Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Here we go. Roubo from scratch

Featured Replies

  • Author

Sorry,  didn't notice,  no the edges aren't undercut and it's really not thin at all.  Finished thickness is  a bit under 1.5". It also has 3 stretchers running long wise for support.

  • Replies 252
  • Views 35.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I like it . I tend to include flaws in an artistic way rather than cut them all out when I have free rein on a client project. I dislike too much wood that has been sanitized into a clear uniform sect

  • Five unimpeded hours in the shop showed nice results. The slabs mounted, Dog access holes cut, the Deadman runner made and installed, the Deadman shaped and holes drilled, gap stop made. Cant w

  • And so it actually begins. First round of milling. This is half of the boards I designated for the top. Darn world series game got in the way of continuing. I started with 4.75" widths. Skip plan

Posted Images

  • Author

Yeah I see it now,  no idea how it for that effect.  That board just went home last night. I had a bunch of projects that were finished or almost finished just cluttering up my shop.  After finishing the most recent order of 6 cutting boards, I decided I needed to clear all of those out. 

I hardly ever look down here. Am just seeing this. I could have made several a hole remarks by now! Looking good Dude!

  • Author

No worries ken, I get the same thing.  I have to specifically come look for this area.  Often forget it is here. I wish it feed into the normal area. 

  • 2 months later...
  • Author

It's getting close.. I cut my "tester" board in half yesterday and it is measuring 6%.

Apparently the super dry ca weather is helpful in one way.

Atta boy B.  Can't wait to see you start this thing.  Now that Mike is done with his, we're currently violating the WTO bylaw that we need to have a Roubo journal going on at all times.

  • Author

I suppose it's actually time to start acquiring all the stuff. Spiral bits,  huge ass forstner bits, the big flattening bit ,ooh yeah, vise hardware. .  Hold onto your wallets kids, it's gunna be a wild ride to amazon. .

3 minutes ago, Brendon_t said:

I suppose it's actually time to start acquiring all the stuff. Spiral bits,  huge ass forstner bits, the big flattening bit ,ooh yeah, vise hardware. .  Hold onto your wallets kids, it's gunna be a wild ride to amazon. .

For the big 2 3/4" forstner bit and the big flattening bit - if you wanna borrow mine I'm happy to ship them to you.  Just pay round trip shipping.  Pretty sure they will both fit in a small flat rate box.  At least the router bit will.  When you get to that point let me know.

Also when you buy your spiral bit, make sure you buy the one with a 2" cutting length, otherwise it won't be long enough to cut the vise cavity.  This is how i ended up with two 1/2" spiral bits.

36 minutes ago, bgreenb said:

Atta boy B.  Can't wait to see you start this thing.  Now that Mike is done with his, we're currently violating the WTO bylaw that we need to have a Roubo journal going on at all times.

Yup, Brandon and Janello are now heading to the starting line. 

  • Author
21 minutes ago, bgreenb said:

For the big 2 3/4" forstner bit and the big flattening bit - if you wanna borrow mine I'm happy to ship them to you.  Just pay round trip shipping.  Pretty sure they will both fit in a small flat rate box.  At least the router bit will.  When you get to that point let me know.

Also when you buy your spiral bit, make sure you buy the one with a 2" cutting length, otherwise it won't be long enough to cut the vise cavity.  This is how i ended up with two 1/2" spiral bits.

That would be awesome b and I'll proabably take you up on it.  Be aware though, things I borrow are usually returned with booze.. coop can attest.

5 minutes ago, estesbubba said:

Yup, Brandon and Janello are now heading to the starting line. 

Its been a great help to be able to watch you guys kill it first.  It'll still be a minute before I start as I'm heading into a big professional change come Jan 4 so I may have to let that calm down before jumping in with two feet.

35 minutes ago, Brendon_t said:

That would be awesome b and I'll proabably take you up on it.  Be aware though, things I borrow are usually returned with booze.. coop can attest.

Lol.  Can't argue with your methods there!

  • Author

I just got hardware blocked. Apparently  benchcrafted shut their online store down until the 1st. I went to buy my hardware  and they say NO leg vise for YOU..

 

9 minutes ago, Brendon_t said:

I just got hardware blocked. Apparently  benchcrafted shut their online store down until the 1st. I went to buy my hardware  and they say NO leg vise for YOU..

Order from highland woodworking.

On 12/30/2015 at 2:03 PM, bgreenb said:

Also when you buy your spiral bit, make sure you buy the one with a 2" cutting length, otherwise it won't be long enough to cut the vise cavity.

I hope I didn't cut off my nose to spite my face. I got the Whiteside RU5150 1.5 cutter 3.5 overall. 

I think it'll work since it's 3.5 long, Might have to clear out in layers.

Marc used this >> 106-0835 1/2" 1-1/2" 3" 1/2" up 

so I assume mine will work.

2 hours ago, Janello said:

I hope I didn't cut off my nose to spite my face. I got the Whiteside RU5150 1.5 cutter 3.5 overall. 

I think it'll work since it's 3.5 long, Might have to clear out in layers.

Marc used this >> 106-0835 1/2" 1-1/2" 3" 1/2" up 

so I assume mine will work.

I used the RU5200 which has 2" CL for my Roubo. There are some 2" deep mortises, and while a 1.5" CL bit would have enough reach, I don't know how well it will extract the chips. If you haven't used the bit, I would exchange it for the 2" to be safe. Others might know if a 1.5" bit will work. 

I just noticed Whiteside has a 3 flute for that bit which would be nice. 'wn15' will get you 15% off:

http://www.hartvilletool.com/product/5110/up-cut-standard-spiral-router-bits

  • Author
On 1/4/2016 at 11:09 AM, estesbubba said:

I used the RU5200 which has 2" CL for my Roubo. There are some 2" deep mortises, and while a 1.5" CL bit would have enough reach, I don't know how well it will extract the chips. If you haven't used the bit, I would exchange it for the 2" to be safe. Others might know if a 1.5" bit will work. 

I just noticed Whiteside has a 3 flute for that bit which would be nice. 'wn15' will get you 15% off:

http://www.hartvilletool.com/product/5110/up-cut-standard-spiral-router-bits

I'm ordering one of those mike. The 2" deep hand held mortises are already freaking me out a bit. Hopefully having another cutting edge will just stack into the makes you feel better about it category. 

The project is fun except for all the deep mortising. Before each routing session think through the cuts and bit direction. Even doing this the bit is going to try and take off at times - at least it did for me. Hold the router tight, don't wear your favorite underwear, and good luck!

  • Author

Good advise.  I had a 2" straight bit grab into r oak on me about 1.5" deep and I'm pretty sure I soiled my unders with some left over for a soggy sock.

12 minutes ago, Brendon_t said:

Good advise.  I had a 2" straight bit grab into r oak on me about 1.5" deep and I'm pretty sure I soiled my unders with some left over for a soggy sock.

I think the router scares me more than the table saw. High RPM bit + potentially tippy/unstable situations + propensity to grab and then want to turn into a bladed tornado...no thanks. I'll keep my router in my router table, and if I need to do a router-like task outside of table, I'll go the hand tool route.

16 minutes ago, Al Capwn said:

I think the router scares me more than the table saw. High RPM bit + potentially tippy/unstable situations + propensity to grab and then want to turn into a bladed tornado...no thanks. I'll keep my router in my router table, and if I need to do a router-like task outside of table, I'll go the hand tool route.

To increase safety helps having a router with a trigger on the handle of the plunge base and magnetic brakes.

Enough already!  We need to see some pics of progress! 

;)

 

  • Author

Yeah I know,  my goal is to get ten pages of crap before I actually start the project. .

I'm in the buying things phase and mentally prepping. I just made a big move professionally and am kind of in a tornado right now for that.  I'll be heading to the east coast here soon for about 6 weeks. Hoping to start when I get back. 

Since the jointer is down due to bearing failure,  I sent all my blades out for sharpening. 

It'll start soon bud. 

Light passes and consistent fence pressure are the keys to safely doing those deep mortises.  If you follow both of those rules there's little chance of problems.  Try to hog out too much or let your bit start to wander...yeah, get out the wet wipes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.