Von Posted April 3, 2025 Report Posted April 3, 2025 On 4/2/2025 at 7:47 PM, Coop said: I got my project in the ground today and ready for the mailman tomorrow. Just have to get a couple of solar lights for the numbers and some kind of plants or rocks for the base. Very nice. Something like this is on my someday list. Did you use a plan? TIA 2 Quote
Popular Post Chestnut Posted April 3, 2025 Popular Post Report Posted April 3, 2025 Nice mailbox it'll be a shame when the snowplow takes it out, wait Texas, things are different down there. 4 1 Quote
Popular Post Coop Posted April 3, 2025 Popular Post Report Posted April 3, 2025 On 4/3/2025 at 8:54 AM, Von said: Very nice. Something like this is on my someday list. Did you use a plan? TIA No plan. We were driving in a neighborhood back at Christmas time and saw one similar and I took a pic of theirs and got a couple of other ideas from YouTube. 4 Quote
Popular Post Tom King Posted April 4, 2025 Popular Post Report Posted April 4, 2025 Cleaned the mini-split in anticipation of using it today with a high of 87. This was the only one I could find locally when my Mom had to move in with us in a 3 day notice. I had it professionally installed because I was doing something else that needed to be done. The installer must have hooked the line up to the inside unit and then bent it because there was no slack left to pull it away from the wall. The bib worked okay, but it would have worked a lot better if I'd been able to pull the unit a few inches off the wall. It wasn't too bad of a job to clean, but I'm going to install the next one. Turned it on and it wasn't cooling with a low refrigerant charge code displayed. Hooked my gauges up to it and looked like it had nothing in it but would release some by cracking the adapter. I ran a little bit in it enough to get the pressure up a bit and as soon as the compressor kicked on it lost what refrigerant I'd put in it. It fooled me because it was working fine when we used it several weeks ago for heat and I thought maybe it was just a little low in refrigerant. It did have a leak soon after the guy installed it, but had worked fine for the years since then. I'm ordering a name brand one to replace it with and will do the install myself. This was a cheap Chinese one that no one I know had ever heard of before. It lasted five years. 8 Quote
Popular Post Tom King Posted April 9, 2025 Popular Post Report Posted April 9, 2025 I had a few more minutes to work on that Norwegian recliner that Pam bought. To attach the window shade to cover the footrest mechanism I need to mount a board. Some longer bolts were needed, but the ones in there were some really odd size. They were probably M7, but neither I nor Ace Hardware had any, so I tapped out the threaded holes up to M8. Sometimes a tap handle won't swing where you need it to, so I have a set of 8 point sockets to run taps with. A breaker bar allows you to turn a tap back and forth to break the chips as you need to. This particular size needed was a 3/8 drive, so 3/8 breaker bar. Plywood in place and painted to block off access to the sides and back. 4 Quote
Popular Post Tom King Posted April 9, 2025 Popular Post Report Posted April 9, 2025 Pam managed to get the bobbin holder mechanism in the Consew 146RB industrial sewing machine really screwed up by having too much lint around it to the point that it jumped out from under the heavy spring arm holding it into position. I looked for a service manual online and found an operating manual which covered everything. The bobbin holder inside the hook mechanism that moves the thread coming off the bobbin was jambed up inside the case. Once I got it all cleaned up and turning freely, there was not any specific location to put it back into. There are just two small machine screws holding it to the shaft that turns it back and forth. I always thought getting the timing off on a sewing machine was a very bad thing to happen and here we were clueless. Fortunately setting the timing was the simplest thing to do with the fewest steps in the manual. I oiled everything up, set the timing according to the crude drawing in the manual and had Pam try it on some scrap. It ran smoother than I had ever it run before and I now know how to set the timing on a sewing machine. I know a few of you have industrial sewing machines, so don't be intimidated if you have to work on it. Find the manual for yours online and get a good quality screwdriver the size of a sewing machine screwdriver. All I needed to do anything about it was that screwdriver. OIl it frequently too. I asked Pam when she had last oiled it and she said she didn't think it had been over a year. One of the first things the manual tells you is to oil it every day. 4 Quote
Popular Post Coop Posted April 10, 2025 Popular Post Report Posted April 10, 2025 Gotta like it when things go sew well! 4 Quote
Popular Post Tom King Posted April 12, 2025 Popular Post Report Posted April 12, 2025 Today I gave a one hour talk on what things were like in this part of the country right around the time that the Declaration of Independence was written as a start of some number of days of events in Historic Halifax, NC celebrating the 250th Anniversary. It was attended by a surprising group of interested people of all types. As I told of some of the different states laws dealing with freed slaves, a few of the white people got up and walked out, but at the end, most people came up to shake my hand and told me they had heard things they'd never heard before. I told them to start with that I was going to talk about history, but it was not history that any of them had been taught in school. I had some of the books I was pulling information from and showed them that they had been written in the 18th, 19th, and early 20th Century. I filled in parts that had been left out of the history they had been taught in school. I think it was very well received, for the most part. I had prepared a PowerPoint presentation, but the talk was in a mid 18th Century church that had way too much light to be able to see much on the screen, so I had to wing it and just talk. People that know we well know that I don't talk much and am certainly not a professional talker. They had told me they wanted me to talk for an hour and when I wrapped up and pulled my phone out of my pocket it said 12 noon on the dot. Started at 11. Some professional historians that were in town to give other talks came up to talk after it was over were surprised when I told them that my education on this had come off ebay. I buy about 150 old history books every year off ebay for a few dollars a piece. They all said they'd heard stuff from me this morning that they'd never heard before. I'm sure they were all Ph.D.'s in history, but I didn't ask. 10 Quote
Popular Post Coop Posted April 12, 2025 Popular Post Report Posted April 12, 2025 The fact that you could talk to an audience for an hour is amazing. Would have loved to have been there. 3 Quote
Popular Post wtnhighlander Posted April 13, 2025 Popular Post Report Posted April 13, 2025 Just hung around the house and 'sawed some logs'. (zzzzzzzzz) No, not THAT kind ... THIS kind. Wrong kind of saw, but cypress is soft. Got a straight kerf established, and sawed maybe 20% down the length. Having recently rolled over 60, I realize this is kind of stupid, but I do enjoy taking on a challenge with nothing but sharp steel and muscle. 6 Quote
Popular Post Coop Posted April 14, 2025 Popular Post Report Posted April 14, 2025 You’re a gluten for punishment but, that kind of work sure beats the heck out of the 8:00-5:00 that pays the bills! 4 Quote
Popular Post drzaius Posted April 14, 2025 Popular Post Report Posted April 14, 2025 BBQ time! Half done: All done: 10 Quote
Popular Post drzaius Posted April 14, 2025 Popular Post Report Posted April 14, 2025 That turned out to be the best batch of ribs I've ever done. Smokey, so tender, and dripping with goodness. 5 Quote
legenddc Posted April 16, 2025 Report Posted April 16, 2025 Well now I want ribs. Thanks for that! Started disassembling my planer last night. Going to clean the rollers because some boards seem to get stuck and need to be pushed through. Everything seems to be mechanically fine. If cleaning the rollers and waxing the bed doesn't help I guess the next step is replacing the rollers. Quote
Popular Post Tom King Posted April 17, 2025 Popular Post Report Posted April 17, 2025 I'm calling it done on the beach for this year. The old water's edge was to the left end of the red dirt you see in the picture on the far side of the beach. I have the sand pretty clean on the beach and a good ways out but I want to bring up enough sand to make the beach part as wide as it was. The sand is three or four feet deep in the cove as far out as you can walk on the bottom. Right now it goes out pretty level and drops off all of a sudden. I want to change the taper of the bottom to get deeper quicker, and use that sand to enlarge the beach. The first renters of the season come Friday, so I'm going to leave it like this for this year. It's a lot better like it is than it has been as long as we've been working on it. The plan is to buy an old inboard ski tournament boat to blow off the bottom farther out and move more sand in to make the beach wider. I passed up on some that I should have bought this past Winter, but now all the prices are four times as much as some I passed up. Next Winter I will know more what to look for. I want one that runs and doesn't have rotten stringers but don't care what it looks like or what condition the seats are in. Some like ones I passed up for 3500 and 4000 are going for 10k and up now that the season is here. We tried a jet ski a while back and it did okay for cleaning off the surface of the bottom, but a boat prop angled down would be a lot better at moving sand. 6 Quote
Coop Posted April 17, 2025 Report Posted April 17, 2025 Hopefully others have the same question or the answer is so simple, everyone already knows. How do you keep the boat in place while you direct the blow? 2 Quote
Botch Posted April 17, 2025 Report Posted April 17, 2025 @Tom King Is there any chance your history talk was recorded? I'd really love to hear/see it. (for some reason the direct quote function on this forum isn't working for me) 2 Quote
Popular Post Tom King Posted April 17, 2025 Popular Post Report Posted April 17, 2025 There are some three foot plus diameter Pine trees to tie it to, and I have some long really strong ropes for tree work. When I was a teenager working pumping gas at a marina here on the lake, every Spring there would be a lot of sand in the cove where the gas dock was that washed in making it too shallow for some boats. I'd tie my ski boat to the dock with a bunch of bumpers protecting it, put it in gear and let it run for a while. Didn't even have to rev it up much and it would move a lot of sand out of the way in a short while. The talk wasn't recorded and I'm glad it wasn't. When it was too bright in there from the large stain glassed windows to use my PowerPoint, I had to improvise and as a result left out some details that I regret. It would have made a lot more sense if I had been able to follow my plan outlined by the PowerPoint. 3 Quote
legenddc Posted April 17, 2025 Report Posted April 17, 2025 Been a crazy last few days over here. My work had some layoffs that I thankfully avoided. For some reason they let go of a bunch of people who deliver what we sell. Not sure why we fired people who earn us money and take 18-24 months to get trained. Went for a walk yesterday with my wife during lunch. Apparently the loud noise I heard Tuesday wasn't a branch hitting my neighbors truck but instead a tree falling through a house a street away. Thankfully nobody was hurt. About 1/3 of her townhouse has gone from 3 stories to 1. The lady was working in her basement directly underneath where it hit. The tree fell from behind her house where it's only 2 stories above ground. The roots that pulled up out of the ground were 30' wide. The end-unit town house right next to her was also damaged and talking to the guy on the other side he said he has cracks in all his drywall. Will be interesting to see how they fix everything. No idea how you coordinate that with insurance companies and neighbors. 1 5 Quote
Popular Post pkinneb Posted April 19, 2025 Popular Post Report Posted April 19, 2025 Finally got a break from work, the first two weeks of April were even more nuts than usual. Knocked out a quick platform for the Michael Fortune #1 chair I will be showing in the MN Woodworkers Guild Annual Northern Woods Exhibition this coming week. Then put together my wife's new deck furniture Just need to add the top after I move it to the deck. Also smoked some BBQ ribs... Now off to see if the Wolves can beat the Lakers 7 Quote
fcschoenthal Posted April 20, 2025 Report Posted April 20, 2025 Nice little white car. You got another Bimmer up above? 1 Quote
Coop Posted April 20, 2025 Report Posted April 20, 2025 @pkinneb, good luck at the exhibition! I’m sure your chair will be a standout! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.