sjeff70 Posted May 10, 2014 Report Posted May 10, 2014 Has anyone here looked into buying a Hammer table saw? Hammer (Minimax, Felder) is supposed to be steps above the Asian made machines and are much safer because of the sliding table. If you stay with the entry level Hammer then the cost is comparable to any of the high end Asian made models. I've heard nothing but great things about them but not one peep about them here??? Quote
EdgewaterWW Posted May 10, 2014 Report Posted May 10, 2014 One thing that would stop me is, I can't go kick the tires. I like to shop local. Quote
wdwerker Posted May 11, 2014 Report Posted May 11, 2014 The American location for Minimax is just a few miles from my house . Quote
sjeff70 Posted May 11, 2014 Author Report Posted May 11, 2014 Ah man, wd, that's pretty lucky. There's only a few in the U.S. So what's making the people who are buying them via word of mouth buy them sight unseen? They've got some great videos on their website and on Utube. They seem to be very impressive. Quote
JerrySats Posted May 11, 2014 Report Posted May 11, 2014 Felder USA is about 25 mins away , I keep wanting to go over there and test some machines out . I think one reason you don't here much about these machines here is the price, not many hobby woodworkers are going to spend that kind of money on a shop full of machines let alone one machine . However there are a few guys that hang out in the chat here that have highend TS like these . Stop in chat some night and see what they think . Quote
krtwood Posted May 11, 2014 Report Posted May 11, 2014 I thought you meant like a hammer drill when I read the topic... I was like.. wwwwhhhaaaaaaaaaaaattttt? Just the thing to rip that 12/4 hard maple. 2 Quote
sjeff70 Posted May 11, 2014 Author Report Posted May 11, 2014 krt, That's really bad then because no one's even heard of them. $3,700 is pretty competitive. I'd be a little cautious about a combo planer/jointer, but the prices are competitive here too; and look at the capacity. I'd love to support them but I'm waiting to see what happens like everyone else I guess. Quote
Trip Posted May 11, 2014 Report Posted May 11, 2014 ==>If you stay with the entry level Hammer then the cost is comparable to any of the high end Asian made models. The entry-level K3 in its most basic configuration is price competitive with the high-end Asian imports or the SawStop... However, very few really consider the 'basic' (31x31) config of the K3 at $3600... Folks start looking at the mid-point K3 (48x48) for obvious reasons -- which is about $4500... And that doesn't get one into your shop... You're pretty close to $5K take-home... Once you move-up to the higher-end K3 and get more of the anticipated benefit of a Euro saw, you're around $6K-$7K. There are a couple of North American WTO members with Euro saws and a few with Hammer... Quote
sjeff70 Posted May 11, 2014 Author Report Posted May 11, 2014 Well, at least they're in the market. Hopefully their presence will have a positive impact in the woodworking market in general. Quote
Midlife Posted December 28, 2017 Report Posted December 28, 2017 I know this is an older thread , but I'm going to Prague again next week for a play day at felder/hammer , I need a table saw and a morticer attachment for the hammer A3 31. Quote
ClassAct Posted December 28, 2017 Report Posted December 28, 2017 Will they fit in your carry-on luggage? 1 Quote
Mark J Posted December 28, 2017 Report Posted December 28, 2017 The only arguement I can see against the Felder/Hammer anything is the price. Maybe somone doesn't like Euro or wants flesh sensing, but I've never heard a bad word. Be very interested in your impressions. For me I would consider a 5 in 1 since I don't have TS, jinter or planner yet and space is always an issue. 1 Quote
Midlife Posted December 29, 2017 Report Posted December 29, 2017 7 hours ago, ClassAct said: Will they fit in your carry-on luggage? I'm only 2 hours away by car to Prague . 1 Quote
ClassAct Posted December 29, 2017 Report Posted December 29, 2017 Totally off-topic: I want to visit more of the Czech Republic. My wife and I loved Praha, everyone was so friendly and it was an experience of a lifetime. Enjoy your visit to Felder! 1 Quote
Llama Posted December 29, 2017 Report Posted December 29, 2017 23 hours ago, Mark J said: The only arguement I can see against the Felder/Hammer anything is the price. Exactly. As the proud owner of the AD941, the price is the only thing that almost scared me away. Now that I've had it for a few months, the price makes sense for what you get. 1 Quote
Craig Rowe Posted January 1, 2018 Report Posted January 1, 2018 On 12/29/2017 at 2:12 PM, Llama said: Exactly. As the proud owner of the AD941, the price is the only thing that almost scared me away. Now that I've had it for a few months, the price makes sense for what you get. I’m really curious about this. What do you get for the extra money? Quote
Llama Posted January 1, 2018 Report Posted January 1, 2018 5 minutes ago, Craig Rowe said: I’m really curious about this. What do you get for the extra money? Extra over which other unit? Quote
wdwerker Posted January 1, 2018 Report Posted January 1, 2018 Pro grade equipment does demand a certain price. 1 Quote
Craig Rowe Posted January 1, 2018 Report Posted January 1, 2018 10 minutes ago, Llama said: Extra over which other unit? Over a quality saw that’s not a sliding European style, like a Sawstop or a Powermatic. Is it the sliding table? Overall build quality? I just got a 3hp Sawstop PCS. It seems like you end up spending close to double for a Hammer. Quote
Llama Posted January 1, 2018 Report Posted January 1, 2018 1 minute ago, Craig Rowe said: Over a quality saw that’s not a sliding European style, like a Sawstop or a Powermatic. Is it the sliding table? Overall build quality? I just got a 3hp Sawstop PCS. It seems like you end up spending close to double for a Hammer. My Felder AD941 is a 16" jointer/planer unit. I can go over why that machine is better than just about anything else out there if you'd like. Quote
Craig Rowe Posted January 1, 2018 Report Posted January 1, 2018 14 minutes ago, Llama said: My Felder AD941 is a 16" jointer/planer unit. I can go over why that machine is better than just about anything else out there if you'd like. Sorry. I thought you were talking about a table saw. I can see how their jointer/planers would be better than one of the Jet or Rikon combo machines. 1 Quote
Popular Post Pwk5017 Posted January 1, 2018 Popular Post Report Posted January 1, 2018 I have a delta unisaw and a felder KF700. I can tell you they are wildly different machines. The price tag is also wildly different. Granted, my felder is a combo with a shaper in it, so that's something to consider, but just the saw K700 has to be 3-4x the price of a new unisaw/PM/Sawstop. In the few months I've had the felder, I made two nightstands, a 4" thick end grain island, a smattering of cutting boards, a few live edge floating shelves, and probably another island/counter or two. I've also disassembled and reassembled most of it along with a thorough cleaning and lubrication--I bought used, couldnt afford $15k. I did more work on my 3phase unisaw when I got it, so I feel like I know the build quality pretty well for both. Right off the bat, the Felder is extreme in build. It weighs 4-5x the delta and everything in it is stout. The trunnions are 2-3x more substatinial, the whole arbor assembly is considerably larger, the arbor itself is 30mm instead of 5/8", the fence rail is solid steel bar stock, and on and on and on. Pretty much everything on it is bigger and better than the cabinet saws I've been in and around. I have a few critiques of some design features on the machine, but all in all the quality and engineering is somewhat in line with the price tag. Keep in mind part of the price is going towards paying a decent wage to skilled workers in the west and R&D. Euro machine companies are continually improving their designs and production standards, while most of the cabinet saws made in the east are virtually unchanged over the last 60 years. That is part of the explanation behind the vast price difference. Up to you how much build quality, innovation, and ethics(to a small extent) play into your decision. Most of the price difference is attributed to the sliding table functionality. They aren't cheap to build to precise standards and it totally defeats the purpose of the machine if your table isn't flat or the carriage isn't straight. I can confirm that sliders are every bit as good as you imagine for crosscutting. I have a 72" long outrigger fence that telescopes to 108", I think. I sold my Kapex when I bought this saw and I'm very happy I did. The stop block on the fence is very robust, which lets you set your measurement and get to cutting. For sheet goods, it will exceed your expectations by leaps and bounds. I had high expectations for this machine across the board, but it blew me away with cutting up sheets of plywood. It really is a dream to work with. I need to make a fritz and franz jig, but so far I can tell you traditional ripping is uncomfortable and awkward. I'm very happy I kept my unisaw, which I now dedicate to ripping and dadoes. My felder can take a dado blade--which is somewhat unusual so keep that in mind if you look at sliders--but it costs a fortune and I already had a Forrest set. Each saw has its pros and cons. Having both, I feel confident saying most people would do just as well with a cabinet saw and a track saw. The price is so steep on the sliders that it heavily skews my opinion. I really love using my machine and I haven't really dipped into the shaper function yet, but it feels way better than I probably need. Having said that, I'll never be without one now! The functionality and smooth precision really make you grin everytime. Every work piece comes out perfectly square, perfectly sized, and perfectly straight. A cabinet saw and track saw will do 90% as good a job as a good slider, so you pay out the nose for the remaining 10% and to do it in half the time with 1/4 the effort. Im still learning on my machine, so take my opinion with a grain of salt. I find the comparison to be more apples to oranges and therefore hard to compare costs. Functionally, sliders do a lot more than a cabinet saw, it's up to you to determine if that functionality is worth the investment to you. 3 Quote
BillyJack Posted January 1, 2018 Report Posted January 1, 2018 Just another tool... Always the price. Most I've seen on the forums with are on the high end of their hobby shop and low end on the business end... Quote
BillyJack Posted January 1, 2018 Report Posted January 1, 2018 How does it compare in price to the other sliders out there? Anybody have a current list? Quote
Mark J Posted January 1, 2018 Report Posted January 1, 2018 I don't have the answer to your question, but there are sliders and then there are sliders. The Hammer sliding table runs up to and almost along the blade. SawStop, for example, makes a sliding attachement that mounts to the fixed cadt iron top, several inches from the blade. Baleigh, Grizzly and others also make sliding tables. What actually intrigues me about the Euro units is not the design of the sliding table, but the idea of a combination saw, planner, jointer. That would be a space saver, and if it uses a single 220V outlet and, dare I think, a single dust port that would be a boone certainly at least worth considering. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.