Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Here we go. Roubo from scratch

Featured Replies

  • Replies 252
  • Views 35.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I like it . I tend to include flaws in an artistic way rather than cut them all out when I have free rein on a client project. I dislike too much wood that has been sanitized into a clear uniform sect

  • Five unimpeded hours in the shop showed nice results. The slabs mounted, Dog access holes cut, the Deadman runner made and installed, the Deadman shaped and holes drilled, gap stop made. Cant w

  • And so it actually begins. First round of milling. This is half of the boards I designated for the top. Darn world series game got in the way of continuing. I started with 4.75" widths. Skip plan

Posted Images

I've already got a maple I started in my side yard 25 years ago but it wouldn't be enough to build a whole bench, maybe not even in my lifetime. Plus I would be giving up my protection from the afternoon sun .

Very nice!  Looks like a lot of hard work but also looks like it would be a ton of fun to run a mill (for a day or two anyways).

  • Author

Bucking boards is fun, when there's a purpose. I wouldn't do it for a job but helping out or cutting my own lumber is a lot of fun.

  • 2 weeks later...
  • Author

with very limited time last night to saw, we got a new cant cut and about 60 more BF of sticks cut before loosing the light.  one more short session should get the remaining BF cut out that I need, then the wait really starts. I'm not sure what im going to do with the remainder of the log. Thinking that 6/4 slabs would be the most utilitarian for me.

  • Author

Had some time Sunday afternoon so I met my buddy over at the mill yard. We got two more smaller cants milled up and a quick measurement of the stacks looks to be about 240 board feet in 8/4  4.5"x 8' & 9.5"x 8'. With those sizes, there shouldn't be too much waste, I'm hoping.

I brought my moisture meter and a few deep measurements (pins buried) on the stack we cut a few weeks ago read 19%

Edited by Brendon_t

  • Author

5abcd5972a527f8dc7605c405504d63f.jpgca617f8d4cb923455ffcec47ef09bd87.jpg The two stacks on the end are mine, plus the ash stack a few stacks down. Sent from my iPad using Tapatalk

Tom, I'm not convinced yet that the shelves will be made from the ash. Thinking some darker color. Maybe redwood.

Don't know if it's a problem in LA but around here you have to kiln dry ash to a certain temperature to kill powder post beetles and their eggs. If you don't they can stay dormant in the wood for years then suddenly wake up and leave your bench with a bunch of holes.

       I've heard from several sources that getting your ash bored is not fun!

       I've heard from several sources that getting your ash bored is not fun!

at least not for most of us

  • Author

Great looking stack of lumber!

Thanks, the 9&10" boards are going to be mostly for the top. They are all clean and clear throughout. The thinner boards, mostly 4.5-6" will be legs and stretchers and everything that is not the top. We got creative with some cuts to get the best yield out of the tree. All of the thin boards also have at least a 4.5"x 6' clear cut in them. 

I'm thinking that with 240 ish feet, I should have plenty left over.  Even after the hundred trash bags of chips tom showed me I will make.

Sawing wood is a lot of fun. If I lived somewhere where there was a need, I could totally see myself buying a woodmeizer and milling wood for fun/ pay. 

Edited by Brendon_t

Sawing wood is a lot of fun. If I lived somewhere where there was a need, I could totally see myself buying a woodmeizer and milling wood for fun/ pay. 

Move to Canada and be Shane's neighbor. =p

  • Author

Not gunna happen, I have way too many guns to "loose" if I move to Canadia.

 

i would have loved having a mill on the farm I grew up on in the Ozarks. 150 acres of hardwood timber.

i had a tree stand in an old white oak that was 8 feet across. In his youth, my stupid uncle took a chainsaw to the first main crotch and carved in a chair. More like a throne.. A butt cushion and I could sit in that stand all day.

Edited by Brendon_t

I only made 300 gallons of saw dust. I'm sure I gave away 15-20 board feet of shavings Sent from my 831C using Tapatalk

That stack of lumber is seriously sexy. Just seeing it makes me want to mill some lumber. You must have had a blast. It looks like alot of checking in the photos, did you treat the ends?

Whoa whoa whoa... You grew up in the Ozarks? Can you be more specific?

  • Author

Yeah shane, one log had one end forget to be anchorsealed.  The boards with check, are  extra long.  And I'm not paying for the extra foot,  since my buddy forgot to do it. 

 

And yes V, I grew up in a tiny town in SW Missouri called Purdy. Closest town is monet. Closest real city is Joplin, where I was born. 

Edited by Brendon_t

Wow! I'm envious. I'm really looking forward to this build. I love working with ash. I made the base of my bench from ash, but the top from maple. Wish I had done the whole thing in ash. Hard maple is such a pain.

  • Author

Thanks man, I'm looking forward to it also.  I think ash is a good choice, and the price is definately right.

And yes V, I grew up in a tiny town in SW Missouri called Purdy. Closest town is monet. Closest real city is Joplin, where I was born. 

Very cool.  We rarely ventured that way except for the regular trips to Branson. I grew up in Salem, MO...just south of Rolla.  Beautiful country down there. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.