be happy working with nothing else for the rest of my life.  

Looking forward to following this build...D&W are my heroes.  I assume this is the desk you're building:  http://www.doucetteandwolfefurniture.com/Writing_Desk.html

  • Author
10 hours ago, bgreenb said:

Looking forward to following this build...D&W are my heroes.  I assume this is the desk you're building:  http://www.doucetteandwolfefurniture.com/Writing_Desk.html

Affirmative.  That is the desk.  I love that design.  If my project turns out half as good, I would be pleased.

  • 2 weeks later...
  • Author
  • Popular Post

Made good progress on the desk this week.  All major skeleton components are milled and dimensioned and it is starting to resemble a desk.  I have marked all pieces but I am getting a little hesitant in committing to the fist definitive joinery related cut.  I am afraid that once I commit, I will discover an error.  I am winging this desk so I am praying I don't make a fatal error.  Anyhow, tomorrow I will jump in head first and hopefully it will work out.

Here is the current state of the desk:

 IMG_4939.thumb.jpg.abbedc4a1bf84163a6d4b3c09bd044f8.jpg

I did not appreciate how big the desk really is.  But I suppose it will be useful real estate.

IMG_4940.thumb.jpg.5de107f43e9cc6db8dbf9416cb4ebdc0.jpg

That mahogany will dictate that desk ought to be placed facing out and NOT against a wall.  I have never worked with mahogany this beautiful.  I can only imagine how it will look once I get a coat of finish on it.

IMG_4941.thumb.jpg.c39a743389a8558114facf8cdcc25c3e.jpg

I don't if you can tell but I did not make an effort match these peripheral boards in thickness.  I did not want to waste the figured mahogany by converting it wood chips.  The exterior surface will be flush with the legs.

IMG_4942.thumb.jpg.8adfcbaff1a631f3f96491b49b035439.jpg

 

IMG_4944.thumb.jpg.6a7ced897a6707a5742024a6ba528001.jpg

You can really appreciate the figure mahogany in this pic.

IMG_4943.thumb.jpg.bc8bddc4e0bef4c16ae2d446fde7c30c.jpg

IMG_4947.thumb.jpg.1b494633fd6523942184e6e670e95509.jpg

This is the final rough layout of the face frame of desk.  

I recently did a veneered table where I was so excited about the project that I mistakenly shaped the legs before the joinery.  That made my life miserable.  Fortunately, I did not make the same mistake on this project, so far.  I will be exercising a my OF 1400 router a lot tomorrow for the all the mortises.  

I have no idea were you are going with all those parts layed out like that. But I love that wood and steam punk look of your shop with the dust collector pipes over head.B)

What brand tablesaw has a square throat plate?

Aj

The desk is looking good. One sweet jointer you have.

That is going to one nice piece of furniture. Can't wait to see it with finish on it. I bet the figure will just pop. Nice, very nice! And like the shop too!

 

 

Sent from my iPhone using Tapatalk

  • Author
58 minutes ago, Unknown craftsman said:

I have no idea were you are going with all those parts layed out like that. But I love that wood and steam punk look of your shop with the dust collector pipes over head.B)

What brand tablesaw has a square throat plate?

Aj

AJ, the first set of pics are the desk but upside down.  The last pic is the front of the desk and it shows the drawer layout.

The saw is a Northfield No. 4 (northfieldwoodworking.com), enhanced with a VSC fence and sliding table.  To give you an idea, the tablesaw top is 4 feet by 4+ feet and the blade is 18".

14 minutes ago, mat60 said:

One sweet jointer you have.

Thanks.  That is my favorite tool in the shop on most days.  It is a Northfield 12" HD jointer, something every hobby woodworker needs :P.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.