Coop Posted March 21, 2025 Report Posted March 21, 2025 Those things scare the bejabers out of me. Nuff said. 1 Quote
Popular Post Chestnut Posted March 21, 2025 Popular Post Report Posted March 21, 2025 Spent a couple hours working on a cabinet for our entry way. I'm Testing out the build the face frame first theory. It so far is working great. Honestly feels easier than carcass first. 18 hours ago, Coop said: Those things scare the bejabers out of me. Nuff said. ? 4 2 Quote
Popular Post wtnhighlander Posted March 22, 2025 Popular Post Report Posted March 22, 2025 I could use a chipper, what with all the pine branches dropping in my back yard. Today, though, I started with the "poor man's" stump grinder. Cody and I felled this cypress a couple weeks ago, but weather and work schedule delayed the clean up. I managed to get 6 holes, 1" x almost 6" deep, from one 2ah battery charge. 6 Quote
roughsawn Posted March 22, 2025 Report Posted March 22, 2025 What will you pour into the holes? I take the chainsaw and plunge the bar in, in a series of slots. It speeds up the rotting process. 2 Quote
Tom King Posted March 22, 2025 Report Posted March 22, 2025 The chipper I rented was only 35 hp, but the infeed chute on it was big enough to take in a whole person. It also had a last chance safety bar, but I was glad to be finished with it. We pulled the underbrush and small trees up with the Bobcat, and fed the whole things in stump and all. I did carry it back with sharp blades though. I used to do that with stumps but discovered Tordon RTU. Put it on as soon as you cut the tree down and the roots are rotten in three years. It has blue die in it so you can see that you get all the sapwood covered. Then push the stump out of the way with the loader and drag the box blade teeth through it to drag out the remnants of any roots. 2 Quote
wtnhighlander Posted March 23, 2025 Report Posted March 23, 2025 5 hours ago, roughsawn said: What will you pour into the holes? I take the chainsaw and plunge the bar in, in a series of slots. It speeds up the rotting process. I thought about the chainsaw, but hate to risk running the chain into the dirt. Not sure yet if I will use something like Tom mentioned to rot it out, or just dig around it and chew into it with the drill until it is below grade. The cypress is pretty soft. For anyone who thinks cypress might make a pretty ornamental for your lawn, forget that idea, right now! These things send roots at least 3 to 4 times the diameter of their branch spread, and eventually try to grow 'knees', terrible to mow around. The roots not only griw into sceptic lines and choke them, they can get under concrete slabs, or into brick fountation joints, and break them apart. 2 Quote
Tom King Posted March 23, 2025 Report Posted March 23, 2025 They also shed a horrible mess every year. One of the old houses I redid had a couple planted in the back yard. Those knees were terrible on mower blades. When the knees started growing you couldn't see all of them once the grass grew a little taller than the new knees. I wondered if the roots would keep growing after cutting the tree down but never heard anyone say one way or the other. Tordon will kill all of them. 2 Quote
wtnhighlander Posted March 23, 2025 Report Posted March 23, 2025 Tom, I don't think they keep growing, but without using some chemical accelerator, the roots take a loooong time to rot. I still have little knees poking up in a flower bed, from a tree that was felled 10 or 12 years ago. Solid as ever. 1 Quote
Tom King Posted March 23, 2025 Report Posted March 23, 2025 Here's the killer. RTU stands for Ready to Use. You squeeze it right out of the bottle all along the sapwood right after you cut one down. It's really strong stuff, so you don't want to use enough to get in the ground other than on what you're trying to kill. It's one of the few things I've ever found to kill Sweet Gums. I'm kind of surprised that it's even available on Amazon and that you don't need a license to use it. To kill nuisance saplings, I drill a couple of holes in the tree in the Fall when the sap is going down and squeeze it into the holes. I've killed really big Sweet Gum trees with it with a bunch of holes around the trunk. https://www.amazon.com/Tordon-RTU-Herbicide-QT-Size/dp/B008QYMNU2/ref=sr_1_1? 1 1 Quote
wtnhighlander Posted March 23, 2025 Report Posted March 23, 2025 This hurts to see. Residential property being cleared for commercial development. As if we need another Dairy Queen or Dollar General store. There are at least 8 stumps, ranging from about 36" to near 60" diameter. These trees were healthy, and larger than the one in the foreground of pic #1. I saw one in passing yesterday, split open by the excavator, revealing about 14 feet of the straightest, clearest red oak one could hope for. That trunk was almost 4' in diameter. Nothing left now,but mulch. 7 Quote
Popular Post Botch Posted March 24, 2025 Popular Post Report Posted March 24, 2025 On 3/22/2025 at 4:38 PM, Tom King said: I used to do that with stumps but discovered Tordon RTU. Put it on as soon as you cut the tree down and the roots are rotten in three years. It has blue die in it so you can see that you get all the sapwood covered. Ah, Thank You! Last week I'd reserved a chainsaw from Home Depot on Monday morning, to remove some cottonwoods on Tues. along my rear fenceline that got away from me last spring because I'd thrown out my back. At noon there was a knock on my door, and it was the local power company. They wanted to cut those cottonwoods out as the power lines were directly overhead, I said Sure! (Great Karma, with that kind of timing, rarely happens to me). They cut everything down, drug everything out to the street and chipped/hauled everything away; no charge! I cancelled the chainsaw reservation. When I walked out later that afternoon to look at things, I noticed all the stumps were a brilliant blue. I thought it might be a herbicide, but noticed a bunch of chainsaw shaving off to the side, and they were also blue, so I was wondering if it was some kind of mineral deposit within the wood. Asked on a couple other forums and nobody knew (my apologies for not asking here, d'Oh!) One quick question: they left behind a few chunks behind, about 6"-8" dia x 2~3' long. Has anyone ever worked with cottonwood before? I imagine it's a soft hardwood, but because I mostly do smaller projects it might be fun to play with after airdrying it a couple years, and the price is right. (I have a 10" x 6' trunk of Russian Olive from my neighbor's yard, it's been drying for about 6 years now; I'll have to scan it carefully for nails before slicing it down, and need to hurry while I can still lift the damn thing). 3 Quote
wtnhighlander Posted March 24, 2025 Report Posted March 24, 2025 I've heard cottonwood is nice for carving / sculpting. 2 Quote
Chestnut Posted March 24, 2025 Report Posted March 24, 2025 20 hours ago, wtnhighlander said: cleared for commercial development #1 cause of deforestation in the US. All the other claimed causes end up leading to more treees being planted than used. 12 hours ago, wtnhighlander said: I've heard cottonwood is nice for carving / sculpting. It can be stringy or fuzzy at times so it's not as good as basswood but is pretty soft with minimal grain. 2 Quote
Tom King Posted March 24, 2025 Report Posted March 24, 2025 Were all the chainsaw chips blue, or just some? The coloring used in Tordon RTU is a bright blue. If all the shavings weren't blue, they probably sprayed it with something and just used way more than was needed. I don't know anything at all about Cottonwood. If it grows back from a cut stump, they would have treated it. Quote
Popular Post Gary Beasley Posted March 26, 2025 Popular Post Report Posted March 26, 2025 I spent the day working on my Cub Cadet lawnmower. First I put innertubes into all four tires by breaking the outboard bead with a couple of F clamps and tucked the tubes into the gap. Not an easy task, about 4 hours of work. Then on to the oil change, air and fuel filter and new spark plug. Gotta get the blades off tomorrow and sharpen them, then check the leveling on the deck. New battery is on the list too. 4 Quote
Popular Post Tom King Posted March 29, 2025 Popular Post Report Posted March 29, 2025 I need to put a tube in the front tires on my Cub Cadet too. Front tires say max 28 psi. One had been leaking down and I had to fill it before use. I put 31 psi in it a couple of weeks ago and it's still holding, so I put off working on it for now. I had a little time to sit down in the shop yesterday, so went back to work on disabling the locking mechanism in the window shade for Pam's new chair, as posted about several days ago. I was right that there was something else in there that might cause it to lock inadvertently. I took the little ball out, and put it back together, ready to finish that job when I can. It's just a little ball bearing held in place with grease right now. I don't know what to say about someone who can invent something like this assembly to do a strange job of locking and unlocking a window shade-a lot smarter than I am. 5 Quote
Gary Beasley Posted March 29, 2025 Report Posted March 29, 2025 I got my tubes from the local Tractor Supply, had the exact ones needed in heavy duty. Harbor Freight claimed to have them but when I stopped in to look for them they had nothing useful. 1 Quote
Tom King Posted March 29, 2025 Report Posted March 29, 2025 I think I just ordered them off Amazon or ebay. "Town" is a half hour away for us, and I hate shopping. I have them waiting, but that tire is still holding air today. 1 Quote
Popular Post Coop Posted March 30, 2025 Popular Post Report Posted March 30, 2025 I love me some Tractor Supply. Where else can you to find a flat four prong trailer plug, RoundUp and a pair of Carhartt boxer shorts under one roof! 2 2 Quote
gee-dub Posted April 1, 2025 Report Posted April 1, 2025 I seem to have slept most of the morning away. Still recovering from a head cold I guess. When I woke up and it was broad daylight I was shocked! 2 Quote
Popular Post Mark J Posted April 2, 2025 Popular Post Report Posted April 2, 2025 Took my 12" SCM saw blade in for sharpening, today. Thought it's probably time. It's been on the saw since 2004 ! 3 2 Quote
Popular Post Coop Posted April 2, 2025 Popular Post Report Posted April 2, 2025 I got my project in the ground today and ready for the mailman tomorrow. Just have to get a couple of solar lights for the numbers and some kind of plants or rocks for the base. 12 Quote
fcschoenthal Posted April 3, 2025 Report Posted April 3, 2025 I like the black trim on that better than the cedar on the example you posted. It really ties it in more. 1 Quote
Popular Post legenddc Posted April 3, 2025 Popular Post Report Posted April 3, 2025 I've had a very busy last week and a half. Been super busy at work and a had a lot of meetings. Last Friday we drove up to BWI and flew to Orlando. Saturday we went mini-golfing, to the hotel pool and Universal CityWalk for dinner. Sunday and Monday we were in the Universal parks having a great time with the kids. Flew home Tuesday and now I've spent the last day and a half in meetings. Looking forward to a hopefully more relaxing weekend without walking 20k+ steps a day! 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.