Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Von's shop tour and setup log

Featured Replies

I've got the same jointer, but an older version (bought in '95), that I've been trying to get rid of and almost can't give it away. I did buy a 6" Grizzley floor model with HH, so mine really needs to go. A long time ago I added infeed & outfeed tables to it, so it's got a 4' bed.

  • Replies 387
  • Views 75.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Immortan D
    Immortan D

    Count me in... I have enough "nice to have" tools that I never use. Things like the Starrett trammel set:   I never used that thing, not once, and I had it for many years.

  • Finally got some shop time yesterday and make progress on the in feed table. A got a couple of clamps and also some adhesive silicon pad. Building on the advice from wtnhighlander and Mark J, I replac

  • I'm blaming gee-dub for this upgrade :-) More seriously, in making the urn I was doing a bunch of micro-tweaking of my router fence to dial in the rabbet on the top and remembered his recommendation o

Posted Images

  • Author
On 3/13/2025 at 4:45 PM, fcschoenthal said:

I've got the same jointer, but an older version (bought in '95), that I've been trying to get rid of and almost can't give it away. I did buy a 6" Grizzley floor model with HH, so mine really needs to go. A long time ago I added infeed & outfeed tables to it, so it's got a 4' bed.

As a data point, I basically gave it away for $50 on Craigslist pretty quickly. I'm finding CL much better than FB for selling things. Seems like the latter has way too many people who want to waste my time.

Sounds like a good replacement!

On 3/13/2025 at 8:01 PM, wtnhighlander said:

I have that same jointer. Parked on a shelf in my garage. Haven't used it in a couple years.

Kinda like my treadmill, they are a pain to dust.

Facebook marketplace is really frustrating. I've posted things before and get no response and then 3 weeks later I get a ton of responses. Nearly impossible to find stuff too.

  • Author
On 3/14/2025 at 10:04 AM, legenddc said:

Facebook marketplace is really frustrating. I've posted things before and get no response and then 3 weeks later I get a ton of responses. Nearly impossible to find stuff too.

+1

  • Author
  • Popular Post

With the weather so nice, I've been striving rather unsuccessfully for shop time. Got a little last night and installed my Kapex Cube which arrived earlier this week. For those who don't want to click, it's the black fence that provides a zero-clearance backer and costs a couple hundred bucks.

For anyone who wants to argue that it's a couple hundred bucks to do what one could do with a piece of 1/2" plywood to make a fence, I agree. I debated a while with myself before ordering it. What I've learned to accept about myself is safety has to be convenient or I'll eventually take shortcuts and I decided the Cube will let me quick change between angles. And I tend to use my miter saw for lots of small parts and have had some close calls with the stock fence and offcuts getting sucked into the gap (the physics of what is "long enough" is not always obvious to me). And I also did debate if I was ready to give up the miter saw for hand tools - I do more and more at the workbench with a handsaw these days and often prefer that - or my table saw sled, but am not quite there. So, I paid. Right choice for me, but clearly may not be for others.

PXL_20250318_204310455.thumb.jpg.939ab8bce3b1fd6627abdc0a03dbe3b4.jpg

Installation was easy. Four bolts. I clamped a straight edge against the stock fence before removing it and that let me butt the new one right against it rather than futzing with alignment. I've done a few 90 degree test cuts so far and don't see any loss of precision. Cuts are clean as you would expect (without a precut, the top of the piece is the roughest edge).

PXL_20250318_162323143.thumb.jpg.4dbc2795d061c08462b9b006c2c82173.jpg

When you need a replacement cube I'm sure you can find one to get 3d printed instead of paying $20 a piece for it. Seems like you can add back in the fence extensions to the new fence?

  • Author

 

On 3/19/2025 at 9:25 AM, legenddc said:

When you need a replacement cube I'm sure you can find one to get 3d printed instead of paying $20 a piece for it.

I understand I can readily make replacements from 4x4" material.

On 3/19/2025 at 9:25 AM, legenddc said:

Seems like you can add back in the fence extensions to the new fence?

Yes. Just forgot and did that today.

  • Author
On 3/19/2025 at 4:07 PM, Von said:

I understand I can readily make replacements from 4x4" material.

Confirmed this today. The slot turned out needing to be a little wider than my table saw kerf so I had to sand it a bit. If I do it again, I'll nudge my fence and make a second pass instead.

 

PXL_20250323_184508870.jpg

  • Popular Post
On 3/23/2025 at 7:18 PM, fcschoenthal said:

I've got the Colliflower insert on my SawStop and love it. 

Ditto.  Making you own replaceable inserts is no big deal.  I was going to make my own ZCI with a dovetail receiver slot but, Rockler was blowing out the Colliflowers so I just bought one of theirs on clearance.  I believe there is a new version now.

 

SawStop-Shop-made-ZCI-Inserts (9).jpg

  • 4 weeks later...
  • Author
  • Popular Post

Shop upgrade off of Craigslist: a 14" Grizzley bandsaw replacing my 10" Delta. It has a riser and I'm looking forward to the increased resaw capacity. Unfortunately the guy selling it is doing so because he lost his job and is making the mortgage. I'm giving him my Delta BS and hope it tides him over. A shout out to Marc and Alex Snodgrass for guidance on getting it set up (WW YouTube video).

PXL_20250415_195503274.jpg

  • Popular Post

The 555 is a solid series of machines.  The 14" cast iron bandsaw truly is the sweet spot for any shop.  My brother got dad's old 1950s Delta version.  Tons of after market stuff for them if you should need it.  That machine should serve you well.

  • Popular Post

@Von, please report back on your opinion of resawing with the riser. The only thing I dislike about my 14" saw is that it falls about an inch short whenever I want to resaw something. I hesitate to add a riser, because of some negative opinions I've heard. I hope your experience is good!

  • Popular Post

I’ve had my Grizz G0555X for about 7 years and love it. As part of the purchase price, it came with a 6.5” high fence. On my recent chair build, the back support required 1/16th bent laminated veneer and I cut them 1/8th” to be on the safe side and brought them down to 1/16th on the drum sander. I could have easily gotten closer to the 1/16th on the bs had I known how well the results would be. These veneer pieces were resawn at 5.5” and later ripped to the desired width of 2.5” after the glue up. 

  • Author
  • Popular Post
On 4/17/2025 at 7:24 PM, wtnhighlander said:

@Von, please report back on your opinion of resawing with the riser. The only thing I dislike about my 14" saw is that it falls about an inch short whenever I want to resaw something. I hesitate to add a riser, because of some negative opinions I've heard. I hope your experience is good!

Will do. I'm not familiar with risers so I welcome learning if there is something in particular I should looking out for.

I did some simple 1/8" cuts on some 1" tall stock yesterday and decided the blade was dullish. I ordered a new one, another 3/8" blade to replace what is on it. I plan to try the 3/8" blade for everything and then deciding if a bigger blade is worth trying for resawing because I'm don't want to be changing blades if I don't have to.

  • Popular Post
On 4/17/2025 at 9:52 AM, Von said:

Unfortunately the guy selling it is doing so because he lost his job and is making the mortgage. I'm giving him my Delta BS and hope it tides him over.

That is very unfortunate that he had to do that but awesome of you give him your old one. I will have to keep that in mind if I find myself buying from someone in a similar situation. 

  • 3 weeks later...
  • Author
  • Popular Post

I'm blaming gee-dub for this upgrade :-) More seriously, in making the urn I was doing a bunch of micro-tweaking of my router fence to dial in the rabbet on the top and remembered his recommendation of Rockler's micro adjuster. So I picked one up a couple of weeks ago when I was in Indy and got around to deploying it. I don't have much overhang on my table top, plus some other fence stuff in the way, so I made a little t-track doohickey it clamps to and offsets it for clearance. I expect I will tweak the setup with experience (e.g. add a piece on the bottom to keep it square to the tabletop).

 

PXL_20250505_181530681.jpg

  • Popular Post

@Von - that T-track doo-hickey looks like it works great. A perfect example of how we come up with things that work in our own shops and on our own stuff.

  • Author
  • Popular Post

In addition to installing the iVac Level Meter, I got my Lost Art Press/Crucible Planing Stop installed yesterday. I wasn't sure it was going to work on my 1.5" plywood bench top but I wanted to try it out and figure out if I want to install it in my next bench. 

I haven't given it more than a cursory workout at this point but it seems to work well. I'm glad I recessed it into the top of the block as this gets maximum contact between the block and the hole in the bench over the whole range of travel. And I'm glad I installed the block so that it's braced under the benchtop by a leg and the apron. I still did end up adding a little blocking under the bench to the front to keep it from tipping a little, hinging on the front of the stop, when fully lowered.

(Ignore the half-hole on the edge of the block, it's an oops.)

PXL_20250513_205508117.thumb.jpg.4d5114d7efc871b0f1a3eb75bb2b8308.jpg

Side view showing blocking underneath:

PXL_20250513_210036208.thumb.jpg.092c0222d32c3cef52dd363b06849f4a.jpg

 

  • Author

My table saw is a ~30 year-old DeWalt 745 contractor saw. Obviously this saw has its limitations and I found one yesterday trying to set it up to cut a long miter for a box, which is probably the most finicky cut I make and one I've never been very happy with my results on the saw. With my slowly growing understanding of precision I spent some time yesterday trying to dial it in and think I figured out why.

I started by getting the blade, at 90, parallel to the miter, which I was fairly successful at, getting it within an thousandth or two. Then I swung the blade to 45 degrees and that brought the blade out of parallel by >10 thousandths. Further, if I swing the blade back to 90, it's stays out of parallel by about that much, which tells me the blade mechanism is getting knocked out of parallel by the process of angling it.

I could re-adjust my saw each time I angle the blade, but it's a giant PITA to do that, especially with the blade angled when I have less surface area to work with. I'm inclined to accept this limitation of the saw, leave it at 90, and find other ways to do my long miters. Someone suggested the router table, which I think I'll try next. I know my Kapex does long miters fairly well, but I've always found that an awkward cut.

 

@Von, how long a piece are you trying to miter?

@Beechwood Chip, if the miter is less the SCM throw, say 10", and if you can get some clamps on the workpiece for hands free holding, you could miter on a SCM.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.