wdwerker Posted September 16, 2017 Report Posted September 16, 2017 Slight cracks in veneer are normal, especially in figured grain. Look into burn in sticks to fill those cracks. You don't want to just add a single layer of veneer on top of a flawed one, balanced construction is always an odd number of layers. I think your panel came out great ! Quote
Dknapp34 Posted September 16, 2017 Author Report Posted September 16, 2017 Thanks, that's one of the good ones. The cracks on the two that didn't come out as well are a little too big for my liking, but I'll check out burn in sticks. If I do make new ones, I was going to make a whole new panel, not just veneer over the old one. Quote
wdwerker Posted September 16, 2017 Report Posted September 16, 2017 Just thought I would warn you away from a mistake. Too many guys try to take shortcuts. The burn in sticks are melted and spread into the crack. Mohawk makes good ones. Maybe you can find a video on it. I haven't done it in years and would need to read up to refresh myself before I did it again. 1 Quote
Dknapp34 Posted September 16, 2017 Author Report Posted September 16, 2017 I definitely appreciate the advice. This is my first time working with veneer and this stuff is too expensive to screw up! Quote
Popular Post Dknapp34 Posted September 30, 2017 Author Popular Post Report Posted September 30, 2017 Some progress to report. I made two more panels -- for a total of six -- to give me some options. Glad I did, too. I ended up sanding through one veneer and, as I mentioned earlier there was a crack in another one that was driving me nuts. Anyway, I ended up with four acceptable panels, which I glued up into the face frames for the doors. Here they are set up against the main cabinet to get an idea of what it will look like all together (the left panel is upside down; when I glue it all up, the two doors will be book matched): After a little hand plane work to get the face frames and doors flat, I glued up the face frames to the doors: 8 Quote
wdwerker Posted September 30, 2017 Report Posted September 30, 2017 Absolutely beautiful grain & contrast with the frame ! Quote
pkinneb Posted September 30, 2017 Report Posted September 30, 2017 Wow definitely worth getting some new veneer that looks amazing!! Quote
..Kev Posted October 1, 2017 Report Posted October 1, 2017 Awesome! That'll catch the eye for sure! Quote
JosephThomas Posted October 1, 2017 Report Posted October 1, 2017 Very nice panels, I like it. Are the panels pre-finished in those pics above? Quote
Dknapp34 Posted October 1, 2017 Author Report Posted October 1, 2017 9 hours ago, JosephThomas said: Very nice panels, I like it. Are the panels pre-finished in those pics above? Yup. Panels are pre-finished. 1 Quote
rodger. Posted October 1, 2017 Report Posted October 1, 2017 Wow - what a beauty! I love the doors - looks like ripples in a pond. Quote
Popular Post Dknapp34 Posted October 4, 2017 Author Popular Post Report Posted October 4, 2017 One of the things I like about the design of this tool cabinet is that the doors are thick enough that there is a good amount of storage in each door. The plans, however, called for screwing your tools directly to the backside of the door panels. I'm not particularly comfortable with that idea; seems like its just one mistake away from a screw sticking out of the front side of my panels. So I decided to put a layer of 1/2" ply on the inside of the doors to give me some additional thickness to screw into. I also want this cabinet to be as modular and modifiable as possible so I can move things around as my tool collection grows. So rather than glue the ply onto the inside of the door, I just screwed it on. That way, I can just swap out the ply with a new piece if I want to change the configuration around in the future. (I also used some random veneers for the backside of the door panels and they are fugly, so I wanted to cover them up). To create clearance for the rails and stiles, I cut rabbets and a dado in the back of the ply so that it slipped into the door panel: Only got one of the doors done tonight. Here's a view of the inside so far: Doors closed: 6 Quote
pkinneb Posted October 4, 2017 Report Posted October 4, 2017 The inside is nice but damn those doors are amazing!! Quote
Dknapp34 Posted October 4, 2017 Author Report Posted October 4, 2017 Thanks! This project has definitely got me thinking about doing more veneering. There are so many awesome veneers out there and it's so hard and/or expensive to find good figured hardwood. Quote
Popular Post Dknapp34 Posted October 13, 2017 Author Popular Post Report Posted October 13, 2017 I've made some more progress on the inside of the cabinet. First I made racks for my bench and mortise chisels. The holes are stepped and were drilled using forstner bits. The gaps to slide in the chisels were cut on the TS using a sled. The empty space at the bottom is going to be used for my marking gauges, I think: Next, I made hangers for my squares and fret saw, a shaped hanger for my dovetail saw and drilled some dowels for my angle gauge, straightedge and dovetail saddle marker. The hangers for the squares have slots cut in the left side to hold the blade of the square, and a groove at the top into which the square sits: Things left to do on the inside: make a rack for my spokeshaves, which will be hung from the doors at the top middle; make some drawers for the bottom middle; and as I mentioned above, make a rack for my marking gauges. Behind the doors in the middle I think I will put things that I rarely use, such as my draw knife and an old block plane I use for scraping glue. 6 Quote
wtnhighlander Posted October 13, 2017 Report Posted October 13, 2017 I'm going to have to build one of these, eventually. Thanks for sharing the process! 1 Quote
wdwerker Posted October 13, 2017 Report Posted October 13, 2017 Now you need to make covers for those ducts so they don't detract from those wicked looking doors ! 2 Quote
..Kev Posted October 13, 2017 Report Posted October 13, 2017 Looking sharp! Looks like you left a little room to grow as well.. Nice job! 1 Quote
Pondhockey Posted October 13, 2017 Report Posted October 13, 2017 Very nice; and over the top stunning for a tool cabinet door! 1 Quote
pkinneb Posted October 13, 2017 Report Posted October 13, 2017 Really nice! Where did you buy your door veneer? Quote
Dknapp34 Posted October 13, 2017 Author Report Posted October 13, 2017 11 hours ago, wdwerker said: Now you need to make covers for those ducts so they don't detract from those wicked looking doors ! Looks like I have to add yet another project to my every-growing list... 11 hours ago, TIODS said: Looking sharp! Looks like you left a little room to grow as well.. Nice job! This has definitely made me realize that I would like to get more planes. I have the basics that I need for the way I work, but there are definitely some nice-to-haves that I would like to pick up eventually. The LV shooting board plane would be nice. It's very specific, but it seems like it would be awesome for shooting. I really like my LV 4 1/2, but it's just too big for some jobs, so I also would like to get a #4. I have wanted to get a shoulder plane for a while, but now that I have a domino, it seems less critical. More hand saws are definitely on the list too. I typically break down rough stock with a jig saw for cross-cuts, but there are times when I think a cross-cut hand saw would just be easier than having to get out the jig saw. One of the reasons I really liked this design for the tool cabinet is that it allows me to completely change things around as my tool collection grows. 10 hours ago, pkinneb said: Really nice! Where did you buy your door veneer? The veneer is from veneersupplies.com. I was very happy with the experience of buying with them. Delivery was fast and the veener was exactly as described. I would buy from them again. Quote
woodbutcher Posted October 13, 2017 Report Posted October 13, 2017 I like the way you incorporated the jointer plane into the plane till. Leaves all that space underneath it for smaller planes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.