Adam Thekruser Kruse Posted March 1, 2016 Report Posted March 1, 2016 So, I have a good friend who posed a question to me a few weeks ago. He does not own a jointer or a planer. I have both (though if you read thru the forum, I am not having good luck with my planer). He asked me which would be the better investment for him. I, without hesitation, told him jointer. I use my jointer on almost every project. However, I would probably use my planer on every project as well if I could figure out what was wrong with it. I just want to make sure I didn't steer my friend wrong because I am biased due to not having a well-functioning planer. Your thoughts? Quote
Coop Posted March 1, 2016 Report Posted March 1, 2016 IMO, if you're working with milled lumber, then the planer would come first. With rough sawn, as Frank Sinatra would say, " you can't have one without the other". 1 Quote
Brendon_t Posted March 1, 2016 Report Posted March 1, 2016 I'd be about worthless with only one as I'm sure as heck not don't the operation the other machine is used for, by hand. 1 Quote
Popular Post Janello Posted March 1, 2016 Popular Post Report Posted March 1, 2016 Yeah, the jury on this has been out before and there was a ruling by The Honorable Judge Eric that you need both. All that disobey will have to do hard time at the Crooked Fat Board Detention Center. 3 Quote
Chet Posted March 1, 2016 Report Posted March 1, 2016 19 minutes ago, Janello said: Yeah, the jury on this has been out before and there was a ruling by The Honorable Judge Eric that you need both. All that disobey will have to do hard time at the Crooked Fat Board Detention Center. +1 Quote
wdwerker Posted March 1, 2016 Report Posted March 1, 2016 Marginally planer could go first but jointer is next and soon too ! 2 Quote
Pwalter5110 Posted March 1, 2016 Report Posted March 1, 2016 I agree with wdwerker. You can get by using a planer sled to flatten boards, although it would be a pain, and a straight line ripping jig on a table saw to straighten one edge, but there is no way I would want to dimension wood without a planer. Ive seen some guys flatten one side with a handplane and then run it through the planer to dimension. But a jointer it pointless without a planer. IMO Quote
Soul Woods Posted March 1, 2016 Report Posted March 1, 2016 Another one for both...but it might depend on the project and what you consistently start out with for lumber. You might not need super precision and find great S3S (in the right thickness) wood that you only need to straight rip. Quote
knotscott Posted March 1, 2016 Report Posted March 1, 2016 Both is best, but IMO the planer is the better place to start simply because it can be coaxed into some of the flattening functions of a jointer with the help of a planer sled. The opposite is not true. 1 Quote
tedfmcm Posted March 1, 2016 Report Posted March 1, 2016 2 hours ago, knotscott said: Both is best, but IMO the planer is the better place to start simply because it can be coaxed into some of the flattening functions of a jointer with the help of a planer sled. The opposite is not true. +1...you really need both for an efficient workflow. However, you can get buy with just a planer by roughly hand flattening boards or using a sled on the planer...i did this for a couple months and it was very much less than ideal. That said, a serviceable jointer is much more than a planer, (e.g. Dewalt 735). Quote
Cliff Posted March 1, 2016 Report Posted March 1, 2016 1 hour ago, Llama said: Obviously the domino comes first... Will pay money to see a video of someone flattening and squaring a board using Domino. 1 Quote
mds2 Posted March 1, 2016 Report Posted March 1, 2016 Planer first for sure. It is a absolute workhorse, but the reason why he wants it first is because you can joint with several other tools. I can think of 4 jointing techniques that dont use a jointer right off the top of my head. Quote
Eric. Posted March 1, 2016 Report Posted March 1, 2016 I agree with Scott and several others...if you have to buy one first and then the other, the planer is first because it can do a few things on its own. However its full usefulness is not realized until you have the jointer to go with it. A jointer without a planer is about as useless as tits on a boar. Quote
Llama Posted March 1, 2016 Report Posted March 1, 2016 2 hours ago, Cliff said: Will pay money to see a video of someone flattening and squaring a board using Domino. How much Quote
Cliff Posted March 1, 2016 Report Posted March 1, 2016 Fraid I gotta lowball you and go with $20 On account of there is a Powermatic sale coming up and I am kind of liking the PM701. Quote
Barron Posted March 1, 2016 Report Posted March 1, 2016 Planer. It really isn't hard to get one side flat enough to run through a planer with a hand plane. Getting an edge to 90 degrees isn't hard either, though it does take more practice. Even if the board isn't at 90 degrees you can can use the table saw to square it up as long as one edge is straight and the sides are flat and parallel. Quote
jussi Posted March 2, 2016 Report Posted March 2, 2016 If I could only get one I would definitely go planer first. You can joint the edge or face using other machines, granted it won't be as fast or easy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.